Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

Light up large, open rooms where you need a quick setup and takedown, such as a room under construction. Just hang these lights from a ceiling up to 30' high and they’re ready to go.

Aim light where it's needed most in areas that don't have an electrical outlet.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery to light up work where there’s no outlet.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it.

Use these with portable lights that use screw-in bulbs.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit.

Compact and easy to carry, these ETL listed lights stand up to dripping, splashing, and falling liquids. The head adjusts up and down to direct light where it's needed.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.

Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it.

As bright as stadium lights, these floodlights are the most powerful in our offering—they’ll brighten jobsites half the size of a football field. They run on a diesel generator you can use to power other lights and tools in the field.

These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.

Mount lights in recessed spaces so the lens is flush with the wall.

No need for wiring—these lights plug-in with a two-prong plug. Also known as shop lights.

Don’t waste energy lighting unoccupied spaces--these lights turn on when they detect movement. Set them to turn off after 30 or 180 seconds.

Also known as turret lights, these fixtures have downlight reflectors to direct light.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Also known as troffers, these lights fit most standard drop-ceiling grids.

These lights mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

Connect the hooks to a fixture to suspend lights from the ceiling.

A sealed lens keeps moisture out to protect these lights against washdowns.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

Create a high-intensity lighting system for inspecting small and microscopic parts.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Also known as wall packs, these lights mount to exterior walls and ceilings.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Heads adjust to any angle so you can direct light where needed.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

If the power goes out, you’ll find these flashlights right away.

Always have a flashlight on hand—these attach to a key ring.

The handle opens into a tripod, so you can shine light on your work while keeping your hands free.

Small enough to fit in your pocket.

Light up objects more than a quarter of a mile away. These flashlights are also known as searchlights.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.

All of these flashlights stand up to wet environments.

Free your hands for other work by mounting a flashlight to a nearby surface.

Securely store your flashlight when not in use.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.

Illuminate small spaces and mark locations with these reusable lightsticks.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you.

Turn a mini flashlight into a headlamp with these straps.

Clip these headlamps right into a mount on your tactical or rescue helmet.

A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces.

Suspend these lights overhead or mount them above your workspace.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

Rated for use in damp locations, these lights withstand humidity and moisture.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.

Rated NEMA 4X, these lights are protected from corrosion and washdowns.

The open design of these guards allows heat to dissipate from screw-in light bulbs.

Illuminate signs and keyboards with a thin panel that’s backlit by a circuit board of LED chips.

A sealing gasket keeps out oil and other contaminants.

Attach this light to the neck of your welding torch to illuminate the weld area.