Unthreaded Metal Spacers

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Specifications Met Specifications Met

3-A Sanitary Certified

	Finish Finish

	Color Color

	Off-White
	Black
	White
	Gray
	Beige
	Clear
	Green
	Red
	Light Green
	Brown
	Blue
	Orange
	Purple
	Coral
	Yellow
	Aluminum
	Amber
	Brown/Black
	Gold
	Pink
	Silver
	Teal

	Plain Bearing Type Plain Bearing Type


Sleeve	Flanged

Thrust

	Tensile Strength Tensile Strength

70,000 psi or greater

Not Rated

	Hex Size Hex Size

	Gender Gender


Female	Male

	For Housing ID For Housing ID

Forward

How can we improve?

34,764 Products

Unthreaded Spacers

Aluminum Unthreaded Spacers

Made of aluminum, these spacers are lightweight and mildly corrosion resistant.

18-8 Stainless Steel Unthreaded Spacers

18-8 stainless steel spacers have good corrosion resistance.

Zinc-Plated Steel Unthreaded Spacers

The zinc plating provides some corrosion resistance.

316 Stainless Steel Unthreaded Spacers

These spacers have excellent corrosion resistance and are passivated for enhanced protection.

Black-Anodized Aluminum Unthreaded Spacers

The anodized coating on these lightweight spacers provides increased abrasion resistance over uncoated aluminum.

Zinc-Plated Brass Unthreaded Spacers

Brass makes these spacers electrically conductive and the zinc-plated finish adds corrosion resistance.

Titanium Unthreaded Spacers

Withstanding salt water, acids, and chemicals, these spacers resist corrosion better than any other metal spacer we offer. They have a high strength-to-weight ratio and are about 40% lighter than steel spacers.

Nylon Unthreaded Spacers

These spacers have excellent wear and abrasion resistance. Exposure to moisture may cause them to expand.

Polyethylene Unthreaded Spacers

Almost nonabsorbent, these unthreaded LDPE and HDPE spacers won't swell when exposed to water.

Polypropylene Unthreaded Spacers

Polypropylene spacers have a hard surface and resist many chemicals and solvents.

PTFE Unthreaded Spacers

PTFE spacers have a slippery surface and surpass most plastic spacers when it comes to chemical resistance and performance in extreme temperatures.

Acetal Unthreaded Spacers

Naturally slippery and wear resistant, acetal spacers also offer some resistance to moisture.

PEEK Unthreaded Spacers

Use PEEK spacers as an alternative to metal spacers in high-temperature, high-stress applications. They resist chemicals, wear, and moisture.

Polycarbonate Unthreaded Spacers

Made of FDA-listed material, these clear spacers can be used in food and beverage applications.

Polished Unthreaded Spacers

A nickel-chrome plating gives these spacers a mirror-like finish.

Unthreaded Spacer Stock

Cut stock to the length you need.

Vibration-Damping Unthreaded Spacers

Reduce vibration, shock, and noise with these spacers that compress between components.

Made-to-Order Unthreaded Spacers

Choose the OD, ID, length, and material and we will accommodate your unique spacer needs.

Electrical-Insulating Unthreaded Spacers

Protect components from electrical charges.

Sanitary Unthreaded Spacers

Create space to clean between components on food processing lines and other sanitary equipment.

Slotted Unthreaded Spacers

An economical alternative to standard unthreaded spacers.

Unthreaded Spacers for Tubes

Also known as saddle washers, the curved end fits against round objects such as tube and pipe.

Unthreaded Spacers for Angles

The 45° end fits against an angled surface to create a flat surface for connection.

Unthreaded Spacers for Keyed Shafts

Also known as arbor spacers, these are notched to space components on a keyed shaft.

Threaded Standoffs

Female Threaded Hex Standoffs

NAS Female Threaded Hex Standoffs

Choose these standoffs for their adherence to NAS 1831 specifications.

Male-Female Threaded Hex Standoffs

Position components in assemblies, as well as separate or connect parts with these standoffs.

Thread-Locking Male-Female Threaded Hex Standoffs

A nylon patch bonded to the threads adds friction, preventing these standoffs from loosening from vibration.

