About Ball and Roller Bearings
More
About Plain Bearings
More
Vibration-Damping Oil-Embedded Sleeve Bearings
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Shell Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings with Steel Shell and Neoprene Rubber Cushion | ||||||||
|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||||
| 1" | 1" | 7/8" | 750 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 0° to 220° | 0000000 | 000000 |
For 1/2" Shaft Dia. | ||||||||
| 1" | 1" | 7/8" | 1,000 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 0° to 220° | 0000000 | 00000 |
For 5/8" Shaft Dia. | ||||||||
| 1 1/4" | 1 1/4" | 1 1/8" | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 0° to 220° | 0000000 | 00000 |
For 3/4" Shaft Dia. | ||||||||
| 1 1/4" | 1 1/4" | 1 1/8" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 0° to 220° | 0000000 | 00000 |
For 1" Shaft Dia. | ||||||||
| 1 5/8" | 1 1/2" | 1 3/8" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 0° to 220° | 0000000 | 00000 |
841 Bearing Bronze Bearings with 304 Stainless Steel Shell and Silicone Rubber Cushion | ||||||||
For 1/4" Shaft Dia. | ||||||||
| 9/16" | 3/4" | 3/4" | 75 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 00000 |
For 3/8" Shaft Dia. | ||||||||
| 7/8" | 5/8" | 5/8" | 90 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 00000 |
For 1/2" Shaft Dia. | ||||||||
| 1" | 5/8" | 5/8" | 125 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 00000 |
For 5/8" Shaft Dia. | ||||||||
| 1" | 3/4" | 3/4" | 185 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 00000 |
For 1" Shaft Dia. | ||||||||
| 1 1/2" | 1 1/2" | 1 1/2" | 600 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
For 1 1/8" Shaft Dia. | ||||||||
| 1 5/8" | 1 1/2" | 1 1/2" | 670 lbs. @ 30 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
For 1 1/4" Shaft Dia. | ||||||||
| 1 3/4" | 1 1/2" | 1 1/2" | 750 lbs. @ 30 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
For 10mm Shaft Dia. | ||||||||
| 20mm | 25mm | 25mm | 155 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
For 12mm Shaft Dia. | ||||||||
| 25mm | 25mm | 25mm | 185 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
For 14mm Shaft Dia. | ||||||||
| 28mm | 25mm | 25mm | 215 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
For 16mm Shaft Dia. | ||||||||
| 28mm | 25mm | 25mm | 245 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
For 20mm Shaft Dia. | ||||||||
| 30mm | 30mm | 30mm | 370 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
For 25mm Shaft Dia. | ||||||||
| 36mm | 30mm | 30mm | 460 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 000000 |
High-Load Dry-Running Sleeve Bearings
Bearings with
6061 Aluminum Shell
A metal shell adds strength.
Frelon bearings with 6061 aluminum shell reduce vibration and are chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Frelon Plastic Bearings with 6061 Aluminum Shell | |||||
|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||
| 3/8" | 1/2" | 310 lbs. @ 120 rpm | -400° to 400° | 00000000 | 000000 |
For 3/8" Shaft Dia. | |||||
| 5/8" | 1/2" | 310 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 1/2" Shaft Dia. | |||||
| 3/4" | 3/4" | 470 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 5/8" Shaft Dia. | |||||
| 7/8" | 3/4" | 950 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 3/4" Shaft Dia. | |||||
| 1" | 1" | 1,250 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 1" Shaft Dia. | |||||
| 1 1/4" | 1 1/2" | 1,900 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 1 1/4" Shaft Dia. | |||||
| 1 1/2" | 2" | 5,050 lbs. @ 30 rpm | -400° to 400° | 00000000 | 00000 |
For 1 1/2" Shaft Dia. | |||||
| 1 3/4" | 2" | 5,050 lbs. @ 30 rpm | -400° to 400° | 00000000 | 00000 |
For 2" Shaft Dia. | |||||
| 2 1/4" | 3" | 7,600 lbs. @ 30 rpm | -400° to 400° | 00000000 | 000000 |
Metric Frelon Plastic Bearings with 6061 Aluminum Shell | |||||
For 6mm Shaft Dia. | |||||
| 10mm | 10mm | 250 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
For 8mm Shaft Dia. | |||||
| 12mm | 8mm | 200 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
| 12mm | 12mm | 300 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
| 14mm | 8mm | 200 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 10mm Shaft Dia. | |||||
| 14mm | 16mm | 400 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
For 12mm Shaft Dia. | |||||
| 16mm | 12mm | 300 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
| 16mm | 16mm | 400 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
For 16mm Shaft Dia. | |||||
| 20mm | 12mm | 600 lbs. @ 60 rpm | -400° to 400° | 0000000 | 00000 |
| 20mm | 16mm | 800 lbs. @ 60 rpm | -400° to 400° | 0000000 | 00000 |
| 20mm | 25mm | 1,250 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 20mm Shaft Dia. | |||||
| 25mm | 20mm | 1,000 lbs. @ 60 rpm | -400° to 400° | 0000000 | 00000 |
| 25mm | 30mm | 1,500 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 25mm Shaft Dia. | |||||
| 30mm | 25mm | 1,250 lbs. @ 60 rpm | -400° to 400° | 0000000 | 00000 |
For 30mm Shaft Dia. | |||||
| 35mm | 25mm | 2,500 lbs. @ 30 rpm | -400° to 400° | 00000000 | 00000 |
| 35mm | 30mm | 3,000 lbs. @ 30 rpm | -400° to 400° | 0000000 | 000000 |
Recycled Plastic Dry-Running Sleeve Bearings
Reduce your carbon footprint without sacrificing performance. Made of recycled thermoplastic, these bearings are a sustainable alternative to standard plastic dry-running bearings.
For technical drawings and 3-D models, click on a part number.
| For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic Blend Bearings | ||||||
|---|---|---|---|---|---|---|
For 6 mm Shaft Dia. | ||||||
| 8 | 6 | 90 lbs. @ 120 rpm | Gray | -40° to 265° | 0000000 | 00000 |
For 8 mm Shaft Dia. | ||||||
| 10 | 10 | 150 lbs. @ 120 rpm | Gray | -40° to 265° | 0000000 | 0000 |
For 10 mm Shaft Dia. | ||||||
| 12 | 10 | 150 lbs. @ 120 rpm | Gray | -40° to 265° | 0000000 | 0000 |
For 12 mm Shaft Dia. | ||||||
| 14 | 12 | 180 lbs. @ 120 rpm | Gray | -40° to 265° | 0000000 | 0000 |
For 16 mm Shaft Dia. | ||||||
| 18 | 15 | 450 lbs. @ 60 rpm | Gray | -40° to 265° | 0000000 | 0000 |
Washdown Clamp-On Collar Ball Bearings
Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise. To install these bearings, tighten the single screw on the collar around its inner ring on your shaft for a mar-free hold.
Coated with nickel, the steel rings on these bearings won’t corrode from water and harsh cleaners, similar to 304 stainless steel. The inner ring is extended for added shaft support. All of these bearings have NSF registered H1 lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Capacity, lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | OD | OD Tolerance | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | |||||||||||||||
Nickel-Coated Steel Ring | |||||||||||||||
| 3/4" | 1.85" | 5/8" | 1.625" | Not Rated | 1.28125" | 2.0625" | 0.04688" | 2,600 | 1,400 | 3,100 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 0000000 |
| 1" | 2.047" | 3/4" | 1.21875" | Not Rated | 1.4375" | 2.26563" | 0.04688" | 2,800 | 1,650 | 2,700 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| 1 3/16" | 2.441" | 7/8" | 2.15625" | Not Rated | 1.5625" | 2.65625" | 0.0625" | 4,350 | 2,550 | 2,300 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| 1 1/4" | 2.835" | 15/16" | 2.53125" | Not Rated | 1.75" | 3.07813" | 0.0625" | 5,750 | 3,450 | 2,000 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| 25mm | 52mm | 19.1mm | 46.8mm | Not Rated | 36.5mm | 57.5mm | 1.2mm | 2,800 | 1,650 | 2,700 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| 35mm | 72mm | 23.8mm | 64.3mm | Not Rated | 44.5mm | 78.2mm | 1.6mm | 5,750 | 16,300 | 2,000 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| 40mm | 80mm | 27.8mm | 71.8mm | Not Rated | 50.8mm | 86.5mm | 1.6mm | 7,300 | 4,450 | 1,750 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
Clamp-On Collar Ball Bearings
Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold. Tighten the single screw on the locking collar around its inner ring on your shaft to center and secure the shaft in the bearing bore. The collar’s firm grip reduces vibration and noise in your system. The steel rings on these bearings have a black-oxide finish for some corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | |||||||||||||||
Black-Oxide Steel Ring | |||||||||||||||
| ER204 | 20mm | 47mm | 16mm | 30mm | 31mm | 52mm | 1.2mm | 2,600 | 1,400 | 6,450 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| ER205 | 25mm | 52mm | 19mm | 35mm | 35mm | 58mm | 1.2mm | 2,800 | 1,650 | 6,350 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| ER206 | 30mm | 62mm | 22mm | 41mm | 38mm | 68mm | 1.6mm | 4,350 | 2,550 | 5,450 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| ER208 | 40mm | 80mm | 28mm | 52mm | 49mm | 88mm | 1.6mm | 7,300 | 4,450 | 4,150 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| ER209 | 45mm | 85mm | 28mm | 58mm | 49mm | 91mm | 1.6mm | 7,900 | 5,100 | 3,800 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
Sealed | |||||||||||||||
Black-Oxide Steel Ring | |||||||||||||||
| ER12 | 3/4" | 1 27/32" | 5/8" | 1.1875" | 1.219" | 2.063" | 0.047" | 2,600 | 1,400 | 10,200 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 00000 |
| ER16 | 1" | 2 1/16" | 3/4" | 1.375" | 1.375" | 2.266" | 0.047" | 2,800 | 1,650 | 9,000 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 00000 |
| ER20 | 1 1/4" | 2 7/16" | 7/8" | 1.59375" | 1.5" | 2.656" | 0.063" | 4,350 | 2,550 | 7,600 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| ER20 | 1 1/4" | 2 27/32" | 15/16" | 1.84375" | 1.688" | 3.078" | 0.063" | 5,750 | 3,450 | 6,500 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| ER23 | 1 7/16" | 2 27/32" | 15/16" | 1.84375" | 1.688" | 3.078" | 0.063" | 5,750 | 3,450 | 6,500 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| ER24 | 1 1/2" | 3 5/32" | 1 3/32" | 2.0625" | 1.938" | 3.406" | 0.063" | 7,300 | 4,450 | 5,850 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
| ER32 | 2" | 3 15/16" | 1 3/16" | 2.71875" | 2.1875" | 4.188" | 0.094" | 9,750 | 6,600 | 4,500 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
Vibration-Damping Oil-Embedded Mounted Sleeve Bearings
With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise. At startup, friction causes the bearing to release a thin layer of oil on the bearing’s surface. All are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
| 1/4" | 9/16" | 1 1/8" | 2 3/4" | 1" | 1" | 15/32" | 5/16" | 2" | 500 lbs. @ 120 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 000000 |
| 3/8" | 9/16" | 1 1/8" | 2 3/4" | 1" | 1" | 15/32" | 5/16" | 2" | 750 lbs. @ 120 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1/2" | 9/16" | 1 1/8" | 2 3/4" | 1" | 1" | 15/32" | 5/16" | 2" | 1,000 lbs. @ 120 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 00000 |
| 5/8" | 45/64" | 1 13/32" | 3 3/4" | 1 1/4" | 1 1/4" | 9/16" | 3/8" | 3" | 1,550 lbs. @ 60 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 00000 |
| 3/4" | 45/64" | 1 13/32" | 3 3/4" | 1 1/4" | 1 1/4" | 9/16" | 3/8" | 3" | 1,850 lbs. @ 60 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 00000 |
| 7/8" | 15/16" | 1 7/8" | 5" | 1 1/2" | 1 1/2" | 5/8" | 1/2" | 4" | 2,600 lbs. @ 60 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1" | 15/16" | 1 7/8" | 5" | 1 1/2" | 1 1/2" | 5/8" | 1/2" | 4" | 3,000 lbs. @ 60 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 1/8" | 1 1/16" | 2 1/8" | 6" | 1 3/4" | 1 3/4" | 13/16" | 1/2" | 4 9/16" | 3,900 lbs. @ 30 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 1/4" | 1 1/16" | 2 1/8" | 6" | 1 3/4" | 1 3/4" | 13/16" | 1/2" | 4 9/16" | 4,350 lbs. @ 30 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 00000 |
Corrosion-Resistant Dry-Running Mounted Sleeve Bearings
Use these UHMW bearings in wet, corrosive environments.
Bearings with UHMW housing are made of a single UHMW polyethylene block. They have good vibration-damping qualities.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
UHMW Plastic Bearings with UHMW Plastic Housing | |||||||||||||
| 1/2" | 1 3/16" | 2 3/16" | 4 3/4" | 1 1/2" | 1 1/2" | 7/8" | 7/16" | 3 3/8" | 95 lbs. @ 120 rpm | -200° to 180° | Fixed Alignment | 0000000 | 000000 |
| 5/8" | 1 3/16" | 2 3/16" | 4 3/4" | 1 1/2" | 1 1/2" | 7/8" | 7/16" | 3 3/8" | 190 lbs. @ 60 rpm | -200° to 180° | Fixed Alignment | 0000000 | 00000 |
| 3/4" | 1 5/16" | 2 1/2" | 5 1/4" | 1 1/2" | 1 1/2" | 15/16" | 7/16" | 3 3/4" | 190 lbs. @ 60 rpm | -200° to 180° | Fixed Alignment | 0000000 | 00000 |
| 1" | 1 7/16" | 2 3/4" | 5 1/2" | 1 1/2" | 1 1/2" | 15/16" | 7/16" | 4" | 190 lbs. @ 60 rpm | -200° to 180° | Fixed Alignment | 0000000 | 00000 |
| 1 1/4" | 1 7/8" | 3 5/8" | 6 1/2" | 1 3/4" | 1 3/4" | 1 1/16" | 9/16" | 5" | 440 lbs. @ 30 rpm | -200° to 180° | Fixed Alignment | 0000000 | 00000 |
| 1 1/2" | 2" | 4" | 7" | 1 3/4" | 1 3/4" | 1 1/16" | 9/16" | 5 3/8" | 440 lbs. @ 30 rpm | -200° to 180° | Fixed Alignment | 0000000 | 00000 |
| 1 15/16" | 2 1/4" | 4 1/2" | 8" | 2" | 2" | 1 3/16" | 11/16" | 6 1/4" | 500 lbs. @ 30 rpm | -200° to 180° | Fixed Alignment | 0000000 | 00000 |
High-Speed Mounted Ball Bearings
These bearings have the highest speed ratings of any mounted ball bearing that we offer. The clamp-on collar creates a 360° grip around the shaft for a strong, mar-free hold. Bearings are self-aligning to compensate for shaft misalignment.
Bearings with torque indicator tell you when the shaft is centered, ensuring smooth rotation in applications with high vibration.
Shielded bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Shielded Steel Bearings with Cast Iron Housing—Shaft Mount Type: Clamp On | |||||||||||||||
With Torque Indicator | |||||||||||||||
| 1 7/16" | 1 7/8" | 3 11/16" | 6 9/16" | 1 55/64" | 13/16" | 21/32" | 5" | 5,700 | 3,400 | 5,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 0000000 |
| 1 15/16" | 2 1/4" | 4 9/16" | 8 1/8" | 2 3/16" | 7/8" | 25/32" | 6 1/4" | 7,900 | 5,200 | 4,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |