We will reply to your message within an hour.
A permanent adhesive on one side of this tape stays put, while a tacky adhesive on the other side lets you open and close bags or reposition signs.
Made of chemical-resistant PVC, this tape securely seals packages in harsh environments.
Also known as gaffer's tape, this conformable cloth tape leaves no residue when removed. The matte finish won't reflect light. Choose a color that will blend in for temporary repairs.
Our thinnest duct tape, this tape is easy to unwind and tear by hand.
Use these tapes for light duty mending and holding.
Often used to repair vinyl facings, this tape can be used on water heater blankets and fiberglass insulation joints.
Brush on this liquid to mask small surfaces and irregular shapes.
Use this solvent-resistant plastic tape for anodizing and electroplating applications.
This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.
Outline and draw attention to safety zones and hazards with this tape.
Made to the highest standards for cleanliness, this tape meets clean room requirements. It releases minimal contaminants, leaves no residue behind, and comes sealed in a plastic bag. Use it to mark hazardous items or areas.
Mark aisles and stairs with a high-contrast reflective strip.
Providing all-weather corrosion protection, this vinyl tape resists salt water, UV light, acids, and alkalies. Use it to wrap pipes and electrical conduit both above and below ground.
Made of thick vinyl to resist abrasion, these tape sheets protect floor labels from heavy foot and vehicle traffic.
Protect signs posted on windows, glass, and other surfaces from debris and moisture without obstructing clarity.
Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.
Insulate wire and cable splices, wrap wire harnesses, and repair cable jacketing with this stretchy tape.
Also known as mastic tape, this tape is thicker than other electrical tape to cushion, insulate, and seal out moisture and environmental contaminants in electrical connections.
Apply this liquid for a skin-tight protective coating that insulates and resists moisture, acids, and corrosion.
These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.
Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.
This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.
Refill the tape in your Brady BMP21 label printer.
This label tape works in Brady M710 printers.
Tape works with Epson label printers.
This label tape works with Dyno Rhino model printers.
Use this tape with Dymo LetraTag or Office-Mate II embossing label printers.
Cut these labels to a desired length. Use color to identify equipment, materials, and documents at a glance.
Includes six colors of label tape, each with its own dispenser with serrated edge for cutting.
These dispensers make it quick and easy to peel off a label when you’re ready to use one. Dispensers have a serrated edge for cutting.
Identify equipment and materials in low-light conditions.
This label tape can withstand temperatures up to 240° F and is autoclavable, so you can use it to identify equipment that needs to be sterilized.
The adhesive on these labels withstands temperatures from -320° to 170° F.
Point to small areas on equipment such as circuit boards.
Use a permanent marker to write your message.
Protect messages from moisture and smudging with the clear laminating flap.
Apply directly onto clean, dry pipes for clear identification of contents.
Specify the message you need to label the contents of a pipe. Apply these markers directly onto clean, dry pipes.
Use a permanent marker to label the contents of a pipe. Apply directly onto clean, dry pipes.
Identify pipe contents in low-light conditions.
Specify the message you need to label the contents of a pipe in low-light conditions.
Use a permanent marker to label the contents of a pipe. They are reflective so they improve visibility in low-light conditions.
Choose from books with letters and symbols or a range of numbers.
These books have messages used in electrical systems such as AC and DC.
These books have characters used in telecom configurations such as L1 and T1.
Choose a range of characters. The characters repeat on these markers so you can wrap them around various-sized wires.
The characters repeat on these markers so you can wrap them around various-sized wires.
Telecom characters repeat on these markers so you can wrap them around various-sized wires.
These dispensers have a space to write information on a wire marker before using it.
Write a message on these blank markers with a permanent marker, then wrap them around wire or cables.
The messages on these labels clearly display the status of materials. Write additional information in the spaces provided with a permanent marker.
Write your information on these labels and then seal the laminating flap to protect your message from weather and tampering.
These labels cannot be removed without visible evidence of tampering—they rip and leave residue when peeled.
Indicate voltage and identify power lines, conduit, fuse boxes, switches, and other electrical equipment.
Notify workers of electrical hazards such as high-voltage equipment and requirements for personal protection.
Specify a custom message to identify equipment and materials, and we'll create a label for you.
To limit the spread of illness by helping people social distance, these decals have brightly-colored symbols and text that make them easy to see and understand.
Clearly identify areas that require personal protective equipment, such as face masks, gloves, hard hats, safety glasses, and hearing protection.
These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.
These large decals have a pebbled nonskid surface and an adhesive backing that sticks to most surfaces.
Directing people to first-aid stations, the bright color, clear picture, and text on these decals make them easy to notice and understand.
Tear a strip of tape off the perforated roll for easy, uniform installation.
Thicker than other floor marking tape, this tape withstands abrasion in high-traffic areas.
You can easily pull this tape up when it's no longer needed.
Made of a pliable PVC with a rubber adhesive, this tape stretches and conforms to uneven surfaces for a secure hold.
Designate aisles and work zones in your clean room. Individually bagged, this tape is made to the highest standards for cleanliness, releasing minimal contaminants and leaving no residue behind.
Call attention to hazards in low-light conditions.
Stick safety messages and reminders right where they're needed.
These peel-and-stick shapes make it easy to outline equipment and other areas within your facility.
Use these arrows to direct traffic indoors and out.
Thicker than other floor marking arrows, use these abrasion-resistant arrows in high-traffic areas.
The checkered pattern draws greater attention to safety zones and hazards than solid tape.
Direct traffic in low-light conditions.
Thicker than other floor marking dots, use these abrasion-resistant dots in high-traffic areas.
Use these dots to direct traffic in your facility.
Use these footprints to direct traffic in your facility.
Tie these flags around posts and stakes.
Attach to curved or flat steel surfaces.
Permanently mount these vertical rulers to walls and tanks.
Attach a plumb bob (sold separately) to the rope’s hook and lower it into your tank to take a measurement.
A rigid vinyl backing gives this hook and loop stability.
Use the center hole to screw, nail, or rivet these discs to a surface.
A rubbery textured surface provides traction while being easy on shoes.
Wrap pipes, tubing, and fittings to prevent condensation from forming. These strips are for use on copper, iron, and steel.
The perforated vinyl facing allows moisture to evaporate and resists cracking and fading. These flexible sheets are good for insulating large enclosures.
Install these adhesive-back sheets to reduce noise from vibrating surfaces, such as duct and equipment housings.
Wrap fingers to protect against cuts and abrasions without limiting dexterity.
Keep track of where tools go on pegboards and other wall organizers.
Also known as conspicuity tape, this tape draws attention to vehicles.