Filter by
Electrical Connection
Measures
Accelerometer Type
Power Source
Acceleration
Housing Material
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Material
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Mount Type
Vibration Acceleration
Vibration-Monitoring Kits
 |
 |
Keep machinery running smoothly by monitoring its health and status from your computer. Often used with electric motors, pumps, and lathes, these kits measure changes in vibration and temperature—identifying equipment problems and potential failures before they occur. Plug in the sensor, set your thresholds, and view data directly on your screen. You’ll also receive email notifications when vibrations move beyond your specified range, making them good for preventative maintenance. These sensors are 20 times faster than our other vibration monitors, and they don’t require devices such as programmable logic controllers (PLCs) to operate.
Sensors mount directly to your equipment. Use the magnetic base for quick installation, or use the threaded hole for a more permanent setup. Once the sensor is hooked up, you can either wire it directly to the receiver or connect it to the wireless transmitter to view data remotely.
USB Connection—Kits with a USB connection link only to your computer for direct and easy monitoring.
Power-Over-Ethernet—Kits with an Ethernet connection can be configured to a wider network, transmit data over longer runs of cable, and integrate into other automated systems, such as a PLC.
Housing | Receiver | Wireless Transmitter | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sensors Included | Vibration Accel. Range, g | Temp. Range, ° F | Freq. Range, Hz | Ht. | Dia. | Mounting Hole Thread Size | Cord Lg., ft. | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Voltage, V DC | Software Included | Includes | Each | |||
USB Connection | ||||||||||||||||||||
| 1 | 0 to 102 | -40 to 257 | 10 to 21,000 | 11/16" | 3/4" | 6-32 | 10 | 5 1/4" | 3 3/4" | 3 1/4" | 3/4" | 3" | 1 1/2" | 24 | Yes | Two Antennas | 4009N11 | 0000000 | ||
| 4 | 0 to 102 | -40 to 257 | 10 to 21,000 | 11/16" | 3/4" | 6-32 | 10 | 7" | 7 1/4" | 4 1/2" | 3/4" | 3" | 1 1/2" | 24 | Yes | Eight Antennas | 4009N12 | 00000000 | ||
Power-Over-Ethernet Connection | ||||||||||||||||||||
| 1 | 0 to 102 | -40 to 257 | 10 to 21,000 | 11/16" | 3/4" | 6-32 | 10 | 5 1/4" | 3 3/4" | 3 1/4" | 3/4" | 3" | 1 1/2" | 24 | Yes | Two Antennas, Receiver Power Injector with 6-ft. Lg. Cord and Three-Prong Plug | 4009N13 | 00000000 | ||
| 4 | 0 to 102 | -40 to 257 | 10 to 21,000 | 11/16" | 3/4" | 6-32 | 10 | 17 3/4" | 12" | 5 3/4" | 3/4" | 3" | 1 1/2" | 24 | Yes | Eight Antennas, Receiver Power Injector with 6-ft. Lg. Cord and Three-Prong Plug | 4009N14 | 00000000 | ||
Vibration Monitors
 |
These monitors are constructed entirely of stainless steel for excellent corrosion resistance and are IP68 and IP69K rated for protection from temporary submersion and high-pressure washdowns. Connect to your data collector or programmable logic controller to monitor vibration. The 4-pole micro M12 plug connects to the included cable and socket to quickly connect and disconnect it.
To view wiring diagrams, select a part number and click Product Detail.
Housing | Plug | Power Cord | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measures | Vibration Speed Range, mm/s | Freq. Range, Hz | Current Output, mA | Input Voltage Range, V DC | Ht. | Dia. | Temp. Range, ° F | Mounting Stud Thread Size | No. of Poles | Connection | Connection | No. of Wires | Cord Lg., ft. | Enclosure Rating | Certification | Specs. Met | Includes | Each | ||
| Vibration | 0 to 25 | 10 to 1,000 | 4 to 20 | 9.6 to 32 | 2 1/2" | 7/8" | -10 to 210 | M8 | 4 | M12 | M12 | 4 | 16 | IP68, IP69K | UL Listed, C-UL Listed, CE Marked | ISO 10816 | One 1/4"-28 Male Adapter, One 1/4"-28 to M8 Male Adapter | 3738T1 | 0000000 | |
| Vibration | 0 to 50 | 10 to 1,000 | 4 to 20 | 9.6 to 32 | 2 1/2" | 7/8" | -10 to 210 | M8 | 4 | M12 | M12 | 4 | 16 | IP68, IP69K | UL Listed, C-UL Listed, CE Marked | ISO 10816 | One 1/4"-28 Male Adapter, One 1/4"-28 to M8 Male Adapter | 3738T12 | 000000 | |
Acceleration Sensors
 |  |
Single-Axis Accelerometer | Three-Axis Accelerometer |
 |
A-Code, 4-Pole Male |
 |
A-Code, 5-Pole Male |
Gauge your machine’s health with more precision than vibration monitors. These sensors measure acceleration, vibration, and frequency. Mount them to motors, fans, and gearboxes. Made entirely of stainless steel, they stand up to prolonged exposure to water and mild chemicals. These sensors use the IEPE communication protocol, so you can connect them to a vibration controller or edge device.
All of these sensors are IP67 rated to block out dust and water if briefly submerged.
Three-Axis Accelerometer—Three-axis sensors pick up motion in three directions—up and down, side to side, and back and forth—for a more comprehensive assessment than single-axis sensors.
IP68 Enclosure Rating and IP69K Enclosure Rating—IP68 and IP69K rated sensors also stand up to spraying water during high-pressure washdowns.
No. of | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Accel. Range, g | Freq. Range, Hz | Vibration Accel. Range, g | Accuracy | Cord Lg., ft. | Cord Included | Current Output, mA | Input Voltage Range, V DC | Temp. Range, ° F | Mounting Fastener Thread Size | Wires | Poles | Enclosure Rating | Certification | Each | |||
Single-Axis Accelerometer | |||||||||||||||||
M12 Connection | |||||||||||||||||
| -80 to 80 | 2 to 10,000 | -50 to 50 | ±5% | — | No | 0.5 to 8 | 10 to 12 | -65 to 255 | 1/4"-28 | — | 4 | IP67 | CE Marked | 6196N11 | 0000000 | ||
Three-Axis Accelerometer | |||||||||||||||||
M12 Connection | |||||||||||||||||
| -40 to 40 | 0 to 4,500 | -40 to 40 | ±10% | — | No | 4 to 6 | 11 to 16 | -20 to 185 | M5 | — | 5 | IP67, IP68, IP69K | UL Listed, CE Marked | 6196N13 | 000000 | ||
Wire Lead Connection | |||||||||||||||||
| -40 to 40 | 0 to 4,500 | -40 to 40 | ±10% | 33 | Yes | 4 to 6 | 11 to 16 | -20 to 185 | M5 | 5 | — | IP67, IP68, IP69K | UL Listed, CE Marked | 6196N14 | 000000 | ||
 |
A-Code, 4-Pole Female |
Voltage | Current, amp | Housing Material | Temp. Range, ° F | Enclosure Rating | Each | ||
|---|---|---|---|---|---|---|---|
| 30V AC/30V DC | 4 | Polyurethane Rubber | -10 to 175 | IP66K, IP67 | 4490N13 | 000000 |
Vibration Switches
 |
Two easy-to-set dials allow you to adjust a set activation point for vibration as well as a time delay to avoid false triggering from start-up vibration. An LED alarm signals if the set activation point is exceeded. Plug the included cable into your data collector or programmable logic controller.
IP67 Enclosure Rating—These switches are IP67 rated for protection from dust and temporary submersion.
Activation Point | Housing | Power Cord | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Range, in/sec | Freq. Range, Hz | Current Output, mA | Input Voltage Range, V DC | Ht. | Dia. | Temp. Range, ° F | Mounting Stud Thread Size | Electrical Connection Type | Connection | No. of Wires | Cord Lg., ft. | Includes | Enclosure Rating | Certification | Specs. Met | Each | |||
1 On Switch Starting Position | |||||||||||||||||||
SPST-NC | |||||||||||||||||||
| 0 to 1 | 10 to 1,000 | 4 to 20 | 18 to 32 | 2.9" | 1 1/16" | -10 to 175 | M8 | Plug In | M12 | 4 | 16 | Plastic Cover | IP67 | UL Listed, C-UL Listed, CE Marked | ISO 10816 | 1161T11 | 0000000 | ||
| 0 to 2 | 10 to 1,000 | 4 to 20 | 18 to 32 | 2.9" | 1 1/16" | -10 to 175 | M8 | Plug In | M12 | 4 | 16 | Plastic Cover | IP67 | UL Listed, C-UL Listed, CE Marked | ISO 10816 | 1161T12 | 000000 | ||
