Turcite Rounds | McMaster-Carr

Filter by

Shape

System of Measurement

Diameter

Color

Length

Material

Comparable To

Performance

Highly Electrical Insulating

For Use With

Acetic Acid (White Vinegar)

Methyl Ethyl Ketone (MEK)

Mineral Oil

Sodium Hydroxide (Caustic Soda)

Tensile Strength

7,690 psi to 8,100 psi

7,700 psi

10,000 psi to 11,000 psi

Maximum Temperature

Tolerance Rating

Filler Material

Hardness

Rockwell R115 to Rockwell R118

Rockwell R120 to Rockwell R122

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Density

Dielectric Strength

400 V/mil to 500 V/mil

450 V/mil

450 V/mil to 500 V/mil

Water Absorption

Impact Strength

0.7 ft·lbf/in to 1 ft·lbf/in

0.9 ft·lbf/in

1 ft·lbf/in to 1.5 ft·lbf/in

Minimum Temperature

Help me decide (beta)

303 Products

About Plastic

Compare over 25 types of plastic to find the right material for you.

Performance

High Strength

Our strongest plastic, with a tensile strength of 5,000 psi or higher

274 products

Machinable

Cut the smoothest finishes in the fastest time

274 products

Performance

Low Friction

Prevent parts from scraping, slowing down, or overheating due to friction

267 products

Thermally Stable

Won't expand as temperatures rise

274 products

Ultra-Low-Friction Acetal Rods

A silicone additive gives these rods a self-lubricating surface that reduces friction and extends the life of your parts.

Blue—Blue is also known as Turcite A; it is stronger than red, making it a good choice for heavier loads at moderate speeds.

Red—Red is also known as Turcite X; it is more slippery than blue, making it suitable for low-load applications at high speeds.

	Fabrication	Min. Temp., ° F	Max. Temp., ° F	Flammability Rating	Choose a Length, ft.		Per Ft.
Blue



	1/4"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T11	000000


	3/8"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T12	00000
	1/2"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T13	00000
	5/8"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T14	00000
	3/4"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T15	00000
	1"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T16	00000
	1 1/4"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T17	00000
	1 1/2"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T18	00000
	1 3/4"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T21	000000
	2"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T22	000000
	2 1/2"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4	7521T23	000000


	3"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4	7521T24	000000
	3 1/2"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4	7521T25	000000


	Red



			1/4"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T31	00000


			3/8"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T32	00000
			1/2"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T33	00000
			5/8"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T34	00000
			3/4"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T35	00000
			1"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T36	00000
			1 1/4"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T37	00000
			1 1/2"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T38	000000
			1 3/4"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T41	000000
			2"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4, 5, 6, 7, 8	7521T42	000000
			2 1/2"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4	7521T43	000000


			3"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4	7521T44	000000
			3 1/2"	Extruded	-50	180	UL 94 HB	1, 2, 3, 4	7521T45	000000

Ultra-Low-Friction Delrin® Acetal Rods

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. These rods machine cleanly to tight tolerances for precise, accurate parts. They’re stronger and stiffer than acetal copolymer, making them the better choice for higher loads or physical stress. Use them for gears, bushings, bearings, or shafts. Delrin® acetal resin is also known as acetal homopolymer and POM-H.

Long Rods

Image of Product. Front orientation. Plastic. Ultra-Low-Friction Delrin® Acetal Rods.

	Fabrication	Min. Temp., ° F	Max. Temp., ° F	Flammability Rating	Choose a Length, ft.		Per Ft.
Brown



	1/4"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8579K12	00000


	3/8"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8579K14	0000
	1/2"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8579K16	00000
	5/8"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8579K24	00000
	3/4"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8579K26	00000
	1"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8579K28	00000
	1 1/8"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4	8579K32	00000
	1 1/4"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8579K34	00000
	1 1/2"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8579K36	00000
	1 3/4"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4	8579K38	000000
	2"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8579K42	000000


	2 1/4"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4	8579K46	000000
	2 1/2"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4	8579K48	000000
	3"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4	8579K52	000000
	3 1/2"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4	8579K54	000000
	4"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4	8579K56	000000
	5"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4	8579K58	00000000

Short Rods and Discs

					1/2" Long		1" Long		3" Long		6" Long
	Dia.	Fabrication	Temp., ° F	Flammability Rating		Each		Each		Each		Each
Brown



		3"	Extruded	-40 to 185	UL 94 HB	9969K11	000000	9969K12	000000	9969K14	000000	9969K16	0000000


		4"	Extruded	-40 to 185	UL 94 HB	9969K21	00000	9969K22	000000	9969K24	000000	9969K26	000000
		6"	Extruded	-40 to 185	UL 94 HB	———	0	———	0	9969K34	000000	9969K36	000000

Ultra-Machinable Delrin® Acetal Rods

Because these naturally slippery, wear-resistant rods and discs resist expanding when exposed to heat and moisture, they can be easily machined to close tolerances. They are a good choice for parts that require precision, such as gears, bushings, and bearings. Delrin® acetal resin is also known as acetal homopolymer; it is stronger and stiffer than acetal copolymer.

