McMaster-Carr logo
    Filter by
    Batteries Required
    DFARS Specialty Metals
    DC Voltage Accuracy
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Battery Size
    American Wire Gauge (AWG)
    Industrial Info Compare
    Attribute Image
    Batteries Included
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    68 Products

    Power Consumption Data Loggers

    Track power consumption over time. These loggers tap into a circuit and connect with PC software to visualize energy use and generate reports. They’re often used by energy auditors and facility managers to monitor equipment runtimes, optimize HVAC performance, and troubleshoot voltage spikes.
    Set the sampling interval to determine how often the logger takes measurements. A faster sampling interval will take more readings at the expense of battery life.
    Measures AC Voltage and Current
    Image of Product. Front orientation. Power Consumption Data Loggers. Measures AC Voltage and Current.
    A compact, economical choice for monitoring AC energy consumption. Includes test leads and a clamp-on probe for tapping into wiring without interrupting circuits. Requires one 9V battery as well as software for device setup and data exports, each sold separately.
    Batteries
    Data Log
    Cap.
    Electrical
    Phase
    AC Voltage,
    V AC
    AC Voltage
    Accuracy, V AC
    Current,
    amp
    Current
    Accuracy
    Sampling
    Interval
    Includes
    For Operating System
    Software
    Included
    Included
    Size
    No.
    Req.
    Each
    10,750Single0 to 500-1 to 10 to 3005%1 sec. to 18 hr.Carrying Case, Clamp-On Probe with 1.1" Jaw Opening, Test Leads with Alligator ClipsWindows 10 or EarlierNoNo9V100000000000000
    Accessories for Power Consumption Data Loggers
    Required Software for AC Voltage and Current Loggers (6 ft. Cord Lg.)0000000 Each 000000
    9V Battery00000000 Pkg. of 1 0000
    Measures AC and DC Voltage
    Image of Product. Front orientation. Power Consumption Data Loggers. Measures AC and DC Voltage.
    Measure, log, and track either AC or DC voltage with industry-leading accuracy. Our AC/DC logger can take as many as eight readings per second with a margin of error of just ±0.5%. Software is included for setup and analysis, along with test leads, batteries, and a USB cable to connect with your PC.
    True RMS AC Calculation—True RMS loggers take more accurate AC measurements than regular loggers because they can adapt to irregular waveform readings. They’re ideal for computers, adjustable-speed drives, and other devices that distort the shape of the AC sine wave by drawing current in short pulses.
    Batteries
    Data Log
    Cap.
    AC
    Calculation
    Electrical
    Phase
    Electrical Safety
    Rating
    AC Voltage,
    V AC
    AC Voltage
    Accuracy
    DC Voltage,
    V DC
    DC Voltage
    Accuracy
    Sampling
    Interval
    Includes
    For Operating System
    Software
    Included
    Included
    Size
    No.
    Req.
    Each
    240,000True RMSSingleCAT IV, 300V0 to 600-0.5% to 0.5%0 to 6000.5%125 ms to 24 hr.Test Leads with Alligator Clips, USB CordWindows 10 or EarlierYesYesAA200000000000000

    Power Consumption Meters

    Image of Product. Front orientation. Power Consumption Meters.
    Image of Specification. Front orientation. ZoomedIn view. Digital Display.

    Digital Display

    Measure the amount of power your devices draw and calculate energy costs with these consumption meters. Plug them directly into an outlet, and plug your tool or appliance into the front of the meter. To track your power costs, enter the local price per kilowatt-hour (kWh) into the meter, and they’ll display the total amount you’re spending. They also help you monitor the quality of electricity coming from your outlet.
    These meters meet U.S. and international safety standards. Rated CAT II, 150V, they can be safely used with most single-phase AC appliances and tools.
    Plug Type
    Max. Power,
    W
    Max. AC Voltage,
    V AC
    AC Voltage
    Accuracy
    Max. AC Current,
    amp
    Current
    Accuracy
    Max. Freq.,
    Hz
    Max. Power Consumption,
    kWh
    Max. Electrical
    Cost
    Ht.
    Wd.
    Dp.
    Display
    Type
    Certification
    No. of
    Blades
    Electrical
    Connection
    Features
    Each
    1,800150-1% to 1%151%659,999$9,9995.1"2.6"1 1/2"DigitalUL Listed, CSA Certified, CE Marked, ETL Listed
    3Straight BladeBackup Battery0000000000000

    Fluke Oscilloscope/Multimeters

    Image of Product. Front orientation. Oscilloscope/Multimeters.
    Perform electrical tests, record data, and see a graph of electrical waveforms with this combination multimeter and oscilloscope. Fluke oscilloscope/multimeters are known for quality and durability.
    To download and analyze data on a computer, software is required (not included).
    When used as an oscilloscope, the oscilloscope/multimeter is most accurate when the frequency is at least five times the maximum signal frequency you intend to measure.
    True RMS AC Calculation—The multimeter function is true RMS, so it accurately takes AC measurements regardless of the load type or sine wave shape. This is important for testing electronic devices that draw current in short pulses that can distort the shape of the wave, such as computers and adjustable-speed drives.
    Display Count—Display count is an industry designation and not an actual value. This 5,000-count oscilloscope/multimeter shows numbers up to 4,999.
    Mfr. Model
    No.
    No. of Digital
    Channels
    Freq.,
    MHz
    Electrical Safety
    Rating
    Max. AC Voltage,
    V AC
    Max. DC Voltage,
    V DC
    DC Voltage
    Accuracy
    Display
    Count
    Data Log
    Cap.
    Includes
    Certification
    Measures
    Batteries
    Included
    Each
    True RMS AC Calculation
    123B20 to 20CAT IV, 600V6006000.5%5,000512Alligator Clips, Battery Charger, BNC Adapter, Probe Tips, Test LeadsCSA Certified
    AC Voltage, Capacitance, Continuity, DC Voltage, TemperatureYes0000000000000000
     
    Accessories and Replacements for Oscilloscope/Multimeters
    Fluke SCC120B Software and Soft Case with Screen Protector, Magnet Hanging Kit (For Windows 10 and earlier)0000000 Each 0000000
    Replacement Test Leads (Fluke Model No. STL120-IV)0000000 Pair 000000
    Fabric Case (Fluke Model No. C789)00000000 Each 000000

    Data-Logging Multimeters

    Image of Product. Front orientation. Multimeters. Data-Logging Multimeters.
    Identify intermittent issues such as voltage spikes and temporary power flow problems—these meters record measurements from electrical tests over time. Review data in real time or save it for future analysis.
    True RMS AC Calculation—True RMS multimeters take accurate AC measurements regardless of the load type or sine wave shape. This is important for testing electronic devices that draw current in short pulses that can distort the shape of the wave, such as computers and adjustable-speed drives.
    Display Count—Display count is an industry designation and not an actual value. For example, a 6,000-count multimeter shows numbers up to 5,999. A higher display count means the multimeter can give a more precise measurement.
    Data Log
    Cap.
    Electrical Safety
    Rating
    Measures
    Max. AC Voltage,
    V AC
    Max. DC Voltage,
    V DC
    DC Voltage
    Accuracy
    Max. AC Current,
    amp
    Max. DC Current,
    amp
    Display
    Count
    Includes
    Each
    True RMS AC Calculation
    50,000CAT IV, 600VAC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance, Temperature1,0001,0000.025%101010,000Alligator Clips, Test Leads00000000000000
     

    Fluke Data-Logging Multimeters

    Image of Product. Front orientation. Multimeters. Fluke Data-Logging Multimeters.
    Record measurements from electrical tests over time to identify intermittent issues such as voltage spikes and temporary power flow problems. Review data captured by these high-quality and durable Fluke multimeters in real-time or save it for future analysis.
    True RMS AC Calculation—True RMS multimeters take accurate AC measurements regardless of the load type or sine wave shape. This is important for testing electronic devices that draw current in short pulses that can distort the shape of the wave, such as computers and adjustable-speed drives.
    Multimeters with Calibration Certificate—Multimeters with calibration certificate include a document stating that they have passed a test for accuracy.
    Display Count—Display count is an industry designation and not an actual value. For example, a 6,000-count multimeter shows numbers up to 5,999. A higher display count means the multimeter can give a more precise measurement.
    Multimeters
    Multimeters with
    Calibration Certificate
    Mfr. Model
    No.
    Data Log
    Cap.
    Electrical Safety
    Rating
    Measures
    Max. AC Voltage,
    V AC
    Max. DC Voltage,
    V DC
    DC Voltage
    Accuracy
    Max. AC Current,
    amp
    Max. DC Current,
    amp
    Hardware Features
    Display
    Count
    Includes
    Each
    Each
    True RMS AC Calculation
    28710,000CAT IV, 600VAC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance, Temperature1,0001,0000.025%1010Overload Protection50,000Alligator Clips, Test Leads0000000000000000000000000000
    28915,000CAT IV, 600VAC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Impedance, Resistance, Temperature1,0001,0000.025%1010Overload Protection50,000Alligator Clips, Test Leads0000000000000000000000000000
     
