Filter by
OD
Material
Shape
For Use With
System of Measurement
Maximum Pressure @ Temperature
Fabrication
Maximum Temperature
Bending Method
Compatible Fittings
Temper Designation
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Connects To
RoHS
Minimum Temperature
Specifications Met
Appearance
About Metal Tubing
More
Rigid Aluminum Tubing
Unlike other aluminum tubing, this tubing is rigid and will not bend. It contains manganese for good corrosion resistance, strength, and weldability. Tubing connects by welding.
For technical drawings and 3-D models, click on a part number.
Short Straights
- Temperature Range: See Table
- Temper: H14 (1/2 Hard)
- Bendable: No
6" | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | ID | Max. Pressure | Temp. Range, °F | Each | |
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 1/4" | 0.035" | 0.18" | 2,940 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/16" | 0.035" | 0.243" | 1,258 psi @ 100° F | Not Rated | 00000000 | 0000 |
| 3/8" | 0.035" | 0.305" | 1,960 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 3/8" | 0.049" | 0.277" | 2,744 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 1/2" | 0.035" | 0.43" | 1,470 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 1/2" | 0.065" | 0.37" | 2,730 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 5/8" | 0.035" | 0.555" | 1,176 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 5/8" | 0.065" | 0.495" | 2,184 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 3/4" | 0.035" | 0.68" | 980 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 3/4" | 0.065" | 0.62" | 1,820 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 1" | 0.035" | 0.93" | 735 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 1" | 0.065" | 0.87" | 1,365 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 1 1/4" | 0.035" | 1.18" | 588 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 1 1/2" | 0.035" | 1.43" | 490 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 1 1/2" | 0.065" | 1.37" | 910 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 2" | 0.035" | 1.93" | 367 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 2 1/2" | 0.035" | 2.43" | 294 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 4" | 0.035" | 3.93" | 183 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
Straights
- Temperature Range: See Table
- Temper: H14 (1/2 Hard)
- Bendable: No
| OD | Wall Thick. | ID | Max. Pressure | Temp. Range, °F | Each | |
1 ft. | ||||||
|---|---|---|---|---|---|---|
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 3/16" | 0.022" | 0.144" | 490 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1/4" | 0.035" | 0.18" | 580 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 5/16" | 0.035" | 0.243" | 1,258 psi @ 100° F | Not Rated | 00000000 | 00000 |
| 3/8" | 0.035" | 0.305" | 390 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 3/8" | 0.049" | 0.277" | 2,744 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 1/2" | 0.035" | 0.43" | 290 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1/2" | 0.065" | 0.37" | 540 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/8" | 0.035" | 0.555" | 230 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/8" | 0.065" | 0.495" | 440 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/4" | 0.035" | 0.68" | 190 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/4" | 0.065" | 0.62" | 360 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1" | 0.035" | 0.93" | 140 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1" | 0.065" | 0.87" | 270 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/4" | 0.035" | 1.18" | 140 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/2" | 0.035" | 1.43" | 120 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/2" | 0.065" | 1.37" | 210 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 2" | 0.035" | 1.93" | 110 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 4" | 0.035" | 3.93" | 183 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
2 ft. | ||||||
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 1/4" | 0.035" | 0.18" | 2,940 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/16" | 0.035" | 0.243" | 1,258 psi @ 100° F | Not Rated | 00000000 | 00000 |
| 3/8" | 0.035" | 0.305" | 1,960 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/8" | 0.049" | 0.277" | 2,744 psi @ 72° F | -110° to 300° | 00000000 | 0000 |
| 1/2" | 0.035" | 0.43" | 1,470 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1/2" | 0.065" | 0.37" | 2,730 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/8" | 0.035" | 0.555" | 1,176 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/8" | 0.065" | 0.495" | 2,184 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/4" | 0.035" | 0.68" | 980 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/4" | 0.065" | 0.62" | 1,820 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1" | 0.035" | 0.93" | 735 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1" | 0.065" | 0.87" | 1,365 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/4" | 0.035" | 1.18" | 588 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/2" | 0.035" | 1.43" | 490 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/2" | 0.065" | 1.37" | 910 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 2" | 0.035" | 1.93" | 367 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 2 1/2" | 0.035" | 2.43" | 294 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 4" | 0.035" | 3.93" | 183 psi @ 72° F | -110° to 300° | 00000000 | 000000 |
3 ft. | ||||||
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 3/16" | 0.022" | 0.144" | 490 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1/4" | 0.035" | 0.18" | 580 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/8" | 0.035" | 0.305" | 390 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/8" | 0.049" | 0.277" | 2,744 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1/2" | 0.035" | 0.43" | 290 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1/2" | 0.065" | 0.37" | 540 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/8" | 0.035" | 0.555" | 230 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/8" | 0.065" | 0.495" | 440 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/4" | 0.035" | 0.68" | 190 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/4" | 0.065" | 0.62" | 360 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1" | 0.035" | 0.93" | 140 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1" | 0.065" | 0.87" | 270 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/4" | 0.035" | 1.18" | 140 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/2" | 0.035" | 1.43" | 120 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/2" | 0.065" | 1.37" | 210 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 2" | 0.035" | 1.93" | 110 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 2 1/2" | 0.035" | 2.43" | 294 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 4" | 0.035" | 3.93" | 183 psi @ 72° F | -110° to 300° | 00000000 | 000000 |
6 ft. | ||||||
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 3/16" | 0.022" | 0.144" | 490 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1/4" | 0.035" | 0.18" | 580 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/16" | 0.035" | 0.243" | 1,258 psi @ 100° F | Not Rated | 00000000 | 00000 |
| 3/8" | 0.035" | 0.305" | 390 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/8" | 0.049" | 0.277" | 2,744 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1/2" | 0.035" | 0.43" | 290 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1/2" | 0.065" | 0.37" | 540 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/8" | 0.035" | 0.555" | 230 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 5/8" | 0.065" | 0.495" | 440 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/4" | 0.035" | 0.68" | 190 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/4" | 0.065" | 0.62" | 360 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1" | 0.035" | 0.93" | 140 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1" | 0.065" | 0.87" | 270 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/4" | 0.035" | 1.18" | 140 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/2" | 0.035" | 1.43" | 120 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/2" | 0.065" | 1.37" | 210 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 2" | 0.035" | 1.93" | 110 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 2 1/2" | 0.035" | 2.43" | 294 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 4" | 0.035" | 3.93" | 183 psi @ 72° F | -110° to 300° | 00000000 | 000000 |
12 ft. | ||||||
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 1/4" | 0.035" | 0.18" | 2,940 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/8" | 0.049" | 0.277" | 2,744 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1/2" | 0.065" | 0.37" | 2,730 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 3/4" | 0.065" | 0.62" | 1,820 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1" | 0.035" | 0.93" | 735 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1" | 0.065" | 0.87" | 1,365 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/4" | 0.035" | 1.18" | 588 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
| 1 1/2" | 0.035" | 1.43" | 490 psi @ 72° F | -110° to 300° | 00000000 | 000000 |
| 1 1/2" | 0.065" | 1.37" | 910 psi @ 72° F | -110° to 300° | 00000000 | 000000 |
| 2" | 0.035" | 1.93" | 367 psi @ 72° F | -110° to 300° | 00000000 | 000000 |
| 2 1/2" | 0.035" | 2.43" | 294 psi @ 72° F | -110° to 300° | 00000000 | 000000 |
| 4" | 0.035" | 3.93" | 183 psi @ 72° F | -110° to 300° | 00000000 | 000000 |
Easy-Bend Aluminum Tubing
- Temperature Range: -40° to 180° F
- Bending Method: By Hand
- Compatible Tube Fittings: Flared
Bend this tubing into the shape you need without special tools or elbow fittings. It contains manganese for good corrosion resistance, strength, and weldability. Tubing is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting.
For technical drawings and 3-D models, click on a part number.
| OD | Wall Thick. | ID | Max. Pressure | Temper Rating | 10 ft. | 25 ft. | 50 ft. | 100 ft. | |
For Use With Air, Alcohol, Oil, Water | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 0.025" | 0.075" | 2,300 psi @ 72° F | Soft | 0000000 | ||||
| 3/16" | 0.028" | 0.132" | 1,600 psi @ 72° F | Soft | 0000000 | ||||
| 1/4" | 0.032" | 0.186" | 1,400 psi @ 72° F | Soft | 0000000 | ||||
| 1/4" | 0.049" | 0.152" | 2,300 psi @ 72° F | Soft | 0000000 | ||||
| 5/16" | 0.035" | 0.243" | 1,200 psi @ 72° F | Soft | 0000000 | ||||
| 3/8" | 0.035" | 0.305" | 1,000 psi @ 72° F | Soft | 0000000 | ||||
| 3/8" | 0.049" | 0.277" | 1,400 psi @ 72° F | Soft | 0000000 | ||||
| 7/16" | 0.035" | 0.368" | 850 psi @ 72° F | Soft | 0000000 | ||||
| 1/2" | 0.035" | 0.43" | 740 psi @ 72° F | Soft | 0000000 | ||||
| 1/2" | 0.049" | 0.402" | 1,000 psi @ 72° F | Soft | 0000000 | ||||
| 1/2" | 0.065" | 0.37" | 1,400 psi @ 72° F | Soft | 0000000 | ||||
| 5/8" | 0.035" | 0.555" | 580 psi @ 72° F | Soft | 0000000 | ||||
| 5/8" | 0.049" | 0.527" | 830 psi @ 72° F | Soft | 0000000 | ||||
Corrosion-Resistant 3003 Aluminum Tubes
- Yield Strength: 21,000 psi
- Hardness: Brinell 40 (Soft)
- Temper: H14 (1/2 Hard)
- Fabrication: Cold Drawn
- Specifications Met: ASTM B210
3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, and general sheet metal work.
For technical drawings and 3-D models, click on a part number.
1 ft. Lg. | 6 ft. Lg. | |||||
|---|---|---|---|---|---|---|
| OD | ID | Temperature Range, °F | Each | Each | ||
0.014" Wall Thick. (-0.002" to 0.002" Tolerance) | ||||||
| 5/64" | 0.050" | -300° to 300° | 0000000 | 00000 | 0000000 | 000000 |
| 7/64" | 0.081" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 9/64" | 0.113" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 11/64" | 0.144" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 13/64" | 0.175" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 15/64" | 0.207" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
0.016" Wall Thick. (-0.002" to 0.002" Tolerance) | ||||||
| 1/4" | 0.218" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 9/32" | 0.249" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 5/16" | 0.280" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 11/32" | 0.312" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 3/8" | 0.343" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 13/32" | 0.374" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 7/16" | 0.405" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 15/32" | 0.436" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 1/2" | 0.468" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 17/32" | 0.499" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 9/16" | 0.530" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
| 5/8" | 0.593" | -300° to 300° | 0000000 | 0000 | 0000000 | 00000 |
Telescoping Corrosion-Resistant 3003 Aluminum Tubes
- Yield Strength: 21,000 psi
- Hardness: Brinell 40 (Soft)
- Temper: H14 (1/2 Hard)
- Fabrication: Cold Drawn
- Specifications Met: ASTM B210
These tubes are sized so that each tube fits into the next larger size. 3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, and general sheet metal work.
For technical drawings and 3-D models, click on a part number.
