We will reply to your message within an hour.
Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks.
Shield outdoor pipe and tank openings from the environment. Also known as vent caps, these breather vents have screens to allow air flow while blocking debris.
These breather vents withstand corrosion in damp environments.
These breather vents are rated NEMA 6 to withstand periodic submersion in water.
Secure access to vented openings in pipe and tanks—the cap can be locked to prevent tampering.
Minimize moisture buildup in enclosures. Also known as drain plugs, these breather vents have a small outlet that allows condensation to drain.
Keep moisture, dirt, and debris from entering your oil reservoirs.
Use these mufflers with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.
A small hex size makes these high-flow mufflers a great fit for cramped spaces.
Commonly used with high-flow, air-powered equipment, such as diaphragm pumps and valves, these mufflers reduce noise and filter exhaust fumes without restricting flow.
Adjust the flow by turning the screw. Use these mufflers with air-powered tools and cylinders to reduce noise and filter exhaust fumes.
Made entirely of stainless steel, these mufflers stand up to harsh, corrosive environments.
Replace your muffler less often—these have a filter design that stays clean longer than porous mufflers.
These mufflers can be cleaned for an extended service life.
In addition to a filter, these mufflers have a wool felt disc to trap oil mist.
With a threaded connection on both ends, these mufflers can be installed anywhere in your line.
These mufflers exhaust through narrow holes on one end to provide a concentrated blast of air. Use them to eject items from your conveyor and direct exhaust away from delicate applications.
Also known as reclassifiers, these mufflers have a clear reservoir with a drain plug to remove and store oil mist for reuse.
Install these mufflers in air-powered drills and other loud equipment. They filter exhaust fumes and reduce noise by 30 dB, a reduction that's equivalent to putting in earplugs.
With a threaded connection on both ends, these mufflers can be installed anywhere in your line. They reduce noise by up to 45 dB.
Don’t let an unexpected clog interrupt your work. These mufflers have a filter that slides up slowly as it clogs to indicate when the muffler should be replaced. They reduce noise by 30-35 dBA
Suitable for use with welding equipment, these mufflers are made of flame-resistant materials. They reduce noise by 35 dB.
These steam traps offer good corrosion resistance.
Suitable for food, pharmaceutical, and other sanitary environments, these steam traps are made of 316 stainless steel with a Viton® fluoroelastomer O-ring to stand up to frequent washdowns with harsh cleaners and sanitizers.
Also known as thermostatic steam traps, these increase the efficiency of your radiator by venting cool air.
Also known as inverted-bucket steam traps, these provide near-continuous discharge to accommodate high condensate levels.
Also known as thermodynamic steam traps, these discharge condensate when close to steam temperature for minimal energy loss.
When close to steam temperature, these traps—also called thermodynamic steam traps—release condensate from steam lines to save energy in food, pharmaceutical, and other sanitary environments.
Also known as thermostatic steam traps, these vent cool air and condensate to increase energy efficiency in your steam lines.
Prevent drum failure by using these vents to release pressure caused by sudden temperature changes and vacuum buildup caused by draining liquids.
No need to vent your plumbing to the outdoors—these valves allow air into your drain, waste, and vent system.