Clip these little flashlights to a baseball cap or a surface to light up your work. They cast a flood beam with a uniform spread of light that’s ideal for close-up tasks.

Styles A-D can clip onto the brim of a hat. These flashlights are also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A come with an elastic band, so you can wear them as a headlamp.

On flashlights with color options, the green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions. The red beam lets you see in low light without disrupting your night vision.

IP04- and IP54-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity.

Rated IP07, you can drop these penlights in water and they’ll still work. Plus, they’re small enough to fit in your pocket. They cast a spot beam with a bright center for long-distance illumination. These penlights are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A have a lockout setting so they don’t get turned on by accident.

Style B have a knurled grip that won’t slip out of your hand. If you need these penlights to work right away and can’t wait for a charge, they’ll run on two AAA disposable batteries, too.

Because these flashlights are buoyant, they're easy to recover when dropped in the water. All have a long-lasting, built-in LED that is more efficient and generates less heat than other light technologies. These flashlights cast a spot beam that has a bright center for long-distance illumination. They are rated IP04 to withstand liquid from all directions. These flashlights meet ANSI/Plato FL 1, so they've been tested for impact resistance, run time, and beam distance.

Keep your hands free by wearing a flashlight on your head. These headlamps have long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. An included strap secures the lamp to your head and adjusts for a comfortable fit.

Headlamps with a uniform beam are especially good for close-up tasks and inspection work. Headlamps with a bull's eye beam have a bright center that can reach long distances.

IP54 rated headlamps protect against dust and liquid splashed from all angles.

Headlamps that cannot be sold to Canada are restricted by local energy efficiency requirements.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap. A strong magnet connects the light to the attachments, so swap between them in a snap. When you need close-up illumination, detach the light and hold it as a task light.

Rated IP54, these headlamps are sealed against dust and splashing liquids. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as brightness, battery life, and beam distance. On the high beam, these lamps will illuminate the length of a football field.

Twist the head to adjust from a narrow spotlight to a wide floodlight. These headlamps are rechargeable and include a spare rechargeable battery. If you aren’t near an outlet or you can’t wait for a recharge, they’ll also run on three disposable AAA batteries.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B have lights all around the head band for 360° visibility. You can turn the front and band light on separately or simultaneously. Battery life is measured when all lights are on. They include a rubber strap you can wrap around a hard hat—no hard hat clips required. These headlamps are rated for temporary submersion in water.

Style A have a memory function that defaults to your preferred light combination when you first turn them on.

Style B headlamps will last a full shift. Quickly swap out their disposable batteries—no need to wait for a charge. Their reflective band keeps you visible to vehicles even when the light is turned off.

Style C are a lower cost alternative that has a red light in back so people can see you when it is dark. However, they don’t have lights all around the head band. The front light has a dial to dim the light anywhere from high to low for precise lighting control. They are a good choice for wearing on your head rather than on a hard hat. Rated IP54, they’re sealed against dust and splashing water.

Headlamps with a spot beam have a bright center for lighting up long distances. Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision. The green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions.

Bring light to areas that don't have electrical power service. These lights have an impact-resistant plastic lens to protect their LEDs. No need to swap out disposable batteries—just charge these flashlights up and they’re ready to go.

Style A have a swiveling hook and magnetic back for flexible mounting options. You can fold away the hook when not in use. They cast a neutral light that’s often found in workspaces.

Aim light where it’s needed most in areas that don't have an electrical outlet.

Lights with rechargeable batteries include a USB charging cord.

Style A swivel like a joystick to aim light. They also have a magnet on the back, so you can pop them on most metal surfaces.

Style B have a large head to cast even light with minimal glare and shadows. You can pivot the head up and down and rotate the head side to side to aim light. The stand has magnets for attaching these lights to most metal surfaces. A swivel hook unfolds from the back of the lights, so you can hang them.

Style C have a light on the end, so they can be used as a flashlight. Use the flashlight when you need a narrow beam and unfold the head to cast light widely. For hands-free use, they have a magnet and a hook on the base.

Style D show the most accurate colors possible with LEDs, helping you to distinguish similar hues. Use them where color identification is critical, such as paint inspection and wiring. Unfold the head and twist it side to side to aim light. These lights turn on as soon as you unfold the head. A battery indicator shows you how much charge you have left.

Lights with daylight light appearance produce white and blue tones, mimicking natural daylight, for a crisp, clear light that’s ideal for inspecting. Lights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you’re working. With a swivel hook and a magnet, you can attach them where convenient and aim light on your task. IP rated, they’re sealed to keep water from working its way in and causing failure. Their light mimics natural daylight to give you a crisp, clear light that’s good for inspecting.

Style C and D have a magnet on the kickstand. You can attach them to a metal surface and adjust the angle of the light. Fold the hook into the back when you’re not using it. Style D can shine like a flashlight when you need to peer into narrow spaces.

Style E have a magnet embedded in the hook. Since the hook folds, you can use it to tilt the light toward your task. Use the light on the end as a flashlight when all you need is a narrow beam. A battery life indicator lets you know when it’s time to charge these lights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it. They have a magnetic base to attach to most metal surfaces and can also be used as freestanding lights. You won’t be tethered to an outlet or extension cord, since they use battery power. A battery life indicator tells you how much charge you have left. Even while charging, you can still use the light, so your job isn’t on hold. Fold the head down to take up less storage space.

IP rated, these lights are sealed to keep out humidity and dripping and splashing liquids. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A are also IP rated for dust, so you can use them when sanding, grinding, and in other messy applications. They have a USB charger port for powering other things such as phones and earbuds. Style A with a hook can also be hung.

Provide 360° of lighting with these lanterns. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

Rechargeable Style A lanterns have a spot for 3 AA backup batteries as well. When the charge is under 10%, they’ll switch to the backup batteries to preserve runtime. You can lock these lanterns out to prevent accidental activation. Charge your phone and other devices with the USB port.

Style B have a light on the base, so they work as a flashlight too. You can even use them in place of a road flare—they have a flashing hazard light. Charge your phone and other devices with the USB power bank.

IP04-rated lanterns keep out dripping, splashing, and falling liquids, as well as humidity.

Lanterns that meet ANSI/PLATO FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Brighten remote areas, even if they’re damp or rainy. These floodlights are IP rated to keep out humidity and dripping, splashing, and falling liquids. Lightweight, you can move them elsewhere at a moment’s notice.

Style A can be hung or propped up like a picture frame with their handle. Adjust from a focused spot beam to a wide flood beam by twisting the light head. Rated IP54, these floodlights also seal out dusty conditions. Their high-capacity battery lets you plug your phone or other device in to charge while you’re working. And when you plug these lights in to charge, they’ll still produce light. The battery life indicator will let you know when to recharge.

Floodlights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface. They come with a butt connector and 5" or 6" connecting cable for attaching additional lights. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. All can produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Lights with adjustable light appearance have a switch for choosing between neutral and warm light, as well as cool light. Neutral light is good for a balanced work environment. Warm light highlights yellow tones, which is good for ambiance.

Add connecting cables in other lengths to suit your application.