1 ft. Lg. | 6 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|
| OD | ID | Temperature Range, °F | Pkg. Qty. | Pkg. | Each | ||
0.014" Wall Thick. (-0.002" to 0.002" Tolerance) | |||||||
| 1/16" | 0.035" | -300° to 300° | 3 | 0000000 | 00000 | 0000000 | 00000 |
| 3/32" | 0.066" | -300° to 300° | 3 | 0000000 | 0000 | 0000000 | 0000 |
| 1/8" | 0.097" | -300° to 300° | 3 | 0000000 | 0000 | 0000000 | 0000 |
| 5/32" | 0.128" | -300° to 300° | 1 | 0000000 | 0000 | 0000000 | 0000 |
| 3/16" | 0.159" | -300° to 300° | 1 | 0000000 | 0000 | 0000000 | 0000 |
| 7/32" | 0.191" | -300° to 300° | 1 | 0000000 | 0000 | 0000000 | 0000 |
| 1/4" | 0.222" | -300° to 300° | 1 | 0000000 | 0000 | 0000000 | 0000 |
| 9/32" | 0.253" | -300° to 300° | 1 | 0000000 | 0000 | 0000000 | 0000 |
| 5/16" | 0.284" | -300° to 300° | 1 | 0000000 | 0000 | 0000000 | 00000 |
Metal Panels
Close off openings in structures while allowing air to pass through.
For technical drawings and 3-D models, click on a part number.
Expanded Panels—Raised
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Raised panels have strands that overlap to provide a skid-resistant surface. Use them to create safety guards for equipment and machinery.
3003 aluminum is easier to form than 1100 aluminum. It's about half the weight of steel and resists corrosion in wet environments.
Opening | Strand | |||||
|---|---|---|---|---|---|---|
| Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | |
12" × 12" | ||||||
3003 Aluminum | ||||||
| 0.19" | 0.94" | 0.38" | 0.093" | 0.05" | 00000000 | 000000 |
| 0.208" | 0.94" | 0.35" | 0.096" | 0.08" | 00000000 | 00000 |
| 0.219" | 1.75" | 0.79" | 0.109" | 0.05" | 00000000 | 00000 |
| 0.369" | 1.68" | 0.67" | 0.169" | 0.125" | 00000000 | 00000 |
24" × 24" | ||||||
3003 Aluminum | ||||||
| 0.19" | 0.94" | 0.38" | 0.093" | 0.05" | 0000000 | 00000 |
| 0.208" | 0.94" | 0.35" | 0.096" | 0.08" | 0000000 | 00000 |
| 0.219" | 1.75" | 0.79" | 0.109" | 0.05" | 0000000 | 00000 |
| 0.369" | 1.68" | 0.67" | 0.169" | 0.125" | 0000000 | 00000 |
48" × 48" | ||||||
3003 Aluminum | ||||||
| 0.19" | 0.94" | 0.38" | 0.093" | 0.05" | 0000000 | 00000 |
| 0.208" | 0.94" | 0.35" | 0.096" | 0.08" | 0000000 | 000000 |
| 0.219" | 1.75" | 0.79" | 0.109" | 0.05" | 0000000 | 00000 |
| 0.369" | 1.68" | 0.67" | 0.169" | 0.125" | 0000000 | 000000 |
48" × 96" | ||||||
3003 Aluminum | ||||||
| 0.19" | 0.94" | 0.38" | 0.093" | 0.05" | 0000000 | 000000 |
| 0.208" | 0.94" | 0.35" | 0.096" | 0.08" | 0000000 | 000000 |
| 0.219" | 1.75" | 0.79" | 0.109" | 0.05" | 0000000 | 000000 |
| 0.369" | 1.68" | 0.67" | 0.169" | 0.125" | 0000000 | 000000 |
Expanded Panels—Flattened
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Flattened panels begin as raised panels, then they're rolled to a smooth and flat finish. Use them to create protective enclosures, shelving, grilles, and baskets.
3003 aluminum is easier to form than 1100 aluminum. It's about half the weight of steel and resists corrosion in wet environments.
Opening | Strand | |||||
|---|---|---|---|---|---|---|
| Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | |
12" × 12" | ||||||
3003 Aluminum | ||||||
| 0.029" | 0.31" | 0.09" | 0.06" | 0.029" | 00000000 | 000000 |
| 0.038" | 1" | 0.29" | 0.104" | 0.038" | 00000000 | 00000 |
| 0.038" | 1.81" | 0.68" | 0.122" | 0.038" | 00000000 | 00000 |
| 0.06" | 1" | 0.29" | 0.105" | 0.06" | 00000000 | 00000 |
| 0.06" | 1.75" | 0.64" | 0.143" | 0.06" | 00000000 | 00000 |
| 0.094" | 1.75" | 0.55" | 0.187" | 0.094" | 00000000 | 00000 |
| 0.094" | 2.75" | 0.97" | 0.181" | 0.094" | 00000000 | 00000 |
24" × 24" | ||||||
3003 Aluminum | ||||||
| 0.029" | 0.31" | 0.09" | 0.06" | 0.029" | 0000000 | 00000 |
| 0.038" | 1" | 0.29" | 0.104" | 0.038" | 0000000 | 00000 |
| 0.038" | 1.81" | 0.68" | 0.122" | 0.038" | 0000000 | 00000 |
| 0.06" | 1" | 0.29" | 0.105" | 0.06" | 0000000 | 00000 |
| 0.06" | 1.75" | 0.64" | 0.143" | 0.06" | 0000000 | 00000 |
| 0.094" | 1.75" | 0.55" | 0.187" | 0.094" | 0000000 | 00000 |
| 0.094" | 2.75" | 0.97" | 0.181" | 0.094" | 0000000 | 00000 |
48" × 48" | ||||||
3003 Aluminum | ||||||
| 0.029" | 0.31" | 0.09" | 0.06" | 0.029" | 0000000 | 000000 |
| 0.038" | 1" | 0.29" | 0.104" | 0.038" | 0000000 | 000000 |
| 0.038" | 1.81" | 0.68" | 0.122" | 0.038" | 0000000 | 00000 |
| 0.06" | 1" | 0.29" | 0.105" | 0.06" | 0000000 | 000000 |
| 0.06" | 1.75" | 0.64" | 0.143" | 0.06" | 0000000 | 000000 |
| 0.094" | 1.75" | 0.55" | 0.187" | 0.094" | 0000000 | 000000 |
| 0.094" | 2.75" | 0.97" | 0.181" | 0.094" | 0000000 | 000000 |
48" × 96" | ||||||
3003 Aluminum | ||||||
| 0.029" | 0.31" | 0.09" | 0.06" | 0.029" | 0000000 | 000000 |
| 0.038" | 1" | 0.29" | 0.104" | 0.038" | 0000000 | 000000 |
| 0.038" | 1.81" | 0.68" | 0.122" | 0.038" | 0000000 | 000000 |
| 0.06" | 1" | 0.29" | 0.105" | 0.06" | 0000000 | 000000 |
| 0.06" | 1.75" | 0.64" | 0.143" | 0.06" | 0000000 | 000000 |
| 0.094" | 1.75" | 0.55" | 0.187" | 0.094" | 0000000 | 000000 |
| 0.094" | 2.75" | 0.97" | 0.181" | 0.094" | 0000000 | 000000 |
Perforated Panels
Circle
Diamond
Weave
Oval
Perforated panels are for use in decorative applications. They can be cut, formed, and welded.
3003 aluminum is easier to form than 1100 aluminum. It's about half the weight of steel and resists corrosion in wet environments.
Overall | Opening | |||||||
|---|---|---|---|---|---|---|---|---|
| Opening Pattern | Thick. | Wd. Tolerance | Lg. Tolerance | Wd. | Lg. | Open Area | Each | |
36" × 40" | ||||||||
3003 Aluminum  | ||||||||
| Circle | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 44% | 0000000 | 0000000 |
| Diamond | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.5" | 64% | 0000000 | 000000 |
| Oval | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.75" | 66% | 0000000 | 00000 |
| Weave | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 53% | 0000000 | 00000 |
36" × 60" | ||||||||
3003 Aluminum | ||||||||
| Circle | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 44% | 0000000 | 000000 |
| Diamond | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.5" | 64% | 0000000 | 000000 |
| Oval | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.75" | 66% | 0000000 | 000000 |
| Weave | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 53% | 0000000 | 000000 |