About Flow-Adjustment Valves
More
About Actuated On/Off Valves
More
About Gradual On/Off Valves
More
About Pressure-Relief Valves
More
About On/Off Valves
More
Threaded On/Off Valves for Cryogenic Liquids
- Valve Type: Ball
- For Use With: Liquid Argon, Liquid Carbon Dioxide, Liquid Nitrogen
- Seal Material: Graphite
- Specifications Met: American Petroleum Institute Standard 607 - Edition 7
Use these valves in cryogenic systems to control the flow of liquid nitrogen, carbon dioxide, and argon. They have PCTFE seats that maintain a tight seal at temperatures as low as -400° F. A vented ball relieves pressure build-up from frequent temperature fluctuations during use. These valves have an extra-long stem filled with graphite packing to prevent heat transfer and leaks. The stem is long enough to fit through thick insulation in your setup. It keeps the handle at a comfortable temperature and your hands away from hazards, so you can start and stop flow in hard-to-reach areas. Their lockable handle can be fixed in place using a padlock (not included). To maintain performance and safety, these valves are shipped cleaned and bagged to avoid contamination. All are full port, so they do not restrict flow.
Fire-tested to meet American Petroleum Institute (API) 607, these valves securely isolate flammable gases such as methane and hydrogen to prevent the spread of fire.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size  | Flow Coefficient (Cv) | Max. Pressure | Min. Temp., °F | End-to-End Lg. | For Insulation Thick. | For Max. Shackle Dia. | Features | Each | |
316 Stainless Steel Body with Lever Handle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||||
| 1/4 | 8 | 1,440 psi @ 100° F | -400° | 2 15/16" | 10 11/16" | 5/16" | Vented Ball | 0000000 | 0000000 |
| 1/2 | 12 | 1,440 psi @ 100° F | -400° | 3 1/16" | 10 3/4" | 5/16" | Vented Ball | 0000000 | 000000 |
| 3/4 | 32 | 1,440 psi @ 100° F | -400° | 3 3/4" | 10 7/8" | 5/16" | Vented Ball | 0000000 | 00000000 |
| 1 | 46 | 1,440 psi @ 100° F | -400° | 4 1/4" | 10 13/16" | 5/16" | Vented Ball | 0000000 | 00000000 |
316 Stainless Steel Body with T-Handle | |||||||||
NPT Female × NPT Female | |||||||||
| 2 | 240 | 1,440 psi @ 100° F | -400° | 6 3/8" | 11 7/8" | 3/8" | Vented Ball | 0000000 | 00000000 |
Socket-Connect On/Off Valves for Cryogenic Liquids
- Valve Type: Ball
- For Use With: Liquid Argon, Liquid Carbon Dioxide, Liquid Nitrogen
- Seal Material: Graphite
- Specifications Met: American Petroleum Institute Standard 607 - Edition 7
Designed to withstand extremely cold liquid gases, these valves are ideal for liquid nitrogen cooling systems and liquified gas storage. They have PCTFE seats that maintain a tight seal at temperatures as low as -400° F. A vented ball relieves internal gas and pressure build-up from frequent temperature fluctuations during use. These valves have an insulated, extra-long stem to prevent heat transfer and leaks. The extended stem keeps the handle at a comfortable temperature and your hands away from hazards, so you can start and stop flow even in hard-to-reach areas. To maintain performance and safety, these valves are shipped cleaned and bagged to avoid contamination.
Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection. All are full port, so they do not restrict flow. To prevent changes, add a padlock to fix the handle in place.
Fire-tested to meet American Petroleum Institute (API) 607, these valves securely isolate flammable substances to prevent the spread of fire.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | For Pipe Schedule | Flow Coefficient (Cv) | Max. Pressure | Min. Temperature, °F | End-to-End Lg. | For Insulation Thick. | For Max. Shackle Dia. | Features | Each | |
316 Stainless Steel Body | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Socket Connect × Socket Connect | ||||||||||
| 3/4 | Any | 32 | 1440 psi @ 100° F | -400° | 3 3/4" | 10 7/8" | 5/16" | Vented Ball | 0000000 | 000000000 |
| 1 | Any | 46 | 1440 psi @ 100° F | -400° | 4 1/4" | 10 13/16" | 5/16" | Vented Ball | 0000000 | 00000000 |
| 2 | Any | 240 | 1440 psi @ 100° F | -400° | 6 5/16" | 11 7/8" | 3/8" | Vented Ball | 0000000 | 00000000 |
Threaded Gradual On/Off Valves for Cryogenic Liquid
- Valve Type: Gate
- For Use With: Liquid Argon, Liquid Carbon Dioxide, Liquid Natural Gas, Liquid Methane, Liquid Nitrogen, Liquid Oxygen
- Packing Material: PTFE Plastic
- Specifications Met: ASME B31.3, CGA G-4.1, MSS-SP-80
Built to handle the extreme cold of liquid gases, these bronze valves are ideal for liquid carbon dioxide carbonation systems, liquid nitrogen coolant systems, and other cryogenic applications. They’ll also work with liquified natural gas and liquid oxygen. They’re cleaned and bagged to meet CGA G-4.1 for oxygen service. Also known as gate valves, they open and close gradually with multiple turns of the wheel handle to prevent sudden starts and stops.
The handle raises as these valves open and lowers as they close. At a glance, you can see if flow is on or off. The stem is isolated from what’s flowing through your line, giving these valves a longer lifespan than valves with a nonrising stem. They have a threaded union stem housing, so you can separate the stem from the housing while the valve is inline. That means you can complete maintenance tasks, such as packing the stem, without taking apart your whole setup.
For technical drawings and 3-D models, click on a part number.
O'all | Stem | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | End-to-End Lg. | Ht. | Lg. | Type | Housing Connection Style | Each | |
NPT Female | ||||||||||
Wheel Handle—Bronze Body and Brass Gate | ||||||||||
| 1/2 | 19.8 | 600 psi @ 72° F | -320° to 150° | 2 5/16" | 10 3/16" | 2 5/16" | Rising | Threaded Union | 0000000 | 0000000 |
| 3/4 | 36 | 600 psi @ 72° F | -320° to 150° | 2 1/2" | 11 5/16" | 2 1/2" | Rising | Threaded Union | 0000000 | 000000 |
| 1 | 60 | 600 psi @ 72° F | -320° to 150° | 2 7/8" | 13 1/2" | 2 7/8" | Rising | Threaded Union | 0000000 | 000000 |
| 1 1/2 | 152 | 600 psi @ 72° F | -320° to 150° | 3 7/16" | 18 3/8" | 3 7/16" | Rising | Threaded Union | 0000000 | 00000000 |
| 2 | 245 | 600 psi @ 72° F | -320° to 150° | 3 13/16" | 21 5/16" | 3 13/16" | Rising | Threaded Union | 0000000 | 00000000 |
Solenoid On/Off Valves for Cryogenic Liquids
Built to withstand the extreme cold of liquid nitrogen and liquid oxygen, these valves are cleaned and bagged for high-purity applications. They operate on electricity to automatically start and stop flow.
All valves are normally closed unless actuated. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
304 stainless steel valves are more corrosion resistant than brass and bronze valves.
Zero pressure drop valves don’t require a minimum pressure drop between the inlet and outlet for operation. Pressure drop assisted valves require a minimum pressure drop between the inlet and the outlet for operation; the upstream pressure must be greater than the downstream pressure.
NEMA 2 valves resist light splashing water and dust, and their enclosures are rated IP50 for additional protection from dust. Valves rated NEMA 4 and IP65 resist dust, splashing water, and washdowns.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- For Use With: Liquid Argon, Liquid Nitrogen, Liquid Oxygen
- Seal Material: PTFE Plastic
| Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Environmental Rating | Each | |
Normally Closed—120V AC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4 | Female | NPT | 0.7 | 120 psi @ 70° F | Zero Pressure Drop | -320° to 355° | 1 3/4" | 3 1/8" | IP50, NEMA 2 | 00000000 | 0000000 |
| 3/8 | Female | NPT | 3.5 | 125 psi @ 70° F | Pressure Drop Assisted | -320° to 355° | 2 1/2" | 4 7/8" | IP50, NEMA 2 | 00000000 | 000000 |
- For Use With: Liquid Argon, Liquid Nitrogen, Liquid Oxygen
- Seal Material: Glass-Filled PTFE Plastic
| Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Each | |
Normally Closed—24V AC | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | Female | NPT | 3.5 | 110 psi @ -350° F | Zero Pressure Drop | -350° to 400° | 3 1/4" | 7" | 0000000 | 0000000 |
| 3/4 | Female | NPT | 7.5 | 110 psi @ -350° F | Zero Pressure Drop | -350° to 400° | 3 1/2" | 7 1/8" | 0000000 | 000000 |
| 1 | Female | NPT | 13 | 110 psi @ -350° F | Zero Pressure Drop | -350° to 400° | 4 1/8" | 8" | 0000000 | 000000 |
Normally Closed—24V DC | ||||||||||
| 1/2 | Female | NPT | 3.5 | 110 psi @ -350° F | Zero Pressure Drop | -350° to 400° | 3 1/4" | 7" | 0000000 | 000000 |
| 1 | Female | NPT | 13 | 110 psi @ -350° F | Zero Pressure Drop | -350° to 400° | 4 1/8" | 8" | 0000000 | 000000 |
Normally Closed—120V AC | ||||||||||
