About Draw Latches
More
Tight-Hold Turn-to-Open Draw Latches
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment. Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.
Mortise-mount latches are recessed to create a nearly flat surface that protects the latch from damage.
For technical drawings and 3-D models, click on a part number.
Overall | For Cutout | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Ht. | Wd. | Dp. | Fasteners Included | Screw Size  | Each | |
Surface Mount | |||||||||||||
| Zinc-Plated Steel | Dull | 3/4" | 2 3/8" | 1 15/16" | 5/8" | 300 | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
| Zinc-Plated Steel | Dull | 3/4" | 2 3/4" | 2 1/2" | 13/16" | 400 | __ | __ | __ | No | No. 8 | 0000000 | 00000 |
| Zinc-Plated Steel | Dull | 1 7/8" | 4 15/16" | 3 1/4" | 13/16" | 500 | __ | __ | __ | No | No. 10 | 0000000 | 00000 |
| Black Powder-Coated Steel | Dull | 1 1/4" | 2 7/8" | 2 1/16" | 3/4" | 270 | __ | __ | __ | No | No. 8 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 3/4" | 2 3/8" | 1 15/16" | 5/8" | 300 | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 1 1/4" | 2 7/8" | 2 1/16" | 3/4" | 190 | __ | __ | __ | No | No. 8 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 1 7/8" | 4 15/16" | 3 1/4" | 13/16" | 500 | __ | __ | __ | No | No. 10 | 0000000 | 00000 |
Mortise Mount | |||||||||||||
| Zinc-Plated Steel | Dull | 1/2" | 4 1/8" | 4" | 1/16" | Not Rated | 3 1/8" | 3" | 9/16" | No | No. 10 | 00000000 | 00000 |
| Zinc-Plated Steel | Dull | 1 1/16" | 6 1/4" | 5" | 1/16" | Not Rated | 5" | 3 13/16" | 9/16" | No | No. 10 | 00000000 | 00000 |
Turn-to-Open Draw Latches
Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.
Zinc-plated steel latches are mildly corrosion resistant.
Black powder-coated steel latches blend into dark backgrounds and offer some corrosion resistance.
300 series stainless steel latches have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Each | |
Zinc-Plated Steel | |||||||||
| Dull | 1/4" | 2 5/16" | 1 1/2" | 5/8" | 300 | No | No. 4 | 0000000 | 00000 |
| Dull | 1/4" | 2 15/16" | 1 1/2" | 9/16" | 190 | No | No. 4 | 0000000 | 00000 |
| Dull | 3/8" | 4 9/16" | 2 3/4" | 11/16" | 500 | No | No. 10 | 0000000 | 00000 |
| Dull | 3/8" | 4 11/16" | 3 1/4" | 9/16" | 800 | No | No. 10 | 0000000 | 00000 |
| Dull | 3/8" | 4 3/4" | 2 3/4" | 13/16" | Not Rated | No | No. 10 | 0000000 | 00000 |
| Dull | 3/4" | 2 3/4" | 2 3/16" | 13/16" | 400 | No | No. 8 | 0000000 | 00000 |
Black Powder-Coated Steel | |||||||||
| Dull | 1/2" | 2 5/8" | 2 1/16" | 11/16" | 190 | No | No. 8 | 0000000 | 00000 |
300 Series Stainless Steel | |||||||||
| Dull | 1/4" | 2 5/16" | 1 1/2" | 5/8" | 300 | No | No. 4 | 0000000 | 00000 |
| Dull | 1/4" | 2 15/16" | 1 1/2" | 9/16" | 270 | No | No. 4 | 0000000 | 00000 |
| Dull | 3/8" | 4 9/16" | 2 3/4" | 11/16" | 500 | No | No. 10 | 0000000 | 00000 |
| Dull | 1/2" | 2 5/8" | 2 1/16" | 11/16" | 270 | No | No. 8 | 0000000 | 00000 |
L-Handle Light Duty Turn-to-Open Draw Latches
Use this L-handle latch to draw lightweight surfaces together.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity | Mounting Fasteners Included | Each | |
| Brass-Plated Steel | Dull | 3/16" | 2 5/8" | 2 5/16" | 7/8" | Not Rated | Yes | 0000000 | 00000 |
Light Duty Turn-to-Open Draw Latches
Use this latch to draw lightweight surfaces together.
For technical drawings and 3-D models, click on a part number.
| Material | Appearance | Latching Distance | Dia. | Projection | Capacity | Mounting Fasteners Included | Each | |
| Zinc-Plated Steel | Dull | 15/16" | 1 7/8" | 5/8" | Not Rated | Yes | 0000000 | 00000 |
Turn-to-Open Padlockable Draw Latches
Lift and turn the handle 180° to open and close these latches. Capacity is the maximum amount of force the latch can withstand.