Long Rods

Image of Product. Front orientation. Plastic. Ultra-Machinable Delrin® Acetal Rods.

	Dia.	Fabrication	Min. Temp., ° F	Max. Temp., ° F	Food Industry Std.	Choose a Length, ft.		Per Ft.
Black



		3/16"	Extruded	-20	180	—	5	8576K491	00000


		1/4"	Extruded	-20	180	—	5	8576K111	0000
		5/16"	Extruded	-20	180	—	5	8576K121	0000
		3/8"	Extruded	-20	180	—	5	8576K131	0000
		7/16"	Extruded	-20	180	—	5	8576K141	0000
		1/2"	Extruded	-20	180	—	5	8576K158	0000
		9/16"	Extruded	-20	180	—	5	8576K166	0000
		5/8"	Extruded	-20	180	—	5	8576K171	0000
		3/4"	Extruded	-20	180	—	5	8576K188	0000
		7/8"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K19	0000
		1"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K21	0000


		1 1/8"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K22	0000
		1 1/4"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K23	00000
		1 3/8"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K24	00000
		1 1/2"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K25	00000
		1 5/8"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K26	00000
		1 3/4"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K27	00000
		1 7/8"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K51	00000
		2"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K29	00000
		2 1/4"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K31	00000
		2 1/2"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K32	00000


		2 3/4"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K52	00000
		3"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K34	00000
		3 1/4"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K53	00000
		3 1/2"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K35	00000
		4"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K36	000000
		4 1/2"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K81	000000
		5"	Extruded	-20	180	—	1, 2, 3, 4, 5	8576K38	000000
		5 1/2"	Extruded	-20	180	—	1	8576K861	000000
		6"	Extruded	-20	180	—	1	8576K416	000000
		6 1/2"	Extruded	-20	180	—	1	8576K871	000000


		7"	Extruded	-20	180	—	1	8576K881	000000
		7 1/2"	Extruded	-20	180	—	1	8576K841	000000
		8"	Extruded	-20	180	—	1	8576K851	000000


		White



				3/16"	Extruded	-20	180	FDA Standard	5	8572K491	0000


				1/4"	Extruded	-20	180	FDA Standard	5	8572K518	0000
				5/16"	Extruded	-20	180	FDA Standard	5	8572K521	0000
				3/8"	Extruded	-20	180	FDA Standard	5	8572K538	0000
				7/16"	Extruded	-20	180	FDA Standard	5	8572K541	0000
				1/2"	Extruded	-20	180	FDA Standard	5	8572K558	0000
				9/16"	Extruded	-20	180	FDA Standard	5	8572K561	0000
				5/8"	Extruded	-20	180	FDA Standard	5	8572K571	0000
				3/4"	Extruded	-20	180	FDA Standard	5	8572K588	0000
				7/8"	Extruded	-20	180	FDA Standard	1, 2, 3, 4, 5	8572K59	0000
				1"	Extruded	-20	180	FDA Standard	1, 2, 3, 4, 5	8572K61	0000


1 1/8"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K22	00000
1 1/4"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K23	00000
1 3/8"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K24	00000
1 1/2"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K25	00000
1 5/8"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K26	00000
1 3/4"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K27	00000
1 7/8"	Extruded			-20	180	FDA Standard, NSF Standard	1, 2, 3, 4, 5	8572K71	00000
2"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K29	00000
2 1/4"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K31	00000
2 1/2"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K32	00000


2 3/4"	Extruded			-20	180	FDA Standard, NSF Standard	1, 2, 3, 4, 5	8572K72	00000
3"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K34	00000
3 1/4"	Extruded			-20	180	FDA Standard, NSF Standard	1, 2, 3, 4, 5	8572K73	00000
3 1/2"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K35	000000
4"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K36	000000
4 1/2"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K37	000000
5"	Extruded			-20	180	FDA Standard	1, 2, 3, 4, 5	8572K38	000000
5 1/2"	Extruded			-20	180	FDA Standard, NSF Standard	1	8572K741	000000
6"	Extruded			-20	180	FDA Standard, NSF Standard	1	8572K751	000000
6 1/2"	Extruded			-20	180	FDA Standard, NSF Standard	1	8572K761	000000


7"	Extruded			-20	180	FDA Standard, NSF Standard	1	8572K771	000000
7 1/2"	Extruded			-20	180	FDA Standard, NSF Standard	1	8572K781	000000
8"	Extruded			-20	180	FDA Standard, NSF Standard	1	8572K791	000000

Short Rods and Discs

					1/2" Long		1" Long		2" Long		3" Long		4" Long		6" Long
	Dia.	Fabrication	Temp., ° F	Food Industry Std.		Each		Each		Each		Each		Each		Each
Black



		3"	Extruded	-20 to 180	—	9986K11	00000	9986K12	000000	9986K13	000000	9986K14	000000	9986K15	000000	9986K16	000000


		4"	Extruded	-20 to 180	—	9986K21	00000	9986K22	00000	9986K23	00000	9986K24	00000	9986K25	00000	9986K26	00000
		5"	Extruded	-20 to 180	—	9986K51	00000	9986K52	00000	9986K53	00000	9986K54	000000	9986K56	000000	9986K55	000000
		6"	Extruded	-20 to 180	—	9986K31	00000	9986K32	00000	9986K33	000000	9986K34	000000	9986K35	000000	9986K36	000000
		7"	Extruded	-20 to 180	—	9986K71	00000	9986K72	00000	9986K74	000000	9986K76	000000	9986K77	000000	9986K79	000000
		8"	Extruded	-20 to 180	—	9986K41	00000	9986K42	000000	9986K43	000000	9986K44	000000	9986K45	000000	9986K46	000000
		10"	Extruded	-20 to 180	—	9986K81	000000	9986K82	000000	9986K84	000000	———	0	———	0	———	0


		White



				3"	Extruded	-20 to 180	FDA Standard, NSF Standard	8582K11	0000	8582K12	00000	8582K14	00000	8582K15	00000	8582K16	00000	8582K18	00000


				4"	Extruded	-20 to 180	FDA Standard, NSF Standard	8582K21	00000	8582K22	00000	8582K24	00000	8582K25	00000	8582K26	00000	8582K28	00000
				5"	Extruded	-20 to 180	FDA Standard, NSF Standard	8582K31	00000	8582K32	00000	8582K34	00000	8582K36	00000	8582K81	000000	8582K39	000000
				6"	Extruded	-20 to 180	FDA Standard, NSF Standard	8582K41	00000	8582K42	00000	8582K44	000000	8582K45	000000	8582K46	000000	8582K48	000000
				7"	Extruded	-20 to 180	FDA Standard, NSF Standard	8582K51	00000	8582K52	00000	8582K54	000000	8582K56	000000	8582K82	000000	8582K59	000000
				8"	Extruded	-20 to 180	FDA Standard, NSF Standard	8582K61	00000	8582K62	00000	8582K64	000000	8582K65	000000	8582K66	000000	8582K68	000000
				10"	Extruded	-20 to 180	FDA Standard, NSF Standard	8582K71	000000	8582K72	000000	8582K74	000000	———	0	———	0	———	0

Ultra-Machinable Delrin® Acetal Round Tubes

Easy to machine to close tolerances, these dimensionally stable tubes resist expanding when exposed to heat and moisture. They have a naturally slippery surface along with excellent wear resistance. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Oversized Tolerance—Oversized tubes have an oversized OD and an undersized ID for finishing to the sizes listed.

							Black		White
	OD	ID	Fabrication	Temp., ° F	Food Industry Std.	Choose a Length, ft.		Per Ft.		Per Ft.
Oversized Tolerance







				1/16" Thick Wall

				1/4"	1/8"	Extruded	-20 to 180	FDA Standard, NSF Standard	3, 5	1830T119	00000	8627K519	00000


				5/8"	1/2"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T149	0000	8627K579	0000




						1/8" Thick Wall

						1/2"	1/4"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T129	0000	8627K539	0000


						3/4"	1/2"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T159	0000	8627K599	0000
						7/8"	5/8"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T179	0000	8627K639	0000
						1 1/4"	1"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T219	0000	8627K699	0000
						1 1/2"	1 1/4"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T239	00000	8627K759	00000
						1 3/4"	1 1/2"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T259	00000	8627K829	00000
						2"	1 3/4"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T279	00000	8627K899	00000
						2 1/4"	2"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T289	00000	8627K919	00000




								3/16" Thick Wall

								5/8"	1/4"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T139	0000	8627K559	0000




										1/4" Thick Wall

										3/4"	1/4"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T169	0000	8627K619	0000


										1"	1/2"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T189	0000	8627K629	0000
										1 1/4"	3/4"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T199	00000	8627K659	00000
										1 1/2"	1"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T229	00000	8627K739	00000
										1 3/4"	1 1/4"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T249	00000	8627K789	00000
										2"	1 1/2"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T269	00000	8627K889	00000
										2 1/2"	2"	Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	1830T299	00000	8627K929	00000


										Tight Tolerance (-0.01" to 0.01")







														1/32" Thick Wall

														1/8"	1/16"	Extruded	-20 to 180	FDA Standard, NSF Standard	3, 5	———	0	8627K119	0000


3/16"	1/8"													Extruded	-20 to 180	FDA Standard, NSF Standard	3, 5	———	0	8627K129	0000




		1/16" Thick Wall

		1/4"	1/8"											Extruded	-20 to 180	FDA Standard, NSF Standard	3, 5	———	0	8627K139	0000


		3/8"	1/4"											Extruded	-20 to 180	FDA Standard, NSF Standard	3, 5	———	0	8627K149	0000
		1/2"	3/8"											Extruded	-20 to 180	FDA Standard, NSF Standard	3, 5	———	0	8627K159	0000
		5/8"	1/2"											Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	———	0	8627K169	0000
		3/4"	5/8"											Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	———	0	8627K189	0000
		7/8"	3/4"	Extruded										-20 to 180	FDA Standard, NSF Standard	1, 3, 5	———	0	8627K219	0000




				1/8" Thick Wall

				5/8"	3/8"									Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	———	0	8627K179	0000


				3/4"	1/2"									Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	———	0	8627K199	0000
				7/8"	5/8"									Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	———	0	8627K229	0000
				1"	3/4"									Extruded	-20 to 180	FDA Standard, NSF Standard	1, 3, 5	———	0	8627K239	0000

Ultra-Low-Friction Delrin® Acetal Round Tubes

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. These tubes resist expanding when exposed to heat and moisture, so they can be machined to tight tolerances. Fabricate them into pump components, gears, and bearings. Delrin® acetal resin is also known as acetal homopolymer and POM-H.

Oversized Tolerance—Oversized tubes have an oversized OD and an undersized ID for finishing to the sizes listed.

							Brown
	OD	ID	Fabrication	Temp., ° F	Flammability Rating	Choose a Length, ft.		Per Ft.
Oversized Tolerance







				1/16" Thick Wall

				1/4"	1/8"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T11	00000


				5/8"	1/2"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T14	00000




						1/8" Thick Wall

						1/2"	1/4"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T12	00000


						3/4"	1/2"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T15	00000
						1 1/4"	1"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T22	00000




								3/16" Thick Wall

								5/8"	1/4"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T13	00000




										1/4" Thick Wall

										3/4"	1/4"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T16	00000


										1"	1/2"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T17	00000
										1 1/4"	3/4"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T21	00000
										1 1/2"	1"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T23	00000
										2"	1 1/2"	Extruded	-40 to 185	UL 94 HB	1, 2, 3, 4, 5	1817T24	00000

Telescoping Delrin® Acetal Round Tubes

Telescoping tubes, also known as bushing stock, slide over rods and inside shafts to increase or decrease the diameter. Their precise sizing also allows ascending sizes to fit inside each other to increase the wall thickness.

Easy to machine to tight tolerances, these dimensionally stable tubes resist expanding when exposed to heat and moisture. They have a naturally slippery surface along with excellent wear resistance. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer and POM-H, is stronger and stiffer than acetal copolymer.

							White
	OD	ID	Fabrication	Temp., ° F	Lg.	Food Industry Std.		Each
Tight Tolerance (-0.005" to 0.005")







				1/8" Thick Wall

				1/2"	1/4"	Extruded	0 to 180	6"	FDA Standard, NSF Standard	1989T11	000000


				3/4"	1/2"	Extruded	0 to 180	6"	FDA Standard, NSF Standard	1989T12	00000
				1"	3/4"	Extruded	0 to 180	6"	FDA Standard, NSF Standard	1989T13	00000
				1 1/4"	1"	Extruded	0 to 180	6"	FDA Standard, NSF Standard	1989T14	00000
				1 1/2"	1 1/4"	Extruded	0 to 180	6"	FDA Standard, NSF Standard	1989T15	000000
				1 3/4"	1 1/2"	Extruded	0 to 180	6"	FDA Standard, NSF Standard	1989T16	000000
				2"	1 3/4"	Extruded	0 to 180	6"	FDA Standard, NSF Standard	1989T17	000000
				2 1/4"	2"	Extruded	0 to 180	6"	FDA Standard, NSF Standard	1989T18	000000
				2 1/2"	2 1/4"	Extruded	0 to 180	6"	FDA Standard, NSF Standard	1989T19	000000

Plastic Balls

Delrin® Acetal—Able to hold tight tolerances, these balls resist expanding when exposed to heat and moisture. They have a naturally slippery, wear-resistant surface. Use them for bearings and low-load rolling applications. Delrin® acetal resin is also known as acetal homopolymer.

	Max. Temp., ° F	Color	Food Industry Std.	Pkg. Qty.		Pkg.
Multipurpose







	Delrin® Acetal

	1/16"	-0.001" to 0.001"	-20	180	White	FDA Standard	100	9614K5	00000


	3/32"	-0.001" to 0.001"	-20	180	White	FDA Standard	100	9614K51	0000
	1/8"	-0.001" to 0.001"	-20	180	White	FDA Standard	100	9614K52	0000
	9/64"	-0.001" to 0.001"	-20	180	White	FDA Standard	100	9614K61	0000
	5/32"	-0.001" to 0.001"	-20	180	White	FDA Standard	100	9614K53	0000
	3/16"	-0.001" to 0.001"	-20	180	White	FDA Standard	100	9614K54	0000
	7/32"	-0.001" to 0.001"	-20	180	White	FDA Standard	100	9614K22	0000
	1/4"	-0.001" to 0.001"	-20	180	White	FDA Standard	100	9614K24	0000
	9/32"	-0.001" to 0.001"	-20	180	White	FDA Standard	25	9614K92	0000
	5/16"	-0.001" to 0.001"	-20	180	White	FDA Standard	100	9614K57	0000
	3/8"	-0.001" to 0.001"	-20	180	White	FDA Standard	100	9614K58	00000


	7/16"	-0.001" to 0.001"	-20	180	White	FDA Standard	50	9614K93	00000
	1/2"	-0.001" to 0.001"	-20	180	White	FDA Standard	50	9614K59	00000
	9/16"	-0.001" to 0.001"	-20	180	White	FDA Standard	25	9614K94	0000
	5/8"	-0.001" to 0.001"	-20	180	White	FDA Standard	25	9614K6	00000
	3/4"	-0.001" to 0.001"	-20	180	White	FDA Standard	10	9614K25	0000
	13/16"	-0.001" to 0.001"	-20	180	White	FDA Standard	1	9614K62	0000
	7/8"	-0.001" to 0.001"	-20	180	White	FDA Standard	10	9614K95	00000
	15/16"	-0.001" to 0.001"	-20	180	White	FDA Standard	1	9614K63	0000
	1"	-0.001" to 0.001"	-20	180	White	FDA Standard	10	9614K27	00000
	1 1/8"	-0.002" to 0.002"	-20	180	White	FDA Standard	1	9614K64	0000


	1 1/4"	-0.002" to 0.002"	-20	180	White	FDA Standard	1	9614K65	0000
	1 1/2"	-0.002" to 0.002"	-20	180	White	FDA Standard	1	9614K39	0000
	2"	-0.002" to 0.002"	-20	180	White	FDA Standard	1	9614K66	00000
	2 mm	-0.0254 mm to 0.0254 mm	-20	180	White	FDA Standard	100	9614K71	0000
	3.5 mm	-0.0254 mm to 0.0254 mm	-20	180	White	FDA Standard	100	9614K67	0000
	4 mm	-0.0254 mm to 0.0254 mm	-20	180	White	FDA Standard	100	9614K73	0000
	5 mm	-0.0254 mm to 0.0254 mm	-20	180	White	FDA Standard	100	9614K74	0000
	8 mm	-0.0254 mm to 0.0254 mm	-20	180	White	FDA Standard	50	9614K68	0000

Glass-Filled Delrin® Acetal Rods

A glass-fiber filler makes these naturally slippery, wear-resistant rods more rigid than standard Delrin® acetal resin rods. They can be machined to tight tolerances because they resist expanding when exposed to heat and moisture. Use these rods to machine gears, bearings, or shafts. Delrin® acetal resin is also known as acetal homopolymer and POM-H.

	Fabrication	Min. Temp., ° F	Max. Temp., ° F	Flammability Rating	Choose a Length, ft.		Per Ft.
White



	3/8"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8719K11	00000


	1/2"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8719K12	00000
	3/4"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8719K13	00000
	1"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8719K14	00000
	1 1/4"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8719K15	00000
	1 1/2"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8719K16	00000
	2"	Extruded	-40	185	UL 94 HB	1, 2, 3, 4, 5	8719K17	000000