Detect leaks and contamination while keeping both your hands free. These headlamps use UV light to reveal dyes, particles, and chemicals with fluorescent qualities, making cracks and defects easy to spot. Each headlamp also has a regular LED light to see in dim and dark areas. Both bulbs emit a focused, uniform light beam that works best for close-up inspections.

Headlamps with a motion sensor switch between brightnesses, beam patterns, and bulb types with a wave of your hand. They’re helpful when your gloves are oily or dirty. You can also press a button to switch between these modes. The additional bull’s eye beam pattern has a wide angle to illuminate at a distance.

Wire terminals allow you to connect these bulbs to a power source through a panel. These bulbs are sized to fit into tight spaces such as signs, instruments, indicators, and flashlights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

Ultraviolet LED bulbs are often used to sterilize surfaces, cure adhesives, and detect leaks. Ultraviolet light is invisible to the human eye.

For technical drawings and 3-D models, click on a part number.

Safely cure light-activated adhesives, coatings, and ink or strengthen 3D-printed resin parts with UV light in these enclosed chambers. Also known as flood curing, they evenly cure your parts. They work just like a microwave. Plug them in, set your time, and they’re ready to cure.

Formlabs chambers can be preheated to save you curing time. While they’ll work on any resin 3D-printed parts, if you use them with parts made of Formlabs resins, you can choose preset cure times and temperature settings for consistent results.

Chambers with a turntable rotate parts under the lights for even exposure while curing. Because these chambers use low-intensity LED bulbs and only operate when the door is closed, additional UV-protective glasses or clothing while using them are not required.