McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    51 Products

    Push-to-Close Clamp Pipe Hangers

    Image of Product. Front orientation. Pipe Hangers. Push-to-Close Clamp Pipe Hangers.
    Lock pipe, tube, and conduit into place in a single step. Press material into the open hanger, then close by hand—no tools or adjustments needed. Mount with a fastener through the unthreaded hole.
    Nylon—Lightweight, nonconductive, and naturally rust resistant. The plastic won't cause corrosion on metal parts. It does swell and weaken when exposed to moisture, so these are best for dry environments.
    HDPE—FDA compliant for direct contact with food. These hangers stand up to chemicals such as strong acids, bases, and solvents without swelling or losing strength. They also keep their shape in washdown environments.
    Strut Channel Adapters—Attach to hangers to mount them on strut channel.
    Threaded Rod Adapters—Attach to hangers to mount them on threaded rod.
    Pipe Hangers
    Strut
    Channel Adapters
    Threaded Rod
    Adapters
    ID
    Mounting
    Hole
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    Wt. Cap.,
    lb.
    Dia.
    Lg.
    Wd.
    Food Industry Std.
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Strut-Channel/Threaded-Rod/Wall Mount
     
    Nylon Plastic
    7/16" to 1/2"12 to 141/8, 1/4
    		1/4, 3/8
    		140—5/16"3/16"—1030075T11200000130075T29000001030075T2100000
    9/16" to 5/8"15 to 171/4, 3/8
    		3/8, 1/2
    		150—5/16"3/16"—1030075T1130000130075T2900001030075T210000
    5/8" to 3/4"17 to 203/8
    		1/2, 5/8
    		160—5/16"3/16"—530075T1140000130075T2900001030075T210000
    3/4" to 13/16"20 to 221/2
    		5/8, 3/4
    		180—5/16"3/16"—530075T1150000130075T2900001030075T210000
    13/16" to 7/8"22 to 231/2
    		3/4
    		200—5/16"3/16"—530075T1160000130075T2900001030075T210000
    15/16" to 1 1/16"25 to 283/4
    		—230—5/16"3/16"—530075T1170000130075T2900001030075T210000
    1 1/16" to 1 3/16"28 to 31—1
    		240—5/16"3/16"—530075T1180000130075T2900001030075T210000
    1 1/4" to 1 3/8"32 to 361
    		1 1/4
    		2403/8"———130075T1190000130075T290000130075T240000
    1 3/8" to 1 1/2"36 to 401
    		1 1/4
    		2403/8"———130075T2110000130075T290000130075T240000
    1 9/16" to 1 11/16"40 to 431 1/4
    		1 1/2
    		2403/8"———130075T2120000130075T290000130075T240000
    1 13/16" to 2"47 to 511 1/2
    		—2403/8"———130075T2130000130075T290000130075T240000
    2" to 2 3/16"51 to 56—2
    		3003/8"———130075T2140000130075T290000130075T240000
    2 5/16" to 2 1/2"59 to 642
    		2
    		3603/8"———130075T2150000130075T290000130075T240000
    2 3/4" to 3 1/8"71 to 802 1/2
    		3
    		4601/2"———130075T2160000130075T310000130075T250000
    3 1/8" to 3 1/2"80 to 903
    		3
    		8101/2"———130075T21700000130075T310000130075T250000
    4 7/16" to 5"113 to 1274
    		—1,3001/2"———130075T21800000130075T310000130075T250000
     
    HDPE Plastic
    7/16" to 1/2"12 to 141/8, 1/4
    		1/4, 3/8
    		80—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		1030075T41100000130075T2900001030075T210000
    9/16" to 5/8"15 to 171/4, 3/8
    		3/8, 1/2
    		90—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		1030075T41200000130075T2900001030075T210000
    5/8" to 3/4"17 to 203/8
    		1/2, 5/8
    		100—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		530075T4130000130075T2900001030075T210000
    3/4" to 13/16"20 to 221/2
    		5/8, 3/4
    		100—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		530075T4140000130075T2900001030075T210000
    13/16" to 7/8"22 to 231/2
    		3/4
    		130—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		530075T4150000130075T2900001030075T210000
    15/16" to 1 1/16"25 to 283/4
    		—130—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		530075T4160000130075T2900001030075T210000
    1 1/16" to 1 3/16"28 to 31—1
    		140—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		530075T41700000130075T2900001030075T210000
    1 1/4" to 1 3/8"32 to 361
    		1 1/4
    		1603/8"——FDA Compliant 21 CFR 177.1520
    		130075T4180000130075T290000130075T240000
    1 3/8" to 1 1/2"36 to 401
    		1 1/4
    		1603/8"——FDA Compliant 21 CFR 177.1520
    		130075T4190000130075T290000130075T240000
    1 9/16" to 1 11/16"40 to 431 1/4
    		1 1/2
    		1803/8"——FDA Compliant 21 CFR 177.1520
    		130075T4210000130075T290000130075T240000
    1 13/16" to 2"47 to 511 1/2
    		—1203/8"——FDA Compliant 21 CFR 177.1520
    		130075T4220000130075T290000130075T240000
    2" to 2 3/16"51 to 56—2
    		1903/8"——FDA Compliant 21 CFR 177.1520
    		130075T4230000130075T290000130075T240000
    2 5/16" to 2 1/2"59 to 642
    		2
    		1503/8"——FDA Compliant 21 CFR 177.1520
    		130075T4240000130075T290000130075T240000
    2 3/4" to 3 1/8"71 to 802 1/2
    		3
    		6001/2"——FDA Compliant 21 CFR 177.1520
    		130075T4250000130075T310000130075T250000
    3 1/8" to 3 1/2"80 to 903
    		3
    		6901/2"——FDA Compliant 21 CFR 177.1520
    		130075T42600000130075T310000130075T250000
    4 7/16" to 5"113 to 1274
    		—1,1401/2"——FDA Compliant 21 CFR 177.1520
    		130075T42700000130075T310000130075T250000
     
    Spacers for Nylon Plastic Hangers
    Image of Product. Front orientation. Spacers for Pipe Hangers.
    Create consistent space between lines and mounting surfaces to provide extra clearance for insulation, wiring, or other components. You can also align multiple pipes at the same level when mounted on uneven surfaces.
    Lg.
    Wd.
    Ht.
    Temp.,
    ° F
    Pkg.
    Qty.
    Pkg.
    Nylon Plastic
    1 3/16"13/16"1 3/4"20 to 180530075T9100000
    2"1 3/16"3 3/8"20 to 180130075T920000
     

    Quick-Mount Push-to-Close Clamp Pipe Hangers

    Image of Product. Strut-Channel/Threaded-Rod Mount. Front orientation. Pipe Hangers. Quick-Mount Push-to-Close Clamp Pipe Hangers, Strut-Channel/Threaded-Rod Mount.

    Strut-Channel/Threaded-Rod

    Mount

    Install and lock your line into place faster than any other hanger we sell. Snap the hanger onto a threaded rod, then press your line into the open hanger and close by hand without extra tools or adjustments.
    Strut-Channel Mount—These hangers also connect to strut channel without additional fasteners.
    Nylon—Lightweight, nonconductive, and naturally rust resistant. The plastic won't cause corrosion on metal parts. It does swell and weaken when exposed to moisture, so these are best for dry environments.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    For Thread
    Size
    For Strut
    Channel Wd.
    Wt. Cap.,
    lb.
    Each
    Strut-Channel/Threaded-Rod Mount
     
    Nylon Plastic
    1/2" to 5/8"12 to 161/4
    		3/8, 1/2
    		3/8"-16
    		1 5/8"1703166T4100000
    11/16" to 3/4"17 to 203/8
    		5/8
    		3/8"-16
    		1 5/8"1903166T420000
    13/16" to 15/16"21 to 241/2
    		3/4
    		3/8"-16
    		1 5/8"2103166T430000
    1" to 1 1/8"25 to 293/4
    		1
    		3/8"-16
    		1 5/8"3103166T440000
    1 3/16" to 1 5/16"30 to 341
    		—3/8"-16
    		1 5/8"3203166T450000
    1 5/8" to 1 11/16"40 to 441 1/4
    		1 1/2
    		3/8"-16
    		1 5/8"3603166T460000
    1 7/8" to 2 1/8"48 to 541 1/2
    		2
    		3/8"-16
    		1 5/8"3803166T470000
    2 1/4" to 2 7/16"56 to 632
    		—3/8"-16
    		1 5/8"4103166T480000
    2 5/8" to 3"66 to 762 1/2
    		2 1/2
    		3/8"-16
    		1 5/8"5003166T490000
    3 1/8" to 3 5/8"79 to 933
    		3, 3 1/2
    		3/8"-16
    		1 5/8"6003166T510000
    4" to 4 1/2"101 to 1153 1/2, 4
    		4
    		3/8"-16
    		1 5/8"9503166T5200000
     

    Seismic Bracing Mounts

    Image of System. Angle Iron Mount. Front orientation. Contains Annotated. Seismic Bracing Mounts. Seismic Bracing Mounts.
    Image of System. Ceiling Mount. Front orientation. Contains Annotated. Seismic Bracing Mounts. Seismic Bracing Mounts.

    Angle Iron Mount

    Ceiling Mount

    Image of System. Beam Mount. Front orientation. Contains Annotated. Seismic Bracing Mounts. Seismic Bracing Mounts.

    Beam Mount

    These OSHPD preapproved anchors and brackets support threaded-rod-mount hangers during seismic activity. A complete seismic bracing mount system consists of an upper bracket, a lower bracket, and strut or pipe (sold separately). Brackets work with standard-wall (Schedule 40) pipe sizes 1-2 as well as 1 5/8" wide strut channel. Mount the upper bracket directly to a ceiling or other flat surface, or use an anchor to mount the system to angles, beams, and joists.
    Lower Bracket for Pipe and Strut Channel
    Image of Product. Front orientation. Seismic Bracing Mounts. Seismic Bracing Mounts, Lower Bracket for Pipe and Strut Channel.
    Lower brackets connect threaded rods to the lower end of the strut or pipe. They have a hinge that allows the system to sway during seismic activity.
    For
    Suspending
    For Pipe
    Schedule
    For Strut
    Thk.
    For Threaded
    Rod Dia.
    Threaded Rod
    Included
    Wd.
    Lg.
    Ht.
    Material
    Wt. Cap.,
    lb.
    No. of Set Screws
    Included
    Certification
    Includes
    Each
    Threaded Rods40
    		7/64"3/8" to 5/8"No2 1/4"5 1/8"1 13/16"Zinc-Plated Steel1,0002OSHPD Preapproved
    		Set Screws2573N12000000
    back to top