| 1/2 | Female | NPT | 3.5 | 110 psi @ -350° F | Zero Pressure Drop | -350° to 400° | 3 1/4" | 7 1/16" | 0000000 | 000000 |
| 1/2 | Female | NPT | 3.5 | 200 psi @ -350° F | Zero Pressure Drop | -350° to 400° | 3 1/4" | 7 1/16" | 0000000 | 000000 |
| 3/4 | Female | NPT | 7.5 | 110 psi @ -350° F | Zero Pressure Drop | -350° to 400° | 3 1/2" | 7 3/8" | 0000000 | 000000 |
| 1 | Female | NPT | 13 | 110 psi @ -350° F | Zero Pressure Drop | -350° to 400° | 4 1/8" | 8 1/8" | 0000000 | 000000 |
- For Use With: Liquid Nitrogen, Liquid Oxygen
- Seal Material: PTFE Plastic
| Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Dia. | O'all Ht. | Environmental Rating | Each | |
Normally Closed—120V AC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4 | Female | NPT | 0.9 | 225 psi @ 120° F | Pressure Drop Assisted | -320° to 120° | 1 11/16" | 4 13/16" | IP65, NEMA 4 | 0000000 | 0000000 |
| 3/8 | Female | NPT | 1.9 | 225 psi @ 120° F | Pressure Drop Assisted | -320° to 120° | 1 11/16" | 4 13/16" | IP65, NEMA 4 | 0000000 | 000000 |
| 1/2 | Female | NPT | 2.8 | 225 psi @ 120° F | Pressure Drop Assisted | -320° to 120° | 1 11/16" | 5 1/4" | IP65, NEMA 4 | 0000000 | 000000 |
Threaded Flow-Adjustment Valves for Cryogenic Liquid
- Valve Type: Globe
- For Use With: Liquid Argon, Liquid Carbon Dioxide, Liquid Nitrogen
- Seal Material: Glass-Filled PTFE Plastic
- Specifications Met: CGA G-4.1
Designed to withstand the extreme cold of liquid argon, liquid carbon dioxide, and liquid nitrogen, these valves are cleaned and bagged to meet CGA G-4.1 standards for oxygen service. They gradually open and close with multiple turns of the wheel handle to adjust and regulate flow. All have a rising stem that lifts as the valve opens and lowers as the valve closes to provide a visual indication of whether flow is on or off.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Overall Ht. | Stem Type | Each | |
Bronze Body | ||||||||
|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||||
| 1/2 | 3.3 | 600 psi @ 150° F | -325° to 150° | 2 5/8" | 8 5/16" | Rising | 00000000 | 0000000 |
| 3/4 | 6.3 | 400 psi @ 150° F | -325° to 150° | 3 3/16" | 10" | Rising | 00000000 | 000000 |
| 1 | 10 | 600 psi @ 150° F | -325° to 150° | 3 3/4" | 11 13/16" | Rising | 00000000 | 000000 |
| 1 1/2 | 26 | 400 psi @ 150° F | -325° to 150° | 4 3/4" | 16 1/2" | Rising | 00000000 | 000000 |
| 2 | 45 | 600 psi @ 150° F | -325° to 150° | 5 3/4" | 16 3/4" | Rising | 00000000 | 00000000 |
Stainless Steel Body | ||||||||
NPT Female × NPT Female | ||||||||
| 1/2 | 5 | 720 psi @ 150° F | -325° to 150° | 3 1/16" | 11 13/16" | Rising | 00000000 | 000000 |
| 1 | 14 | 720 psi @ 150° F | -325° to 150° | 3 15/16" | 12 1/16" | Rising | 00000000 | 000000 |
| 1 1/2 | 53 | 720 psi @ 150° F | -325° to 150° | 5" | 12 5/16" | Rising | 00000000 | 000000 |
| 2 | 28.3 | 720 psi @ 150° F | -325° to 150° | 5 15/16" | 12 5/8" | Rising | 00000000 | 00000000 |
Compact Threaded Flow-Adjustment Valves for Cryogenic Liquid
- Valve Type: Globe
- For Use With: Liquid Argon, Liquid Carbon Dioxide, Liquid Nitrogen
- Specifications Met: CGA G-4.1
Often used with portable cryogenic cylinders, these valves are a third of the height of other valves for cryogenic liquid. They are designed to withstand the extreme cold of liquid argon, liquid carbon dioxide, and liquid nitrogen; all are cleaned and bagged to meet CGA G-4.1 standards for oxygen service. These valves gradually open and close with multiple turns of the wheel handle to adjust and regulate flow. They have a nonrising stem that stays in the same position whether the valve is open or closed.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Stem Type | Each | |
Brass Body | |||||||
|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
| 1/4 | 1 | 600 psi @ 165° F | -320° to 165° | 2 1/2" | Nonrising | 00000000 | 0000000 |
| 3/8 | 1.8 | 600 psi @ 165° F | -320° to 165° | 2 1/2" | Nonrising | 00000000 | 000000 |
| 1/2 | 1.8 | 600 psi @ 165° F | -320° to 165° | 2 1/2" | Nonrising | 00000000 | 000000 |
Extended-Life Pressure-Regulating Valves for Cryogenic Liquids
- For Use With: Liquid Argon, Liquid Carbon Dioxide, Liquid Nitrogen, Liquid Oxygen
- Temperature Range: -320° to 150° F
For a longer service life than standard valves for cryogenic liquids, these have a durable bronze body. All are cleaned and bagged for oxygen service and other high-purity applications. They automatically reduce a high, variable inlet pressure to a lower, stable outlet pressure. Adjust the outlet pressure within the range. Valves are designed to withstand the extreme cold of liquid argon, liquid carbon dioxide, liquid nitrogen, and liquid oxygen. They have an internal strainer to trap debris.
For technical drawings and 3-D models, click on a part number.
Pressure-Regulating Valves for Cryogenic Liquids
- For Use With: Liquid Argon, Liquid Carbon Dioxide, Liquid Nitrogen, Liquid Oxygen
- Temperature Range: -320° to 150° F
These valves can withstand the extreme cold of liquid argon, liquid carbon dioxide, liquid nitrogen, and liquid oxygen. All are cleaned and bagged for oxygen service and other high-purity applications. They automatically reduce a high, variable inlet pressure to a lower, stable outlet pressure. Adjust the outlet pressure within the range.
For technical drawings and 3-D models, click on a part number.
Fast-Acting Pressure-Relief Valves for Cryogenic Liquids
- For Use With: Liquid Argon, Liquid Nitrogen, Liquid Oxygen
- Temperature Range: -320° to 350° F
Cleaned and bagged for oxygen service and other high-purity applications, these valves can withstand the extreme cold of liquid argon, liquid nitrogen, and liquid oxygen. They spring fully open at the set pressure and remain open until the system pressure is restored below the set pressure. All have a vented relief port to exhaust discharge directly.
For technical drawings and 3-D models, click on a part number.
Pressure-Relief Valves for Cryogenic Applications
- For Use With: Liquid Carbon Dioxide, Liquid Nitrogen, Liquid Oxygen
- Temperature Range: -320° to 165° F
Cleaned and bagged to meet CGA G-4.1 for oxygen service and other high-purity applications, these valves are built to withstand the extreme cold of liquid carbon dioxide, liquid nitrogen, and liquid oxygen. They begin opening at the set pressure and fully open at about 10% over the set pressure. Valves begin closing as pressure drops and fully close when the system pressure is restored below the set pressure. Set pressure is not adjustable.
Valves are not intended for direct contact with cryogenic liquids. Risers (sold separately) are required to convert cryogenic liquids into gases before they contact the valve. 3/8 NPT valve requires a 1/2 NPT × 3/8 NPT bushing when using a riser.
Adapters (sold separately) convert the valve relief-port connection from UNEF female threads to NPT female threads.
For technical drawings and 3-D models, click on a part number.
Valves | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Relief Port | Risers | Adapters | |||||||||
| Pipe Size | Location | Maximum Pressure, psi | Thread Size | Location | Overall Ht. | Choose a Set Pressure, psi | Each | Each | Each | |||
NPT Male Inlet and UNEF Female Relief Port | ||||||||||||
Brass Body | ||||||||||||
| 1/4 | Bottom | 600 | 3/4"-20 | Top | 2 5/8" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | |
| 3/8 | Bottom | 600 | 3/4"-20 | Top | 2 5/8" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | |
| 1/2 | Bottom | 600 | 3/4"-20 | Top | 2 13/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | |