Designed with a thin, compact housing, these bearings are good for space-constrained applications.

An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

Use these bearings in corrosive environments and under water.

Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

Use these bearings in corrosive environments and under water.

With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

Use these bearings in corrosive environments and under water.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

A split housing means you can remove the top half of these bearings to inspect or repair shafts and components. This reduces downtime and minimizes the risk of damaging surrounding components.

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.