NAS Male-Female Threaded Hex Standoffs

These standoffs are made to NAS specifications.

Female Threaded Round Standoffs

Male Threaded Standoffs

Female Pillar Posts

Male-Female Pillar Posts

Polished Female Threaded Round Standoffs

A nickel-chrome plating gives these standoffs a mirror-like finish.

Jack Screws

Secure computer cables and panels.

Hinged Male-Female Threaded Round Standoffs

Hinged Male Threaded Round Standoffs

Hinged Female Threaded Round Standoffs

Magnet-Backed Standoffs

The magnetic end of these standoffs makes it easy to temporarily mount or reposition components on magnetic surfaces.

Press-Fit Unthreaded Spacers

Also known as captive spacers, the splines on these bite into a panel for a permanent hold.

Press-Fit Threaded Standoffs

Press-Fit Threaded Standoffs with Closed End

Also known as captive standoffs, a recess under the hex clinches the panel for a strong hold that won't push, pull, or twist out. When mounted, the hex sits flush with the surface and the closed end creates a neat, finished appearance.

Press-Fit Threaded Standoffs with Open End

A recess under the hex clinches a panel for a strong hold that won't push, pull, or twist out. When mounted with a lever press, the hex sits flush with the surface and the open end creates a through hole.

Miniature Press-Fit Threaded Standoffs with Open End

These standoffs are designed to fit in the limited space of compact electronics such as laptops and hand-held devices.

Splined Press-Fit Threaded Standoffs with Open End

Press-Fit Supports

Press-Fit Snap-Top Supports

With the end clinched in place, the prongs allow you to quickly snap a panel on and off these supports.

Press-Fit Keyhole Supports

Once the end is clinched in place, panels with keyholes easily slide on and off these supports.

Crimp-On Female Threaded Round Standoffs

Often called swage standoffs because you permanently crimp them into a panel.

Washers

Metric Oversized Washers

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.

Oversized Washers

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

General Purpose Washers

Use these washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.

Metric General Purpose Washers

Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.

Mil. Spec. Washers

Choose these washers for their adherence to strict military standards for material and construction.

SAE Washers

SAE washers generally have a smaller ID and OD than USS washers.

ASME Washers

Also known as Type B washers, ASME washers are available in narrower and wider diameters than SAE and USS washers.

USS Washers

USS washers generally have a larger ID and OD than SAE washers.

Washers with Material Certification

These washers come with a traceable lot number and a physical and chemical test report.

Washers for Structural Applications

Designed for use with structural screws, studs, and nuts, these washers are often used for construction and exterior building applications.

Metric Washers for Structural Applications

These thick washers are designed to support structural screws, studs, and nuts.

Tension-Indicating Washers for Structural Applications

When you’ve applied the correct tension, these washers release an orange dye as a visual indicator.

Washers for Blind Rivets

Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.

Washer Blanks

Punch a hole to create a custom washer.

Plastic Washers

These plastic washers are good electrical insulators.

Metric Plastic Washers

These plastic washers are good electrical insulators.

Mil. Spec. Plastic Washers

Choose these washers for their adherence to strict military standards for material and construction.

Water- and Steam-Resistant Plastic Washers

Low moisture absorption and good heat resistance make these washers suitable for wet and harsh environments.

Metric Water- and Steam-Resistant Plastic Washers

Low moisture absorption and good heat resistance make these metric washers suitable for wet and harsh environments.

Chemical-Resistant Plastic Washers

These washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease.

Metric Chemical-Resistant Plastic Washers

These metric washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease.

Mil. Spec. Chemical-Resistant Plastic Washers

Choose these washers for their adherence to strict military standards for material and construction.

Electrical-Insulating Plastic Washers

These washers are excellent electrical insulators.

Metric Electrical-Insulating Plastic Washers

These washers are excellent electrical insulators.

High-Temperature Plastic Washers

These washers can withstand temperatures up to 450° or 500° F without degrading.

Metric High-Temperature Plastic Washers

These metric washers can withstand temperatures up to 450° or 500° F without degrading.

Metric Extreme-Temperature Ceramic Washers

These metric washers hold up in blistering temperatures up to 3000° F.

Extreme-Temperature Ceramic Washers

These washers hold up in blistering temperatures up to 3000° F.

High-Temperature Mica Washers

Mica washers withstand temperatures up to 1050° F.

Electrical-Insulating Sleeve Washers

Also known as shoulder washers.

Electrical-Insulating Rolled-Collar Sleeve Washers

As you tighten your screw, the rolled collar compresses under the head to create an insulating barrier between a screw shank and a mating surface.

Electrical-Insulating Cup Sleeve Washers

These washers have a flat bottom and high walls to protect metal screw heads from electrical current.

Metric Countersunk Washers

Flat and oval head screws sit flush within these metric washers for a neat, finished appearance.

Countersunk Washers

Flat and oval head screws sit flush within these washers for a neat, finished appearance.

Plastic Countersunk Washers

Plastic washers are good electrical insulators.

Finishing Countersunk Washers

Metric Finishing Countersunk Washers

Square Washers

Square washers fit into slots and channels and have flat sides to keep them from rotating.

Square Washers for Blind Rivets

Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.

Self-Retaining Washers

Specially shaped tabs grip your screw shank tightly.

Easy-Install Slotted Washers

A slot in the side allows you to install and remove these washers without completely disassembling your joint.

Plastic Washers for Rigid Insulation

Plastic washers resist moisture, chemicals, and friction and are good electrical insulators.

Steel Washers for Rigid Insulation

Steel washers provide a stronger bearing surface than plastic washers

Sleeve Washers for Soft Material

Reinforce holes in soft material to keep them from collapsing around screws.

Double-Clipped Washers

Clipped on both sides to fit where standard washers can't, these won't rotate when you position the flat edges against a flat surface.

Clipped Washers

Clipped to fit where standard washers can't, these won't rotate when you position the flat edge against a flat surface.

Oversized Clipped Washers

With greater diameters and/or thicknesses than general purpose washers, these washers cover oversized holes or act as spacers and levelers. Clipped to fit where standard washers can’t, they won’t rotate when you position the flat edge against a flat surface.

Washers for Cross-Bracing

Connect cross-bracing rods or cables to structural beams.

Flanged Washers for Cross-Bracing

These washers have a flange to spread force across structural beams better than standard washers for cross-bracing rods and cables.

Oversized Washers for Wood

Prevent screws from sinking into wood—these washers have a large OD.

Washers for Electrical Terminals

To keep electrical connections intact, these washers retain wires so they won't slip out from under your screw head.

Cup Washers for Oversized Holes

Cover oversized holes and the ends of tubes and pipe with these cup-shaped washers.

Angled-Edge Washers for Tie-Down Straps

Use the angled edges to hold and align tie-down straps.

Angled-Edge Washers for
Toggle Clamp Holding Screws

Use on clamps with open arms to keep the holding screw in place.

Rectangular Washers

Narrower than clipped and square washers, these washers are an excellent choice for slots, channels, and other tight spaces.

Washers for Foam Insulation

These washers have prongs that pierce foam insulation so they stay in place.

Magnetic Washers

Made from neodymium, these washers stay in place on iron and steel surfaces for easy mounting and installation.

Washers for Plaster

Repair sagging, cracked plaster with these washers. The holes allow plaster to flow through to form a secure bond between the washer and the wall.

Adhesive-Back Washers

Peel the backing off these washers and stick them onto a surface for easy mounting and assembly.

Curved Washers

Also known as saddle washers, these curved washers fit round surfaces such as tubes and pipe.

Washers for Square-Neck Bolts

A square hole prevents these washers from turning with the bolt or shaft.

Spring Lock Washers

Spring Lock Washers for Slotted Bearing Nuts

Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle.

Belleville Spring Lock Washers

Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers.

Belleville Spring Lock Washers for Socket Head Screws

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

Spring Lock Washers for Plastic Screws

Designed for use with plastic screws, these acetal washers are good electrical insulators. They are excellent for use under water and in rotating assemblies.

Metric Spring Lock Washers

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

Split Lock Washers

Metric Split Lock Washers

As a screw is tightened, these metric washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.

Split Lock Washers

As a screw is tightened, these washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.

Mil. Spec. Split Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Oversized Split Lock Washers

Compared to standard split lock washers, these are thicker and have larger outside diameters.

Split Lock Washers for Socket Head Screws

Also known as high-collar lock washers, these have a smaller outside diameter than standard split lock washers to fit neatly under socket head cap screws.

Metric Split Lock Washers for Socket Head Screws

Also known as high-collar lock washers, these metric washers have smaller outside diameters than standard split lock washers to fit neatly under socket head cap screws.

Tooth Lock Washers

Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with fasteners that have small heads, such as fillister and cheese head screws.

Metric Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with metric fasteners that have small heads, such as fillister and cheese head screws.

Mil. Spec. Internal-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Internal-Tooth Lock Washers for Soft Material

Slightly domed with an oversized outside diameter, these washers distribute your fastener's load over a larger surface area than other internal-tooth lock washers to limit damage to soft material.

Internal-/External-Tooth Lock Washers

The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.

Tight-Grip External-Tooth Lock Washers

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.

Metric External-Tooth Lock Washers

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

External-Tooth Lock Washers

Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.

Mil. Spec. External-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Countersunk Tight-Grip External-Tooth Lock Washers

To keep 90° countersunk screws from loosening in vibration applications, the teeth on these washers bite further into the screw head and joint than standard external-tooth lock washers for a more secure hold.

Countersunk External-Tooth Lock Washers

The teeth on these washers firmly grip heads of 82° flat head countersunk screws.

Wedge Lock Washers

Comparable to NORD-LOCK® or Sherex TEC Series washers, these two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting.

Tab Lock Washers

Bend one tab against the side of the mounting surface and the other tab against the flats on a bolt or nut to prevent both the fastener and washer from turning and loosening in high-vibration applications, such as a motor mount.

Metric Tab Lock Washers

Bend the tab on these metric lock washers to prevent the fastener and washer from turning and loosening due to vibration.

Lock Washers for Square-Neck Bolts

Designed for use with square-neck bolts such as carriage bolts, these washers have teeth that dig into wood and other soft material to prevent rotation.

Coil Lock Washers

Keep tension when fastening materials prone to expanding and contracting, such as wood. The coil of these washers prevents nuts and bolts from loosening.

Sealing Washers

Weather-Resistant Rubber Sealing Washers

Sunlight, ozone, and water won’t affect these washers.

Oil-Resistant Rubber Sealing Washers

These washers surpass other rubber washers when it comes to withstanding oil, grease, and fuel.

Chemical-Resistant Rubber Sealing Washers

These washers withstand harsh chemicals such as acetic acid and isopropyl alcohol.

Abrasion-Resistant Rubber
and Plastic Sealing Washers

Made of durable material, these washers resist wear from rubbing and scraping surfaces.

High-Pressure-Rated Metal-Bonded Sealing Washers

Able to withstand pressure greater than 3,000 psi, these one-piece bonded washers create the tightest seals.

Metric High-Pressure-Rated
Metal-Bonded Sealing Washers

Able to withstand pressure greater than 2,000 psi, these one-piece bonded washers create the tightest seals.

Pressure-Rated Metal-Bonded Sealing Washers

These washers are rated to withstand pressure up to 100 psi.

Pressure-Rated Metal-Bonded Sealing
Washers for Nuts and Washers

Also known as thread-sealing washers, use these under nuts and other washers.

Metal-Bonded Sealing Washers

Create a stronger seal than metal or rubber alone. These one-piece washers are metal for strength with a bonded rubber seal that creates a tight grip.

Metal-Bonded Sealing Washers for Enclosures

Mount components to your enclosure without worrying about leaks.

Sanitary Metal-Bonded Sealing Washers

Eliminate cavities under screw heads where contamination may occur.

Metal Sealing Washers

Also known as crush washers, these compress when tightened to form a tighter, more durable seal than rubber washers. They are commonly used to seal fluids such as oil and fuel.

Fiber Sealing Washers

Made of fiber, these washers create a seal with minimal torque and reseal better than copper and aluminum washers.

Leveling and Wave Washers

Triple-Wave Washers

With three points of surface contact, these washers provide more stability than single-wave washers.

Single-Wave Washers

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Metric Single-Wave Washers

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Leveling Washers for I-Beams

Commonly called beveled washers, these are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.

Metric Leveling Washers for I-Beams

Commonly called beveled washers, these metric washers are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.

Leveling Washers

Also known as spherical washers, these consist of a male and female washer that, when nested, swivel slightly to compensate for tolerance variations and uneven surfaces.

Metric Leveling Washers

Also known as spherical washers, these consist of a metric male and female washer that, when nested, swivel slightly to compensate for tolerance variations and uneven surfaces.

Leveling Washers for U-Channels

Tapered to fit in a U-channel, these washers create a parallel bearing surface.

Cushioning Washers

Abrasion-Resistant Cushioning Washers

These SBR rubber washers are reinforced with cloth fibers.

Abrasion-Resistant Leather Washers

These leather washers are nonmarring.

Chemical-Resistant Cushioning Washers

Made of Buna-N rubber, these washers offer excellent chemical, weather, and oil resistance. The raised grid pattern prevents sideways shifting.

Cushioning Washers

These wool felt washers can be soaked with oil to lubricate joints.

Moisture-Resistant Cushioning Washers

These polyurethane washers withstand wet conditions as well as sunlight, ozone, and some chemicals.

Countersunk Cushioning Washers

Protect countersunk holes from damage and wear.

Round Shims

Ring Shims

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Ring Shim Sets

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

Tight-Fit Ring Shims

For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.

Wide-Rim Ring Shims

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.

Color-Coded Ring Shims

Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims, which are color-coded by thickness for easy identification.

Color-Coded Ring Shim Sets

Be prepared with ring shims in a variety of thicknesses. These shims are color-coded by thickness for easy identification.

Peel-Away Layered Ring Shims

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

Shims for Lengthening Screw Shoulders

Spin these shims onto screw threads to extend the shoulder length.

Shims for Shortening Screw Shoulders

Slide these shims under the screw head to shorten the shoulder length.

Shims for Keyed Shafts

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.

Shim Sets for Keyed Shafts

Be prepared with shims in a variety of thicknesses. Also known as arbor spacers, these shims are notched to fit over keyed shafts.

Shims for Ball Bearings

Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.

Shims for Ball Bearing Housings

Also called tolerance rings, these rings are for use in stamped, molded, or worn housings to form a tight hold on the bearings.

Shims for Button Dies

Place these shims under sharpened dies to restore their original height and extend their life.

Disc Shims

Use these round shims as they are, or punch out the middle to create the ID you need.

Shims for D-Profile Shafts

These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Shim Sets for D-Profile Shafts

Be prepared with shims in a variety of thicknesses. These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Slotted Shims

Breakaway Slotted Shims

These shims are scored so you can easily shorten them to the length you need. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.

Slotted Shims

The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Slotted Shim Sets

Be prepared with slotted shims in a variety of thicknesses. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Color-Coded Slotted Shims

These shims are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Color-Coded Slotted Shim Sets

Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Large-Adjustment Slotted Shims

Use these thick shims to align cabinets, doors, and windows, or for other rough leveling.

Horseshoe Shims

Align cabinets, doors, and windows with these shims. The horseshoe design fits around screws.

Color-Coded Horseshoe Shims

These shims are color-coded by thickness for easy identification. The horseshoe design fits around screws.

Interlocking Color-Coded Horseshoe Shims

Clips on these shims hold them together when stacked, and they are color coded by thickness for easy identification. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.

Shims for Hinges

Slide these shims behind your door’s hinge to align it in the jamb.

Multi-Slotted Shims

Use a single shim on feet or positioning arms that are secured with multiple fasteners. The slots let you insert, remove, and adjust the shims without disassembling your machinery. Also known as finger shims.

Multi-Slotted Shim Sets

Each set includes a variety of different thicknesses, so you can use multiple shims together to create a specific thickness or make minor adjustments.

Plastic Shim Plates

Breakaway Shim Plates

These thick shims are scored to make size adjustments easy—break off the excess shim for a custom fit around fasteners or corners. Use them to align cabinets, doors, and windows, or for other rough leveling.

Slip-Resistant Shim Plates

The textured surface of these thick shims keeps them from sliding apart when stacked. Use them to align cabinets, doors, and windows, or for other rough leveling.

Shim Stock

Adhesive-Back Shim Stock

A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.

Shim Tape

Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.

Peel-Away Layered Shim Stock

Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Shim Stock

Cut this stock into custom shapes to fit your application.

Shim Stock Sets

Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.

Color-Coded Shim Stock Sets

Keep shim stock in a variety of thicknesses on hand with these sets, which are color coded by thickness for easy identification. Cut them into custom shapes to fit your application.

Color-Coded Shim Stock

This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.

Tapered Shims

Heavy Duty Tapered Shims

Ridges keep these aluminum shims from sliding apart when stacked. Designed for aligning shafts and axles, they support heavier loads than plastic tapered shims.

Slotted Tapered Shims

The slot lets you install these rigid shims around screws.

Breakaway Tapered Shims

Easily snap off any excess to get the length you need.

Tapered Shims

Ridges keep these shims from sliding apart when stacked.

Made-to-Order Shims

Send us a drawing, and we'll cut your custom shim.

Made-to-Order Peel-Away Layered Shims

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Unthreaded Inserts

Steel Unthreaded Inserts for Plastic

A zinc-plated finish gives these steel inserts mild corrosion resistance.

Aluminum Unthreaded Inserts for Plastic

These aluminum inserts are lightweight, nonmagnetic, and mildly corrosion resistant.

Brass Unthreaded Inserts for Plastic

Made from brass, these inserts are nonmagnetic, mildly corrosion resistant, and electrically conductive.

Unthreaded Inserts for Metal

Protect bolts from sideways (shear) pressure.

Fastener Assortments

Shim Stock Assortments

Create a custom shim to fit your application.

Shim Assortments for Shortening Shoulder Screws

Slide onto a shoulder screw to shorten the length of the shoulder.

Ring Shim Assortments

Use round shims to precisely align, level, and adjust spacing on shafts and machinery.

Shim Assortments for Button Dies

Place these shims under sharpened dies to restore their original height and extend the life of the dies.

Shim Assortments for Lengthening Shoulder Screws

Spin these tight-fitting shims onto your screw's threads to lengthen the shoulder.

Sleeve Washer Assortments

Also known as shoulder and insulator washers, these nonmetal washers block electrical current and prevent corrosion from mating different types of metal.

Tooth Lock Washer Assortments

Teeth bite into the joint for a tighter grip than split lock washers.

Oversized Washer Assortments

These washers have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

USS Washer Assortments

USS washers generally have a larger ID and OD than SAE washers.

Split Lock Washer Assortments

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Washer Assortments

SAE Washer Assortments

SAE washers generally have a smaller ID and OD than USS washers.

Sealing Washer Assortments

Also known as crush washers, the washers in these assortments compress when tightened to form a tight, durable seal that prevents leaks.

Unthreaded Spacer Assortments

Have different sizes and lengths of spacers ready for a variety of jobs.

Male-Female Threaded Hex Standoff Assortments

Keep a variety of standoffs in different lengths and thread sizes on hand.

Male-Female Thread Adapters

Inch-to-Inch Male-Female Hex Thread Adapters

Change thread sizes or types, such as fine to coarse threads, on parts without changing gender.

Metric-to-Metric Male-Female Hex Thread Adapters

In addition to joining male- and female-threaded parts, these adapters can increase or decrease metric thread sizes and change the thread pitch.

Inch-to-Metric Male-Female Hex Thread Adapters

Change inch threads to metric with these adapters, or swap metric threads for inch. An external hex lets you tighten or loosen them with a wrench.

Slotted-Drive Male-Female Round Thread Adapters

Inch-to-NPT Male-Female Hex Thread Adapters

Male-Female Round Universal
Thread Adapters with Through Hole

Connect male- and female-threaded parts of different thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through.

Inch-to-NPT Male-Female Hex
Thread Adapters with Through Hole

The through hole allows you to connect float rods to float valves.

Male Thread Adapters

Inch-to-Metric Male Hex Thread Adapters

One side inch, one side metric, and a hex in the middle—these handy fasteners connect two female-threaded parts, such as coupling nuts, adapting from inch threads to metric. Tighten with a standard wrench.

Inch-to-Metric Male Round Thread Adapters

Metric-to-Metric Male Round Thread Adapters

Inch-to-Inch Male Hex Thread Adapters

Need to join two female-threaded parts, such as coupling nuts, with dissimilar inch thread sizes? Attach them to these adapters and tighten the exterior hex nut for a secure connection.

Metric-to-Metric Male Hex Thread Adapters

Twist these adapters onto female metric threads to change pitch or switch thread sizes.

Inch-to-Inch Male Round Thread Adapters

Male Round Universal Thread
Adapters with Through Hole

Join two female-threaded parts of various thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through.

Left-Hand to Right-Hand Male Thread Adapters

Female Thread Adapters

Inch-to-Inch Female Hex Thread Adapters

Connect two differently sized male-threaded parts, such as threaded rods, and tighten with a standard wrench.

Inch-to-Metric Female Hex Thread Adapters

Adapt threaded rods from inch to metric. These adapters connect two male-threaded fasteners, so you can change the gender of a mating part or increase or decrease its thread size. The hex-shaped body fits into the head of a standard wrench.

Left-Hand to Right-Hand Female Hex Thread Adapters

Often called sleeve nuts, these thread adapters fasten parts with right-hand threads to parts with left-hand threads.

Metric-to-Metric Female Hex Thread Adapters

Increase or decrease metric thread size from one male-threaded part to another. Commonly used to connect two differently sized threaded rods, they have a hex-shaped body, so you can tighten them with a standard wrench.

Hollow Female Threaded Rods

Connect and separate threaded rods, studs, and other components. These hollow rods have internal threads on both ends, so you can make connections and still pass wiring and other objects through the center of the rod.

Drill Bushings

Press-Fit Drill Bushings

Finish-Your-Own Press-Fit Drill Bushings

Larger OD tolerances than standard press-fit bushings allow for finishing. Bushings should be machine ground.

Made-to-Order Press-Fit Drill Bushings

Choose the ID, OD, and length you need.

Metric Press-Fit Drill Bushings

Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.

Made-to-Order Metric Press-Fit Drill Bushings

Choose the ID, OD, and length you need.

Corrosion-Resistant Press-Fit Drill Bushings

These bushings are made of stainless steel, which provides excellent corrosion resistance.

Wear-Resistant Press-Fit Drill Bushings

Made of durable tungsten carbide, these bushings outlast steel.

Press-Fit Drill Bushings with Head

The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.

Metric Press-Fit Drill Bushings with Head

Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.

Made-to-Order Press-Fit Drill Bushings with Head

Choose the ID, OD, and length you need.

Made-to-Order Removable Drill Bushings

Choose the ID, OD, and length you need.

Removable Drill Bushings

Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves.

Secure-Hold Drill Bushings for Plastic

The knurls resist force and provide better holding strength than serrations. Encase in plastic tooling.

Drill Bushings for Plastic

The serrations grip to prevent rotation and spin out. Press or encase into plastic tooling.

Drill Bushings for Soft Metal and Wood

The serrations at the top of the bushing grip to prevent rotation and spin out.

Removable Drill Bushings for Thin Metal

Insert these bushings into a drilled hole and twist the lock ring to secure. Reusable and easy to replace, they are held in in place by a separate locking part.

Oil-Embedded Sleeve Bearings

Also known as Oilite® bearings.

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Panel-Mount Oil-Embedded Sleeve Bearings

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Vibration-Damping Oil-Embedded Sleeve Bearings

With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.

High-Load Ultra-Low-Friction
Oil-Embedded Sleeve Bearings

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. They’re sleeve bearings, so they handle loads parallel to the shaft.

Food Industry Oil-Embedded Sleeve Bearings

The oil in these bearings is suitable for incidental contact with food.

High-Load Food Industry
Oil-Embedded Sleeve Bearings

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.

Sleeve Bearings

Multipurpose Sleeve Bearings

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Multipurpose Sleeve Bearings with Groove

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Corrosion-Resistant Sleeve Bearings

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Corrosion-Resistant Sleeve Bearings with Groove

Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.

Dry-Running Sleeve Bearings

High-Temperature Dry-Running Sleeve Bearings

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

High-Load Dry-Running Sleeve Bearings

A metal shell adds strength.

