Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

For invisible bond lines, these adhesives dry clear.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives.

Solvents, oils, acids, and other chemicals won't degrade the bond of these adhesives.

These thick gels fill gaps up to 0.2" wide—the largest of any of our instant-bond adhesives.

An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.

Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.