About Backflow-Prevention Valves
More
How to Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
High-Cycling Check Valves
With internal components that resist wear from frequent operation, these valves can cycle as often as once per second. Barbed fittings and unthreaded fittings grip onto tubing, providing a secure hold. All valves open to allow flow in one direction and close when flow stops or reverses.
Nylon valves are more impact resistant than polypropylene valves.
Polypropylene valves are more corrosion resistant than nylon valves.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Water
- Diaphragm Material: See table
- Seal Material: See table
| For Tube ID | Max. Pressure | Min. Opening Pressure, psi | Temperature Range, °F | Diaphragm Material | Seal Material | Color | End-to-End Lg. | Each | |
Unthreaded Male Inlet × Unthreaded Male Outlet | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 15 psi @ 70° F | 0.5 | -20° to 250° | Fluorosilicone Rubber | Fluorosilicone Rubber | Black | 1 5/8" | 00000000 | 00000 |
- For Use With: Air, Water
- Diaphragm Material: See table
- Seal Material: See table
| For Tube ID | Max. Pressure | Min. Opening Pressure, psi | Temperature Range, °F | Diaphragm Material | Seal Material | Color | End-to-End Lg. | Each | |
Unthreaded Male Inlet × Unthreaded Male Outlet | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 15 psi @ 70° F | 0.5 | -20° to 250° | Fluoroelastomer Rubber | Fluoroelastomer Rubber | White | 1 5/8" | 00000000 | 00000 |
| 1/8" | 15 psi @ 70° F | 0.5 | -20° to 250° | Fluorosilicone Rubber | Fluorosilicone Rubber | Black | 1 5/8" | 000000000 | 00000 |
Press-In Flow-Control Orifices
- For Use With: Air, Argon, Carbon Dioxide, Helium, Neon, Nitrogen, Oil, Water, Xenon
- Max. Pressure: 4,000 psi @ 70° F
Press these orifices into machined holes in connectors, manifolds, and other custom parts. They’re also known as flow restrictors and precision orifice valves. Use them to throttle, vent, bleed, or regulate the flow of water, oil, and inert gas.
For technical drawings and 3-D models, click on a part number.
Available Orifice Diameters | ||
|---|---|---|
| Orifice Dia. | Water Flow | Air Flow |
| 0.01" | 0.016 gpm @ 40 psi | 4.7 scfh @ 40 psi |
| 0.018" | 0.046 gpm @ 40 psi | 13.2 scfh @ 40 psi |
| 0.021" | 0.061 gpm @ 40 psi | 17.8 scfh @ 40 psi |
| 0.025" | 0.089 gpm @ 40 psi | 27.5 scfh @ 40 psi |
| 0.029" | 0.12 gpm @ 40 psi | 37.1 scfh @ 40 psi |
| 0.035" | 0.177 gpm @ 40 psi | 52.5 scfh @ 40 psi |
| 0.042" | 0.247 gpm @ 40 psi | 76.9 scfh @ 40 psi |
| 0.055" | 0.43 gpm @ 40 psi | 132 scfh @ 40 psi |
| Lg. | OD | For Hole Dia. | Each | |
303 Stainless Steel Body  | ||||
|---|---|---|---|---|
| 1/8" | 1/4" | 0.257" | 0000000 | 000000 |