Transfer harsh chemicals while reducing vibration that could damage pumps or other equipment. This hose is made of corrugated stainless steel and reinforced by a stainless steel braid, so it absorbs vibration instead of passing it on. Also known as a pump connector, it comes in lengths that are commonly attached to pumps. The PTFE liner resists cracking or weakening from some of the most corrosive chemicals, including sulfuric and hydrochloric acid. There’s no need for a gasket because the liner flares out as it passes through the flanges, keeping your line’s contents from touching the fittings. For easy bolt alignment, the flanged ends swivel.

Blended with Buna-N, this hose remains flexible and won’t break down from oily or fatty food and beverages. It also withstands high temperatures and chemicals, so you can clean it often. The interior is smooth to prevent product buildup inside the hose. This hose is FDA compliant and 3-A certified, so you know it’s safe for use with food. Reinforced with yarn and steel wire, it holds its shape and won’t collapse when hooked up to a vacuum pump.

For technical drawings and 3-D models, click on a part number.

Move flour, grain, rice, sugar, and other dry food through your line. This hose meets strict FDA standards for food safety or 3-A standards for a sanitary design. Made of PVC, it won’t impart odors or tastes on the food. A smooth interior prevents the food from getting caught or building up inside this hose. It's also clear, so you can monitor the food as it passes through the hose. This hose is sturdy enough to be used as part of vacuum system—it won’t collapse when hooked up to a vacuum pump. The spiral reinforcement on the outside increases the hose's flexibility.

Transfer flour, grain, rice, sugar, and other dry food through lines connected by cam-and-groove fittings. This hose meets strict FDA standards for food safety and 3-A standards for a sanitary design. Made of PVC, it won’t impart tastes or odors on food products. Its interior is smooth, so food won't get caught or build up inside the hose. When vacuum is applied, this hose holds its shape and won't collapse. The spiral reinforcement on the outside increases its flexibility. To connect fittings, insert the plug into the socket and push the levers down.

Rated for low-pressure applications up to 500 psi, this hose works well as a return line in your hydraulic system.

For technical drawings and 3-D models, click on a part number.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products. It is reinforced with a steel wire that provides an escape route for electrostatic buildup when used in a grounded system. It is not for use on a reel. Fittings that swivel until tightened are easy to install.

For technical drawings and 3-D models, click on a part number.

Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures. Hose is for use with smoke, water-based paint fumes, and welding fumes.

Neoprene-coated hose meets UL 94 HB and UL 94 V-0 for flame retardance and can also handle sparks.

Silicone-coated hose handles a wider temperature range than neoprene-coated hose.

Warning: Hose should not be used for applications that generate a static charge.

For technical drawings and 3-D models, click on a part number.

Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over. Use to vent carbon monoxide exhaust fumes while engine idling. Hose is also for use with smoke and water-based paint fumes.

2" to 4" ID hose has one end that is slightly larger than the other end. To make longer lengths, screw the smaller end of one hose into the larger end of another hose of the same size. When your application requires frequent movement or pulling, use a straight connector.

For technical drawings and 3-D models, click on a part number.

Tough, resilient EVA plastic offers excellent impact resistance and is long lasting. Hose has a smooth interior for unrestricted flow.

Warning: Hose should not be used for applications that generate a static charge.

For technical drawings and 3-D models, click on a part number.