    Software
    To download and analyze data on a computer, software is required (not included). Connect your multimeter to a computer with the included USB cord.
    Mfr. Model
    No.
    For Fluke
    Model No.
    For Operating
    System
    Each
    FVF-SC2287, 289Windows 7 or Earlier00000000000000

    Current-Sensing Test Leads

    Image of Product. Front orientation. Test Leads. Current-Sensing Test Leads, Current Loop.
    Image of Product. Front orientation. Test Leads. Current-Sensing Test Leads, Current Clamp.

    Current Loop

    Current Clamp

    Measure current without interrupting the circuit by connecting these test leads to a multimeter or current meter.
    The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter or current meter.
    These test leads step down the sensed current to a level that works with a multimeter or current meter—the signal reduction ratio is the factor by which they reduce current.
    Test End
    For Max.
    Cord Dia.
    Connection End
    AC Current,
    amp
    DC Current,
    amp
    Current
    Accuracy
    Voltage Output Signal
    Per Amp Supplied
    For Current Range
    AC Voltage,
    V AC
    Electrical Safety
    Rating
    Freq. Range,
    kHz
    Jaw
    Opening
    Loop
    Opening
    Cord
    Lg.
    Batteries
    Req.
    Batteries
    Included
    Each
    Measures AC Current
    Flexible Current LoopSheathed Standard Banana Plug5 to 3,0001%10.000 mV AC, 1.000 mV AC, 1.000 mV DC5 amp to 300 amp
    50 amp to 3,000 amp
    1,000CAT IV, 600V5 to 407.6"78"YesYes00000000000000
     
    Measures AC Current and DC Current
    Current Clamp1.22"Sheathed Standard Banana Plug0 to 1,0000 to 1,0001%1.000 mV AC, 1.000 mV DC0 amp to 200 amp
    0 amp to 1,000 amp
    300CAT III, 300V0 to 101.25"59"YesYes00000000000000
     

    Magnetic Fluke Multimeter Hangers

    Image of ProductInUse. Front orientation. Multimeter Hangers.
    Image of Product. Front orientation. Multimeter Hangers.
    Free up your hands while using your Fluke multimeter by suspending it from this hanger.
    Mfr. Model
    No.
    For Fluke Model No.
    Each
    TPAK77IV, 83V, 87V, 88V, 113, 114, 115, 116, 117, 175, 177, 179, 233, 287, 289, 789, 1577, 15870000000000000

    Build-Your-Own Test Leads

    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style A.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style B.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style C.

    Style A

    Style B

    Style C

    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style D.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style E.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style F.

    Style D

    Style E

    Style F

    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style G.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style H.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style J.

    Style G

    Style H

    Style J

    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style K.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style L.

    Style K

    Style L

    Choose your own combination of test lead tips and cords.
    The connection end on the cords is a 4 mm banana plug, which is the standard for connecting to a multimeter.
    Cords
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style A.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style B.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style C.

    Style A

    Style B

    Style C

    Style
    Connection End
    Connection End Shape
    AC Voltage,
    V AC
    DC Voltage
    Current,
    amp
    Electrical Safety
    Rating
    No. of
    Cords
    Cord
    Lg.
    AWG
    Color
    Pair
    ASheathed Standard Banana Plug x Sheathed Standard Banana Plug90° Angle x 90° Angle1,0001,000 mV DC10CAT III, 1,000V247"18
    Black, Red0000000000000
    BSheathed Standard Banana Plug x Sheathed Standard Banana PlugStraight x 90° Angle1,0001,000V DC10CAT III, 1,000V247"18
    Black, Red000000000000
    CSheathed Standard Banana Plug x Sheathed Standard Banana PlugStraight x Straight1,0001,000V DC10CAT III, 1,000V247"18
    Black, Red000000000000
     
    Tips
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style D.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style E.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style F.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style G.