Flanged Sleeve Bearings

Oil-Embedded Flanged Sleeve Bearings

Also known as Oilite® bearings.

High-Load Oil-Embedded Flanged Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Ultra-Low-Friction Oil-Embedded
Flanged Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

High-Load Food Industry Oil-Embedded
Flanged Sleeve Bearings

Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.

Food Industry Oil-Embedded Flanged Sleeve Bearings

The oil in these bearings is suitable for incidental contact with food.

Oil-Embedded Flanged Sleeve
Bearings with Certification

These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.

High-Load Ultra-Low-Friction
Oil-Embedded Flanged Sleeve Bearings

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

Multipurpose Flanged Sleeve Bearings

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Corrosion-Resistant Flanged Sleeve Bearings

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Multipurpose Flanged Sleeve Bearings with Certification

Furnished with a traceable lot number and material test report, these bronze bearings are strong, wear resistant, and excellent at handling shock loads.

High-Temperature Dry-Running
Flanged Sleeve Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

High-Load Dry-Running Flanged Sleeve Bearings

An aluminum shell adds strength.

Thrust Bearings

Oil-Embedded Thrust Bearings

Also known as Oilite® bearings.

Food Industry Oil-Embedded Thrust Bearings

The oil in these bearings is NSF registered H1 and FDA compliant for incidental contact with food.

Ultra-Low-Friction Oil-Embedded Thrust Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

High-Load Oil-Embedded Thrust Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

High-Load Ultra-Low-Friction
Oil-Embedded Thrust Bearings

Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.

High-Load Food Industry
Oil-Embedded Thrust Bearings

Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.

Corrosion-Resistant Thrust Bearings

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Multipurpose Thrust Bearings

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

High-Temperature Dry-Running Thrust Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Linear Bearings

High-Speed Linear Sleeve Bearings

A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible.

Ultra-Thin Linear Sleeve Bearings

Thinner than standard linear sleeve bearings, these bearings fit where clearance is a concern.

Linear Sleeve Bearings

Because they usually do not require lubrication, linear sleeve bearings outperform linear ball bearings in dirty environments.

Dust-Resistant Linear Sleeve Bearings

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

High-Speed Ultra-Thin Linear Sleeve Bearings

Use these ultra-thin sleeve bearings in high-speed applications where clearance is a concern.

Food Industry Linear Sleeve Bearings

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

Food Industry Linear Sleeve
Bearings for Support Rail Shafts

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

Linear Sleeve Bearings for Support Rail Shafts

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.

High-Speed Linear Sleeve
Bearings for Support Rail Shafts

These bearings have a ceramic liner to help them achieve high speeds as well as rapid acceleration and deceleration.

Building and Machinery Hardware

Two-Piece Standoff Panel-Hanging Brackets

Fit these brackets through drilled holes in panels.

Screw-Grip Standoff Panel-Hanging Brackets

No need to drill holes in panels—tighten the set screw to hold them in place.

Peg-Style Standoff Panel-Hanging Brackets

Use four brackets to support the top and bottom edges of panels without drilling holes in them.

Low-Profile Threaded Standoff Caps

A thin head means these caps sit nearly flush with your surface for a clean look.

Tamper-Resistant Threaded Standoff Caps

Pin holes on the side of these caps let you insert an installation tool for increased leverage when tightening, making them difficult to remove.

Shims for Keyway Broaches

When broaching in multiple passes, shims are necessary to ensure full keyway depth.

Dissolvable Shims

Use these paper shims to create a gap while welding, then spray them with water and they instantly melt away.

Corrosion-Inhibiting Washers for Battery Terminals

Stop corrosion caused by battery acid fumes leaking at the posts of battery terminals.

Washer-Style Tag Holders

Bolt these holders to a surface and then attach a tag to the small hole.

Fastener Kits for Enclosures

Mount components to your enclosure without worrying about leaks—these kits seal out water from washdowns, rain, and snow when used with enclosures rated NEMA 4X.

Thread Adapters for Drum Openings

Convert drum openings with metric or BSPP threads to a 2 NPT pipe size.

Parts for Carbide Insert Holders

Replace clamps, screws, seats, and slotted pins in carbide insert holders.