A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.

The neoprene coating on this hose withstands continuous motion without weakening.

Don’t worry about crushing this hose if you step on it—it has a flexible plastic spiral that springs back to its original shape.

Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.

Position this hose in any direction and it will hold its shape.

SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.

The strongest rubber duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.

A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.

Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.

A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.

Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.

In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.

This white hose makes dirt and other contaminants easy to spot.

The small bend radius makes this hose easy to wrap around corners and install in tight spaces.

Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.

Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.

Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.

Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.

With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.

Form elbows and bends with this hose and it will hold its shape without support.

Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.

Step on or drive over this hose without causing damage.

A smooth interior allows for unrestricted flow and makes this hose easy to clean.

Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.

A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.

The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.

A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.

An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.

Bend this hose into position in heating and cooling applications where it’s important to maintain the temperature of the air inside the hose.

Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.

Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.

Safely suction, transfer, and dispense drinking water.

Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.

If you need to access your line frequently, the fittings on this hose connect and disconnect quickly.

Transport milk, syrup, meat, and other wet food and beverages through your line.

Move milk, syrup, meat, and other wet-food and drink products through lines connected by cam-and-groove fittings.

Transport wet food and drink at high pressures with a hose connected by sanitary fittings.

Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.

With a tough EPDM cover, this hose won’t wear down from rubbing or scraping, crack from ozone, or degrade from UV light. It has flanged ends that join with quick-clamp fittings, so you can easily access lines that carry milk, syrup, meat, and other wet food and drinks.

For easy access to lines that handle oily and fatty foods and beverages, this hose has flanged ends that join with quick-clamp fittings.

Move flour, grain, rice, sugar, and other dry food through your line.

Connect to high-vacuum pumps to route exhaust fumes out of your work area. Also known as roughing hose.

More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.

Not only can this hose withstand high temperatures, it won't collapse in low-vacuum applications. It's also known as radiator hose.

Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.

Hose is polyurethane so it stretches and flexes more than nylon retracting hose.

Supply air to two power tools without worrying about your lines getting tangled.

Made of polyurethane, this hose stands up to the wear and tear of daily use.

Step on this hose and it springs back to its original shape.

Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.

Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

Attach push-on barbed fittings to this hose for use in low-pressure hydraulic applications. No clamps are needed to secure fittings to the hose; the more you pull on the fittings, the tighter the hose will grip.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose.

Made of nylon with a polyurethane cover, this hose is half the weight but 240 times better at resisting wear and tear than our standard rubber hydraulic hose. The male threaded fittings come already attached to save you time.

Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system.

Transfer fluid between pumps, cylinders, and other parts of your hydraulic system.

The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. It comes with female threaded fittings already attached, saving you time.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.