Suitable for use in tight spaces, these connectors have a narrow profile that takes up less space than standard wire splicing connectors. Use them to make quick, secure wire connections without crimping.

Grounding connectors have a hole in the top that allows a single ground wire through while multiple wires remain connected inside.

For technical drawings and 3-D models, click on a part number.

Filled with silicone, these connectors seal out moisture and prevent corrosion. There’s no crimping since you twist to connect wire by hand, so these connectors are good for jobs where you don’t want to carry around a lot of tools.

For technical drawings and 3-D models, click on a part number.

Made of porcelain, these connectors can withstand temperatures up to 1200° F. Use them to make quick, secure wire connections without crimping.

For technical drawings and 3-D models, click on a part number.

Grip the wings on these connectors to increase leverage when tightening. Use them to make quick, secure wire connections without crimping.

Grounding connectors have a hole in the top that allows a single ground wire through while multiple wires remain connected inside.

For technical drawings and 3-D models, click on a part number.

Large enough to be used with a wide range of wire sizes, these connectors can still fit into cramped outlet boxes. The rigid plastic top protects the connection and the flexible bottom skirt allows them to conform to tight spaces. These connectors make quick, secure wire connections without crimping. Grip the wings to increase leverage when tightening.

For technical drawings and 3-D models, click on a part number.

Soft molding over the wings provides a comfortable grip. Use these connectors to make quick, secure wire connections without crimping.

For technical drawings and 3-D models, click on a part number.

Suitable for use underground, these connectors consist of a twist-on wire connector and an abrasion- and moisture-resistant insulator tube. The tube is filled with grease that acts as a sealant. Use these connectors to make quick, secure wire connections without crimping.

Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications. Convenient for field installation, they allow you to install wire quickly without the need for crimping tools.

For technical drawings and 3-D models, click on a part number.

Sealed threads make these splices weather resistant. Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications. Convenient for field installation, they allow you to install wire quickly without the need for crimping tools.

For technical drawings and 3-D models, click on a part number.

Convenient for jobs where you don't have crimpers on hand, these wire taps twist together to connect a tap wire to a main wire. The cap locks the wire into place, making them good for high-vibration applications. As you twist the cap onto the main wire, it pierces the insulation, so you don’t need to strip the wire. However, you’ll need to strip the tap wire.

For technical drawings and 3-D models, click on a part number.

Tighten screws to connect a tap wire to a main wire. For easy installation, you can lay the main wire in these taps by sliding off the screw plate.

Covers (sold separately) are plastic, so they fully insulate wire taps when connected. They snap shut for quick installation.

Convenient for jobs when you don't have a crimping tool on hand, these butt splices have end caps that you twist instead of traditional crimping. The end caps lock the wire in place, making them good for high-vibration applications.

A good choice for jobs where you don’t have crimping tools on hand, these connectors twist on to install wire quickly. Some connectors are easy grip, so they have wings that increase your leverage when tightening.

Twist the threaded end cap onto a main wire and a tap wire to connect them without crimping. Since you twist to connect, these wire taps are convenient for jobs where you don’t have many tools on hand. The cap locks the wire into place, making them good for high-vibration applications. As you twist the cap onto the main wire, it pierces the insulation, so you don’t need to strip the wire. However, you need to strip the tap wire.