    Style D

    Style E

    Style F

    Style G

    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style H.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style J.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style K.
    Image of Product. Front orientation. Test Leads. Build-Your-Own Test Leads, Style L.

    Style H

    Style J

    Style K

    Style L

    Style
    Test End
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    Current,
    amp
    Electrical Safety
    Rating
    Test End Material
    Color
    Pair
    DAlligator Clip1,0001,00020CAT II, 1,000VNickel-Plated SteelBlack, Red0000000000000
    EAlligator Clip1,0001,00020CAT III, 1,000VNickel-Plated BrassBlack, Red000000000000
    FPointed Banana Plug1,0001,00010CAT III, 1,000VNickel-Plated BrassBlack, Red000000000000
    GRetractable Grabber1,0001,00010CAT III, 1,000VNickel-Plated BrassBlack, Red000000000000
    HPrecision Retractable Grabber1,0001,00010CAT II, 1,000VNickel-Plated Stainless SteelBlack, Red000000000000
    JRetractable Hook1,0001,00010CAT III, 1,000VNickel-Plated CopperBlack, Red000000000000
    KPrecision Retractable Hook1,0001,00020CAT III, 1,000VNickel-Plated BrassBlack, Red000000000000
    LRetractable Insulation Piercing Grabber1,0001,0005CAT III, 1,000VStainless SteelBlack, Red0000000000000
     

    Fluke Current-Sensing Test Leads

    Image of Product. Front orientation. Test Leads. Fluke Current-Sensing Test Leads, Current Clamp.

    Current Clamp

    Measure current without interrupting the circuit by connecting these test leads to a multimeter or current meter.
    The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter or current meter.
    These test leads step down the sensed current to a level that works with a multimeter or current meter—the signal reduction ratio is the factor by which they reduce current.
    Mfr. Model
    No.
    Test End
    For Max.
    Cord Dia.
    Connection End
    AC Current,
    amp
    Current
    Accuracy
    Current Output Signal per
    amp Supplied, mA
    For Current
    Range
    AC Voltage,
    V AC
    Electrical Safety
    Rating
    Freq. Range
    Jaw
    Opening
    For Fluke Model No.
    Cord
    Lg.
    Batteries
    Req.
    Each
    Measures AC Current
    i400Current Clamp1.25"Sheathed Standard Banana Plug1 to 4002%1.0001 amp to 400 amp1,000CAT IV, 600V5 Hz to 20 kHz1.25"27 II, 28 II, 77IV, 83V, 87V, 179, 287, 289, 787, 789, 1577, 158759"No00000000000000
     

    Fluke Test Lead Sensors

    Image of Product. Front orientation. Test Lead Sensors. Fluke Test Lead Sensors, Model Number 80BK-A.
    Image of Product. Front orientation. Test Lead Sensors. Fluke Test Lead Sensors, Model Number 80TK.

    Model Number 80BK-A

    Model Number 80TK

    Take temperature readings with a Fluke multimeter.
    Model Number 80BK-A—Fluke 80BK-A is a temperature probe and works with Fluke multimeters that measure temperature. It has 4 mm standard banana jack connection ends that attach to Fluke test leads that have 4 mm banana plugs.
    Model Number 80TK—Fluke 80TK is a thermocouple converter that adapts a Fluke multimeter without a temperature function to a thermometer using the included temperature probe. It has 4 mm standard banana plug connection ends that attach to 4 mm banana jacks on Fluke multimeters.
    Mfr. Model
    No.
    For Fluke Model No.
    Temp. Range,
    ° F
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    Test End
    Component
    Connection End
    Cord
    Lg.
    Test End Insulation
    Material
    Each
    80BK-A28 II, 87V, 116, 179, 233, 287, 289-40 to 500Needle TipSheathed Standard Banana Jack39"PTFE
    0000000000000
    80TK27 II, 28 II, 114, 115, 116, 117, 123, 175, 177, 179, 233, 287, 289, 789-40 to 5002460Needle TipSheathed Standard Banana Plug39"PTFE
    0000000000000

    Test Lead Kits

    Image of Product. Front orientation. Test Leads. Test Lead Kits.
    Perform electrical tests with a set of red and black test leads and interchangeable tips.
    The connection end on the test leads is a 4 mm banana plug, which is the standard for connecting to a multimeter.
    Includes
    Cord
    Lg.
    Color
    AWG
    Each
    Two Cords with Sheathed Straight and Sheathed Right-Angle Banana Plugs, CAT III, 1,000V, 10A
    Two Insulated Alligator Clips, CAT II, 1,000V, 10A
    Two Pointed Banana Plugs, CAT III, 1,000V, 10A
    Two Precision Retractable Grabbers, CAT II, 1,000V, 10A
    Pouch
    47"Black, Red18
    00000000000000
    Two Cords with Sheathed Straight and Sheathed Right-Angle Banana Plugs, CAT III, 1,000V, 10A
    Two Alligator Clips, CAT III, 1,000V, 10A
    Two Pointed Banana Plugs, CAT III, 1,000V, 6A
    Two Retractable Precision Grabbers, CAT III, 1,000V, 4A
    Two Retractable Grabbers, CAT III, 1,000V, 10A
    Two Retractable Hooks, CAT III, 1,000V, 10A
    Pouch
    63"Black, Red18
    0000000000000

    Test Leads

    Image of Product. Sheathed 90° Standard Banana Plug. Front orientation. Test Leads. Sheathed Standard Banana Plug, 90° Angle.
    Image of Product. Sheathed Straight Standard Banana Plug. Front orientation. Test Leads. Sheathed Standard Banana Plug, Straight.

    Sheathed 90° Standard Banana

    Plug

    Sheathed Straight Standard

    Banana Plug

    Replace a test lead or complete a set with a red or black lead.
    The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter.
    Test End
    Connection End
    Connection
    End Shape
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    Current,
    amp
    Electrical Safety
    Rating
    No. of
    Cords
    Cord
    Lg.
    AWG
    Test End Material
    Cord Insulation
    Material
    Choose a
    Color
    Each
    Retractable HookSheathed Standard Banana Plug90° Angle3003005CAT II, 300V148"18
    Gold-Plated CopperSilicone Rubber
    Black
    ,
    Red
    0000000000000
    Retractable HookSheathed Standard Banana PlugStraight3003005CAT II, 300V148"18
    Gold-Plated CopperSilicone Rubber
    Black
    ,
    Red
    000000000000
     

    Test Leads with Reel

    Image of Product. Front orientation. Test Leads. Test Leads with Reel.
    Extend the distance between your multimeter and the equipment you’re testing.
    One end of the test leads is a 4 mm banana plug, which is the standard for connecting to a multimeter. The other end is a 4 mm banana jack that attaches to test leads that have a 4 mm banana plug.
    Cord
    Color
    Connection End
    Connection
    End Shape
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    Current,
    amp
    Electrical Safety
    Rating
    AWG
    Cord Insulation
    Material
    Each
    40 ft. Long
    BlackSheathed Standard Banana Plug x Sheathed Standard Banana Jack90° Angle x Straight1,0001,00020CAT III, 1,000V18
    Silicone Rubber
    00000000000000
    RedSheathed Standard Banana Plug x Sheathed Standard Banana Jack90° Angle x Straight1,0001,00020CAT III, 1,000V18
    Silicone Rubber
    0000000000000
     

    Fluke Test Lead Kits

    Image of Product. Front orientation. Test Leads. Fluke Test Lead Kits.
    These kits include a set of red and black Fluke test leads with a variety of interchangeable tips.
    The connection end on the test leads is a 4 mm banana plug, which is the standard for connecting to a multimeter.
    Mfr. Model
    No.
    For Fluke Model No.
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    Current,
    amp
    Electrical Safety
    Rating
    Includes
    Cord
    Lg.
    Color
    Each
    TL22027 II, 28 II, 83V, 87V, 114, 115, 116, 117, 123, 175, 177, 179, 233, 287, 289, 373, 374, 787, 7891,0001,00010CAT II, 1,000VTwo Cords with Sheathed Straight Banana Plug and Sheathed Right-Angle Banana Plug
    Two Needle Tips
    Two Insulated Plunger Style Alligator Clips
    59"Black, Red0000000000000
    TLK-22527 II, 28 II, 83V, 87V, 175, 177, 179, 287, 289, 787, 789, 1577, 15871,0001,0001CAT IV, 600VTwo Cords with Sheathed Straight Banana Plug and Sheathed Right-Angle Banana Plug
    Two Needle Tips
    Two Insulated Alligator Clips
    Two Retractable Grabbers
    Two Retractable Precision Grabbers
    Two Retractable Precision Hooks
    Pouch
    59"Black, Red0000000000000
    TLK289287, 289, 376, 3811,0001,0003CAT II, 1,000VTwo Cords with Sheathed Straight Banana Plug and Sheathed Right-Angle Banana Plug
    Two Needle Tips
    Two Insulated Alligator Clips
    Two Retractable Grabbers
    Two Retractable Precision Hooks
    Thermocouple
    Magnetic Hanger
    Pouch
    59"Black, Red0000000000000

    Test Lead Sets

    Image of Product. Front orientation. Test Leads. Test Lead Sets, Style A.
    Image of Product. Front orientation. Test Leads. Test Lead Sets, Style B.
    Image of Product. Front orientation. Test Leads. Test Lead Sets, Style C.

    Style A

    Style B

    Style C

    Image of Product. Front orientation. Exploded view. Test Leads. Test Lead Sets, Style D.
    Image of Product. Front orientation. Exploded view. Test Leads. Test Lead Sets, Style E.
    Image of Product. Front orientation. Test Leads. Test Lead Sets, Style F.

    Style D

    Style E

    Style F

    Pairs of red and black test leads are ready to connect to a multimeter or other electrical test equipment.
    The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter.
    Style D—Style D come with alligator clips that screw onto the tips for two testing options with one test lead set.
    Style
    Test End
    Connection End
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    Current,
    amp
    Electrical Safety
    Rating
    No. of
    Cords
    Cord
    Lg.
    Color
    Test End Material
    Pair
    APrecision Retractable HookSheathed Standard Banana Plug3003005CAT II, 300V248"Black, RedGold-Plated Copper0000000000000
    BPrecision Retractable HookSheathed Standard Banana Plug3003005CAT II, 300V248"Black, RedGold-Plated Copper000000000000
    CThreaded Needle TipSheathed Standard Banana Plug1,0001,00020CAT II, 1,000V248"Black, RedStainless Steel0000000000000
    DThreaded Needle Tip with Alligator ClipSheathed Standard Banana Plug1,0001,00020CAT II, 300V244"Black, RedStainless Steel000000000000
    ENotched Probe TipSheathed Standard Banana Plug1,0001,00010CAT II, 1,000V248"Black, RedNickel-Plated Brass000000000000
    FPrecision TweezerSheathed Standard Banana Plug30603248"BlackBrass000000000000

    Fluke Multimeter Cases

    Image of Product. Front orientation. Multimeter Cases. Fabric Case.
    Image of Product. Front orientation. Multimeter Cases. Hard Case.
    Image of Product. Front orientation. Multimeter Cases. Leather Case.
    Image of Product. Front orientation. Multimeter Cases. Tool Bag.
    Image of Product. Front orientation. Multimeter Cases. Fabric Holster.

    Fabric Case

    Hard Case

    Leather

    Case

    Tool Bag

    Fabric

    Holster

    Mfr. Model
    No.
    Case Type
    Performance
    For Fluke Model No.
    Each
    C25Fabric Case83V, 87V, 88V, 175, 177, 179, 787, 789, 1577, 15870000000000000
    C35Fabric Case83V, 87V, 113, 233000000000000
    C101Hard Case27 II, 28 II, 83V, 87V, 287, 1577, 1587, T5-600, T5-10000000000000000
    C116Fabric Case233, 287, 289000000000000
    C520ALeather CaseT5-600, T5-1000000000000000
    C550Tool Bag27 II, 28 II, 77IV, 83V, 87V, 114, 115, 116, 117, 175, 177, 179, 233, 287, 289, 324, 355, 373, 374, 376, 381, 787, 789, 1577, 1587, 3000 FC, T5-600, T5-10000000000000000
    CXT170Hard CaseWeatherproof114, 115, 116, 117, 175, 177, 179, 787, 1577, 15870000000000000
    CXT80Hard CaseWeatherproof287, 2890000000000000
    H5Fabric HolsterT5-600, T5-1000000000000000

    Fluke Test Lead Sets

    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number FTPL-1.
    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number TL175.

    Model Number FTPL-1

    Model Number TL175

    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number TL222.
    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number TL224.

    Model Number TL222

    Model Number TL224

    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number TL26A.
    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number TL27.

    Model Number TL26A

    Model Number TL27

    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number TL28A.
    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number TL40.

    Model Number TL28A

    Model Number TL40

    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number TL71.
    Image of Product. Front orientation. Exploded view. Test Leads. Fluke Test Lead Sets, Model Number TL75.

    Model Number TL71

    Model Number TL75

    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number TL76.
    Image of Product. Front orientation. Test Leads. Fluke Test Lead Sets, Model Number TL910.

    Model Number TL76

    Model Number TL910

    Connect to Fluke multimeters with a set of red and black test leads.
    The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter.
    Mfr. Model
    No.
    For Fluke Model No.
    Test End
    Connection End
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    Current,
    amp
    Electrical Safety Rating
    Certification
    No. of
    Cords
    Cord
    Lg.
    Color
    Test End Material
    Pair
    FTPL-1289Notched Threaded Probe TipSheathed Standard Banana Plug1,0001,00010CAT IV, 600VCSA Certified, CSA-US Certified
    248"Black, RedNickel-Plated Brass000000000000000
    TL17577IV, 113, 114, 115, 116, 117, 175, 177, 179, 233, 287, 289Notched Threaded Probe TipSheathed Standard Banana Plug1,0001,00010CAT IV, 600VCSA Certified, CSA-US Certified
    248"Black, RedNickel-Plated Brass0000000000000
    TL22283V, 87V, 787Sheathed Banana PlugSheathed Standard Banana Plug1,0001,00010CAT III, 1,000V; CAT IV, 600VCSA Certified, CSA-US Certified
    260"Black, RedCopper0000000000000
    TL22487V, 107, 179, 233, 287, 3000Sheathed Banana PlugSheathed Standard Banana Plug1,0001,00010CAT III, 1,000V; CAT IV, 600VCSA Certified, CSA-US Certified
    260"Black, RedCopper0000000000000
    TL26A83V, 87V, 88V/A, 107, 179, 287, 289Serrated Alligator ClipSheathed Standard Banana Plug30308CSA Certified, CSA-US Certified
    260"Black, RedNickel-Plated Copper0000000000000
    TL27107, 175, 177, 179, 787Sheathed Banana PlugSheathed Standard Banana Plug1,0001,00010CAT III, 1,000VCSA Certified, CSA-US Certified
    260"Black, RedCopper0000000000000
    TL28A88V/A, 107, 175, 177, 179, 287, 289Serrated Alligator ClipSheathed Standard Banana Plug303010CAT I, 30VCSA Certified, CSA-US Certified
    260"Black, RedCopper0000000000000
    TL4083V, 87V, 88V/A, 287, 289, 787Retractable Probe TipSheathed Standard Banana Plug6006003CAT II, 600VCSA Certified, CSA-US Certified
    248"Black, RedStainless Steel0000000000000
    TL7127 II, 28 II, 83V, 87V, 88V, 114, 115, 116, 117, 175, 177, 179, 233, 787, 789Notched Probe TipSheathed Standard Banana Plug1,0001,00010CAT IV, 600VCSA Certified, CSA-US Certified
    248"Black, RedNickel-Plated Brass0000000000000
    TL7583V, 87V, 113, 175, 177, 179, 287, 289, 787, 789Notched Probe TipSheathed Standard Banana Plug1,0001,00010CAT IV, 600VCSA Certified, CSA-US Certified
    248"Black, RedNickel-Plated Brass0000000000000
    TL7687V, 107, 179, 287, 289, 787Pointed Threaded Probe TipSheathed Standard Banana Plug1,0001,00010CAT II, 1,000VCSA Certified, CSA-US Certified
    248"Black, RedNickel-Plated Brass0000000000000
    TL91083V, 87V, 287, 289, 787Pointed Probe TipSheathed Standard Banana Plug1,0001,0003CAT II, 1,000VCSA Certified, CSA-US Certified
    240"Black, RedGold-Plated Copper0000000000000
    back to top