About Plastic
More
Impact- and Chemical-Resistant PVC Rods
- Color: Gray
- Temperature Range: -40° to 140° F
- Tensile Strength: 5,600-6,700 psi (Good)
- Impact Strength: 10-18 ft.-lbs./in. (Excellent)
- Hardness: Rockwell R111-R116 (Hard)
- For Use Outdoors: No
- Specifications Met: UL 94 V-0
With nearly the same chemical resistance as standard PVC Type 1, these PVC Type 2 rods are more impact resistant. Use them to make parts for chemical-processing applications where protection from bumps and strikes is required. They offer excellent formablility and are good electrical insulators.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Lengths, ft. | Each | |
| 1/4" | 0" to 0.008" | 5 | 00000000 | 00000 |
| 3/8" | 0" to 0.011" | 5 | 00000000 | 00000 |
| 1/2" | 0" to 0.015" | 5 | 00000000 | 00000 |
| 5/8" | 0" to 0.019" | 5 | 00000000 | 00000 |
| 3/4" | 0" to 0.022" | 5 | 00000000 | 00000 |
| 7/8" | 0" to 0.026" | 5 | 00000000 | 00000 |
| Per Ft. | ||||
|---|---|---|---|---|
| 1" | 0" to 0.03" | 00000000 | 0000 | |
| 1 1/8" | 0" to 0.034" | 00000000 | 00000 | |
| 1 1/4" | 0" to 0.038" | 00000000 | 00000 | |
| 1 3/8" | 0" to 0.041" | 00000000 | 00000 | |
| 1 1/2" | 0" to 0.045" | 00000000 | 00000 | |
| 1 5/8" | 0" to 0.049" | 00000000 | 00000 | |
| 1 3/4" | 0" to 0.052" | 00000000 | 00000 | |
| 1 7/8" | 0" to 0.056" | 00000000 | 00000 | |
| 2" | 0" to 0.06" | 00000000 | 00000 | |
| 2 1/4" | 0" to 0.068" | 00000000 | 00000 | |
| 2 3/8" | 0" to 0.071" | 00000000 | 00000 | |
| 2 1/2" | 0" to 0.075" | 00000000 | 00000 | |
| 2 3/4" | 0" to 0.082" | 00000000 | 00000 | |
| 3" | 0" to 0.09" | 00000000 | 00000 | |
| 3 1/4" | 0" to 0.097" | 00000000 | 00000 | |
| 3 1/2" | 0" to 0.105" | 00000000 | 00000 | |
| 4" | 0" to 0.12" | 00000000 | 00000 | |
| 4 1/2" | 0" to 0.135" | 00000000 | 000000 | |
| 5" | 0" to 0.15" | 00000000 | 000000 | |
| 6" | 0" to 0.18" | 00000000 | 000000 |
Impact- and Chemical-Resistant PVC Sheets
- Color: Gray
- Temperature Range: 0° to 160° F
- Tensile Strength: 5,600-6,700 psi (Good)
- Impact Strength: 10-18 ft.-lbs./in. (Excellent)
- Hardness: Rockwell R111-R116 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D1784, UL 94 V-0
Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, these PVC Type 2 sheets are widely used for parts and tanks that are subject to shock. They are easy to thermoform and provide good electrical insulation.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | Each | |
6" × 6" | |||
|---|---|---|---|
| 1/16" | -0.0063" to 0.0063" | 000000000 | 00000 |
| 1/8" | -0.0125" to 0.0125" | 000000000 | 0000 |
| 1/4" | -0.025" to 0.025" | 000000000 | 0000 |
| 1/2" | -0.05" to 0.05" | 000000000 | 00000 |
| 3/4" | -0.075" to 0.075" | 000000000 | 00000 |
| 1" | -0.1" to 0.1" | 00000000 | 00000 |
12" × 12" | |||
| 1/16" | -0.0063" to 0.0063" | 000000000 | 00000 |
| 1/8" | -0.0125" to 0.0125" | 000000000 | 00000 |
| 1/4" | -0.025" to 0.025" | 000000000 | 00000 |
| 1/2" | -0.05" to 0.05" | 000000000 | 00000 |
| 3/4" | -0.075" to 0.075" | 000000000 | 00000 |
| 1" | -0.1" to 0.1" | 00000000 | 00000 |
12" × 24" | |||
| 1/16" | -0.0063" to 0.0063" | 000000000 | 00000 |
| 1/8" | -0.0125" to 0.0125" | 000000000 | 00000 |
| 1/4" | -0.025" to 0.025" | 000000000 | 00000 |
| 1/2" | -0.05" to 0.05" | 000000000 | 00000 |
| 3/4" | -0.075" to 0.075" | 000000000 | 000000 |
| 1" | -0.1" to 0.1" | 00000000 | 000000 |
24" × 24" | |||
| 1/16" | -0.0063" to 0.0063" | 000000000 | 00000 |
| 1/8" | -0.0125" to 0.0125" | 000000000 | 00000 |
| 1/4" | -0.025" to 0.025" | 000000000 | 00000 |
| 1/2" | -0.05" to 0.05" | 000000000 | 000000 |
| 3/4" | -0.075" to 0.075" | 000000000 | 000000 |
| 1" | -0.1" to 0.1" | 00000000 | 000000 |
24" × 48" | |||
| 1/16" | -0.0063" to 0.0063" | 000000000 | 00000 |
| 1/8" | -0.0125" to 0.0125" | 000000000 | 00000 |
| 1/4" | -0.025" to 0.025" | 000000000 | 000000 |
| 1/2" | -0.05" to 0.05" | 000000000 | 000000 |
| 3/4" | -0.075" to 0.075" | 000000000 | 000000 |
| 1" | -0.1" to 0.1" | 00000000 | 000000 |
Impact- and Chemical-Resistant PVC 90° Angles
- Color: Black
- Temperature Range: See table
- Tensile Strength: 5,600 psi (Good)
- Impact Strength: 20 ft.-lbs./in. (Excellent)
- Hardness: Durometer 80D (Hard)
- For Use Outdoors: Yes
- Specifications Met: UL 94 V-0, NSF/ANSI 51
Made of PVC Type 2 plastic, these 90° angles resist impact and chemicals. More impact resistant than PVC Type 1, PVC Type 2 is commonly used where protection from bumps and strikes is needed. It’s also more impact resistant than silicone, although not as resistant to heat. Since it stands up to acids and alkalies, it’s often used to make parts for chemical processing applications.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Temperature Range, °F | 2 ft. Lg. | 4 ft. Lg. | 8 ft. Lg. | |
0.06" Wall Thickness (-0.01" to 0.01") | ||||||||||
| 1/2" | -0.01" to 0.01" | 1/2" | -0.01" to 0.01" | 0.44" | 0.44" | 40° to 140° | 00000000 | |||
| 1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.94" | 0.94" | 40° to 140° | 00000000 | |||
0.06" Wall Thickness (-0.008" to 0.008") | ||||||||||
| 3/4" | -0.015" to 0.015" | 3/4" | -0.015" to 0.015" | 0.69" | 0.69" | 40° to 140° | 0000000 | |||
0.065" Wall Thickness (-0.01" to 0.01") | ||||||||||
| 1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.435" | 1.435" | 40° to 140° | 00000000 | |||
| 2" | -0.02" to 0.02" | 2" | -0.02" to 0.02" | 1.935" | 1.935" | -20° to 140° | 00000000 | |||
0.1" Wall Thickness (-0.015" to 0.015") | ||||||||||
| 3/4" | -0.015" to 0.015" | 3/4" | -0.015" to 0.015" | 0.65" | 0.65" | 40° to 140° | 00000000 | |||
| 1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.9" | 0.9" | 40° to 140° | 00000000 | |||
| 2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.9" | 1.9" | 40° to 140° | 00000000 | |||
| 3" | -0.03" to 0.03" | 3" | -0.03" to 0.03" | 2.885" | 2.885" | -20° to 140° | 00000000 | |||
0.1" Wall Thickness (-0.01" to 0.01") | ||||||||||
| 1 1/2" | -0.02" to 0.02" | 1 1/2" | -0.02" to 0.02" | 1.39" | 1.39" | -20° to 140° | 00000000 | |||
3/16" Wall Thickness (-0.02" to 0.02") | ||||||||||
| 1 1/2" | -0.025" to 0.025" | 1 1/2" | -0.025" to 0.025" | 1.312" | 1.312" | 40° to 140° | 00000000 | |||
| 2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.812" | 1.812" | 40° to 140° | 00000000 | |||
3/16" Wall Thickness (-0.0195" to 0.0195") | ||||||||||
| 3/4" | -0.02" to 0.02" | 3/4" | -0.02" to 0.02" | 0.542" | 0.542" | -20° to 140° | 00000000 | |||
| 1" | -0.02" to 0.02" | 1" | -0.02" to 0.02" | 0.792" | 0.792" | -20° to 140° | 00000000 | |||
1/4" Wall Thickness (-0.02" to 0.02") | ||||||||||
| 1 1/2" | -0.02" to 0.02" | 1 1/2" | -0.02" to 0.02" | 1.23" | 1.23" | -20° to 140° | 00000000 | |||
| 2" | -0.025" to 0.025" | 2" | -0.025" to 0.025" | 1.73" | 1.73" | -20° to 140° | 00000000 | |||