Manufacturer Manufacturer | Show |
|---|
|
Manufacturer Manufacturer | Hide |
|---|
|
|
Container Type Container Type |
|---|
 |  |
| Bottle | Tube |
 |  |
| Brush-Top Bottle | Spray Bottle |
For Use On For Use On |
|---|
|
Type Type |
|---|
|
Locking Strength Locking Strength |
|---|
|
Cure Type Cure Type |
|---|
|
Container Size Container Size |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Formulation Formulation |
|---|
|
Removal Method Removal Method |
|---|
|
Consistency Consistency |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Mixing Required Mixing Required |
|---|
|
Clarity Clarity |
|---|
|
Breakaway Torque Breakaway Torque |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
About Structural Adhesives
More
High-Temperature Threadlockers
Keep threaded fasteners from loosening at temperatures up to 450° F. These threadlockers begin to harden once coated surfaces are threaded together and exposure to air is blocked.
Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.
Threadlockers with medium locking strength require a hand tool to unthread.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Temp. Range, °F | For Max. Thread Dia. | Consistency | Viscosity, cP | Breakaway Torque, in.-lbs. | Color | Each | |
Medium Locking Strength | ||||||||||||
Vibra-Tite Threadlockers | ||||||||||||
| 123 | 0.06 | Tube | 5 min. | 24 hrs. | -65° to 450° | 3/4" | Thick Liquid | 2,600 | 170 | Blue | 000000000 | 00000 |
| 123 | 0.34 | Bottle | 5 min. | 24 hrs. | -65° to 450° | 3/4" | Thick Liquid | 2,600 | 170 | Blue | 000000000 | 0000 |
| 123 | 1.69 | Bottle | 5 min. | 24 hrs. | -65° to 450° | 3/4" | Thick Liquid | 2,600 | 170 | Blue | 000000000 | 00000 |
| 123 | 8.45 | Bottle | 5 min. | 24 hrs. | -65° to 450° | 3/4" | Thick Liquid | 2,600 | 170 | Blue | 000000000 | 00000 |
Reusable Threadlockers
These threadlockers hold securely but stay flexible, so fasteners can be adjusted, removed, or reused. They cure at room temperature.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Temp. Range, °F | For Max. Thread Dia. | Consistency | Viscosity, cP | Breakaway Torque | Color | Each | |
Medium Locking Strength | ||||||||||||
Vibra-Tite Threadlockers | ||||||||||||
| VC-3 | 0.17 | Tube | 10 sec. | 30 min. | -65° to 160° | 2" | Thin Liquid | 230 | Not Rated | Red | 00000000 | 00000 |
| VC-3 | 1 | Brush-Top Bottle | 10 sec. | 30 min. | -65° to 160° | 2" | Thin Liquid | 230 | Not Rated | Red | 00000000 | 00000 |
Primers for Threadlockers, Retaining Compounds, and Acrylic Adhesives
To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Drying Time | Consistency | Viscosity, cP | Color | Each | |
Vibra-Tite Primers | ||||||||
| 611 | 8 fl. oz. | Spray Bottle | 30 sec. | Thin Liquid | 3 | Green | 00000000 | 000000 |