We will reply to your message within an hour.
This general purpose tubing is the industry standard for air and water applications.
Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.
Thick walls give this tubing excellent abrasion resistance.
Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.
An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.
Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.
Move coolant around tight turns in crowded spaces. Made of silicone, these elbows withstand high temperatures up to 350° F.
Commonly known as radiator hose, this hose is for low-pressure coolant applications.
With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.
Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer.
Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
The neoprene coating on this hose holds up under high heat.
Run water, mist, oil, and other liquids through this hose.
Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as axles, shafts, collets, and die holders. It resists fracturing from repeated stress.
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
Offering the highest yield strength of all our brass, 330 has a low lead content for a good balance of machinability and formability. It's used for fire station poles, pump cylinder lines, and plumbing accessories.
Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.
An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.
Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.
This extruded acrylic offers similar performance as cast acrylic at a lower cost.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.
PETG can be formed into complex shapes without sacrificing durability.
Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.
This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.
The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes.
This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.
A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.
Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.
A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4.
Used in turbine bearings, downpipe gaskets, and other machinery, these Garolite tubes withstand heavy impacts and temperatures as high as 500° F.
A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.
Tightly braided nylon fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection.
Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.
Use these tubes as jackets, seals, and insulation in areas where rubbing and scraping could cause wear on rubber. They are made of polyurethane, which combines the shock-absorbing qualities of rubber with the tear resistance of plastic.
Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines.