Valves for Mineral Oil | McMaster-Carr

Filter by

Tube OD

Fitting Connection

For Use With

Acetic Acid (White Vinegar)

Acetic Acid (White Vinegar) (20% Concentration)

Argon/Carbon Dioxide Blend

Citric Acid (25% Concentration)

Citric Acid (50% Concentration)

Citric Acid (100% Concentration)

Hydraulic Fluid (Petroleum Based)

Hydraulic Oil

Hydrochloric Acid

Hydrochloric Acid (37% Concentration)

Hydrogen

Hydrogen Peroxide (30% Concentration)

Liquid Carbon Dioxide

Methanol (Methyl Alcohol)

Methyl Ethyl Ketone (MEK)

Nitric Acid (20% Concentration)

Nitric Acid (25% Concentration)

Nitric Acid (50% Concentration)

Nitric Acid (100% Concentration)

Phosphoric Acid (70% Concentration)

Sodium Carbonate (Soda Ash)

Sodium Hydroxide (Caustic Soda)

Sodium Hydroxide (Caustic Soda) (20% Concentration)

Sodium Hydroxide (Caustic Soda) (25% Concentration)

Sodium Hydroxide (Caustic Soda) (50% Concentration)

Sodium Hydroxide (Caustic Soda) (75% Concentration)

Sodium Hydroxide (Caustic Soda) (100% Concentration)

Sodium Hypochlorite (Bleach)

Sulfuric Acid (75% Concentration)

Synthetic Oil

Toluene (Methylbenzene)

Actuation

Body Material

Actuation Mechanism

Actuation Type

Pipe Size

Valve Type

Environment

Shape

Actuator Housing Material

Actuator Diameter

Material

Maximum Pressure @ Temperature

Thread Type

UN/UNF (SAE Straight)

Valve Function

Connects To

Valve Position

Air Connection

System of Measurement

Inch

Metric

Pilot Valve Included

RoHS

Compliant

Compliant with Exemptions

Not Compliant

Export Control Classification Number (ECCN)

REACH

DFARS Specialty Metals

Exempt

Forward

How can we improve?

170 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

Sanitary Air-Driven On/Off Valves

Use air pressure to automatically control the flow of liquids in sanitary environments, such as food and beverage processing plants.

Barbed Flow-Control Orifices

Insert the barbed ends of these orifices into rubber and soft plastic tubing, and secure them with a clamp.

Hose and Hose Fittings

International Standard ISO Minimal-Spill
Quick-Disconnect Hose Couplings for Chemicals

To minimize fluid loss when connecting and disconnecting your line, these couplings have flat faces for a close fit and shut-off valves to stop the flow—they meet ISO 16028, which is an international standard for hose couplings.

Minimal-Spill Push-and-Turn
Hose Couplings for Chemicals

Quickly connect and disconnect hose lines used with a variety of chemicals, from adhesives to isopropyl alcohol and ink. Any part of these couplings that contacts fluid is made from 316 stainless steel, C-276 Hastelloy, PTFE, or fluoroelastomer to withstand the chemicals in your line.

Minimal-Spill Push-and-Turn
Hose Couplings for Petroleum

Also known as dry disconnects and double shut-off couplings, these couplings make connecting and disconnecting your line quick and virtually spill-free. Built to stand up to petroleum products, such as diesel fuel and gasoline, their body and gasket are made from materials that won’t corrode from oil.

Breakaway Hose Couplings
for Chemicals and Petroleum

Minimize chemical and petroleum spills during accidental disconnects, such as a driver pulling away during loading. These couplings have a shut-off valve on each half to stop flow when they’re separated.

Chemical Hose Nozzles with
Hose and Threaded Fittings

Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC).

Pipe and Pipe Fittings

Right-Angle Flow Rectangular Manifolds

Distribute air or fluid to multiple locations from a single supply source with these manifolds. They are also known as headers.

Straight-Flow Rectangular Manifolds

Unlike other manifolds, which have an inlet on either end, these have one inlet on the opposite side from the outlets. This design allows air or fluid to follow a straight path, improving flow through your system. Also known as headers.

Low-Profile Square Manifolds

With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air or fluid to three locations from a single supply source.

Low-Profile Hex Manifolds

When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air or fluid to five locations from a single supply source.

Round Manifolds for Hose Lines

Mount these manifolds on the end of a hose line to distribute air, water, or hydraulic fluid to three locations from a single supply source.

Straight-Flow Junction Blocks

Use these junction blocks to organize and separate multiple lines in your system. They have threaded holes that allow air or fluid to flow straight through the block.