Mortise-mount latch is recessed to create a nearly flat surface that protects the latch from damage. It also has a spring-loaded handle that provides a tight hold and compensates for slight misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | For Cutout | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | For Max. Padlock Shackle Dia. | Ht. | Wd. | Dp. | Fasteners Included | Screw Size | Each | |
Surface Mount | ||||||||||||||
| Zinc-Plated Steel | Dull | 3/4" | 2 9/16" | 1 1/2" | 15/16" | 300 | 3/8" | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
| 300 Series Stainless Steel | Dull | 3/4" | 2 9/16" | 1 1/2" | 15/16" | 300 | 3/8" | __ | __ | __ | No | No. 4 | 0000000 | 00000 |
Mortise Mount | ||||||||||||||
| Zinc-Plated Steel | Dull | 1 1/16" | 6 1/4" | 5" | 1/16" | Not Rated | 3/8" | 5 1/8" | 3 13/16" | 9/16" | No | No. 10 | 00000000 | 00000 |
Turn-to-Open Keyed Draw Locks
Lift and turn the handle 180° to open and close this lock. It has a spring-loaded handle that provides a tight hold and compensates for slight misalignment. It's keyed alike, choose it if you need several locks that open with the same key. Capacity is the maximum amount of force the latch can withstand.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Key Number | Number of Keys Included | Each | |
| Zinc-Plated Steel | Dull | 3/4" | 3 1/2" | 2 1/2" | 13/16" | 400 | No | No. 8 | 801 | 2 | 0000000 | 000000 |
Plastic Turn Latches
Twist these latches to hold small lightweight doors and panels closed. They turn 360°.
For technical drawings and 3-D models, click on a part number.
Screw-On Turn Latches
Hold doors, drawers, and hatches closed with the turn of a handle. These latches turn 360° in 90° increments.
For technical drawings and 3-D models, click on a part number.
Mounting Plate | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Projection | Ht. | Wd. | Color | Mounting Fasteners Included | Number of Mounting Holes | Mounting Hole Dia. | Mounting Hole Style | Mounting Screw Size | Each | |
Black Arm | |||||||||||
Powder-Coated Zinc | |||||||||||
| 1 9/16" | 15/16" | 1 3/4" | 13/16" | Black | No | 2 | 7/32" | Countersunk | M5 | 0000000 | 000000 |
| 2 1/8" | 15/16" | 1 3/4" | 13/16" | Black | No | 2 | 7/32" | Countersunk | M5 | 0000000 | 00000 |
Red Arm | |||||||||||
Powder-Coated Zinc | |||||||||||
| 1 9/16" | 15/16" | 1 3/4" | 13/16" | Black | No | 2 | 7/32" | Countersunk | M5 | 0000000 | 00000 |
| 2 1/8" | 15/16" | 1 3/4" | 13/16" | Black | No | 2 | 7/32" | Countersunk | M5 | 0000000 | 00000 |
Stud-Mount Turn Latches
Hold doors, drawers, and hatches closed with the turn of a handle. These latches turn 90°. Select the latching position when mounting.
For technical drawings and 3-D models, click on a part number.
Heavy Duty Padlockable Swinging Bar Latches
In addition to being padlockable, this heavy duty latch comes with two handles for access from the inside as well as the outside. It's often used on refrigerators and truck doors. It is reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Rod | Arm Mounting Plate | Strike Plate | Mounting | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Projection | For Min. Door Thick. | Dia. | Lg. | Thread Lg. | For Max. Padlock Shackle Dia. | Lg. | Ht. | Lg. | Ht. | Fasteners Included | Screw Size | No. of | Dia. | Style | Each | |
Through-Hole Mount | |||||||||||||||||
Zinc-Plated Iron—Dull (Zinc Handle) | |||||||||||||||||
| 7 1/4" | 2 1/8" | 2" | 9/16" | 8 3/4" | 7" | 3/8" | 1 1/2" | 2 1/4" | 7/8" | 7 3/8" | No | No. 10 | 6 | 3/16" | Countersunk | 0000000 | 0000000 |
Heavy Duty Swinging Bar Latches
Designed to stand up to heavy use, this latch is often seen on refrigerators and truck doors. It's reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Arm Mounting Plate | Strike Plate | Mounting | Mounting Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Projection | Lg. | Ht. | Lg. | Ht. | Fasteners Included | Screw Size | No. of | Dia. | Style | Each | |
Zinc-Plated Steel—Dull | ||||||||||||
| 7 1/4" | 1 7/8" | 1 1/2" | 2 1/4" | 7/8" | 3 3/8" | No | No. 10 | 6 | 3/16" | Countersunk | 0000000 | 0000000 |
Push-Button Release Swinging Bar Latches
Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar. Latches are reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Arm Mounting Plate | Strike Plate | Mounting Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Projection | Lg. | Ht. | Lg. | Ht. | Mounting Fasteners Included | No. of | Dia., mm | Style | Each | |
304 Stainless Steel—Polished | |||||||||||
| 1 15/16" | 11/16" | 9/16" | 1 5/8" | 9/16" | 1 5/8" | Yes | 4 | 3 | Straight | 0000000 | 000000 |
| 2 1/2" | 13/16" | 5/8" | 1 13/16" | 5/8" | 1 13/16" | Yes | 4 | 4 | Straight | 0000000 | 00000 |
| 4 1/8" | 1 1/16" | 1" | 3 3/16" | 1" | 3 3/16" | Yes | 4 | 5 | Straight | 0000000 | 00000 |
Screw-Tight Swinging Bar Latches
Tighten the screw on the strike plate to secure the bar and prevent accidental unlatching. Latches are reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Swinging Bar Latches
These latches are reversible for right- and left-hand mounting.
Style A has a strike plate that creates a sleeve to hold the bar. A back catch holds the bar when it's not latched. This latch includes a machine screw for mounting.
For technical drawings and 3-D models, click on a part number.
Arm Mounting Plate | Strike Plate | Back Catch | Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Arm Lg. | Projection | Lg. | Ht. | Lg. | Ht. | Lg. | Ht. | Mounting Fasteners Included | No. of | Dia. | Style | Each | |
Zinc-Plated Steel—Dull | ||||||||||||||
| A | 4 7/8" | 1 1/4" | __ | __ | 1 1/8" | 3 13/16" | 7/8" | 2 3/4" | Yes | 5 | 1/4" | Countersunk | 0000000 | 000000 |
304 Stainless Steel—Polished | ||||||||||||||
| B | 1 9/16" | 1/2" | 7/16" | 1 3/8" | 7/16" | 1 3/8" | __ | __ | Yes | 4 | 1/8" | Straight | 0000000 | 00000 |
Tight-Hold Swinging Hook Latches
To prevent accidental unlatching due to vibration, there's a bushing in the eye.
For technical drawings and 3-D models, click on a part number.
Arm Mounting Plate | Strike Plate | Mounting | Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Projection | Lg. | Ht. | Lg. | Ht. | Bushing Material | Fasteners Included | Screw Size | No. of | Dia. | Style | Pkg. Qty. | Pkg. | |
304 Stainless Steel—Polished | ||||||||||||||
| 2 5/16" | 3/4" | 5/8" | 1 5/8" | 5/8" | 1 5/8" | Plastic | No | No. 8 | 4 | 3/16" | Countersunk | 1 | 00000000 | 00000 |
| 3" | 3/4" | 5/8" | 1 5/8" | 5/8" | 1 5/8" | Plastic | No | No. 8 | 4 | 3/16" | Countersunk | 1 | 00000000 | 0000 |
| 4" | 3/4" | 5/8" | 1 5/8" | 5/8" | 1 5/8" | Plastic | No | No. 8 | 4 | 3/16" | Countersunk | 1 | 00000000 | 0000 |
Pry-Resistant Lock Cylinders for Mortise-Mount Locks
Designed to withstand vandalism better than other lock cylinders, these are for use in locks that are mortise mounted into a cutout in the door. Choose them if you need lock cylinders that each open with a different key. They are commonly used in deadbolt door locks and touch bars with alarms. Cylinders have either a standard cam or a cam specifically for Adams-Rite locks. All have a five-pin tumbler locking mechanism.
For technical drawings and 3-D models, click on a part number.
Schlage C Keyway Style | ||||||
|---|---|---|---|---|---|---|
| Cylinder Lg. | Keying | Number of Keys Included | Material | Finish | Each | |
Standard Cam | ||||||
| 15/16" | Keyed Differently | 2 | Brass | Polished Brass | 000000 | 000000 |
Deadbolt Locks for Swinging Wire Partition Doors
Secure swinging doors in wire and chain link partitions. Lock opens with a turnpiece on one side and has an opening for a pry-resistant lock cylinder for mortise-mount locks (not included) on the other.
For technical drawings and 3-D models, click on a part number.
Swinging-Bar Toilet Partition Latches
Each latch comes with a strike plate and door stop.
For technical drawings and 3-D models, click on a part number.
Latches | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Arm | Arm Mounting Plate | Strike Plate | Stop | Replacement Latches | Replacement Strike Plates | Replacement Door Stops | ||||||||||||
| Lg. | Ht. | Thick. | Lg. | Ht. | Ht. | Wd. | Ht. | Wd. | Projection | Mounting Fasteners Included | Each | Each | Each | Each | ||||
304 Stainless Steel—Dull | ||||||||||||||||||
| 3 1/4" | 7/8" | 1/8" | 2" | 1 1/2" | 2 1/2" | 1 5/16" | 2 1/2" | 1 1/8" | 3/4" | Yes | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |