McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    134 Products

    Steel Slotted Oval Head Screws

    Image of Product. Front orientation. Oval Head Screws. Steel Slotted Oval Head Screws.
    Painted to match the color of switches and outlet covers, these are also known as wall plate screws. They have a simple yet effective drive style for light duty tasks. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.
    Length is measured from the top of the bevel.
    Standard—Standard-profile heads are the most common choice for oval head screws.
    Head
    Lg.
    Oval Head
    Profile
    Dia.
    Ht.
    Oval Top
    Ht.
    Threading
    Tensile Strength,
    psi
    Color
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Painted Steel
     
    6-32
    1/2"Standard
    0.262"0.128"0.045"Fully Threaded60,000BrownASME B18.6.31000000000000000
    1/2"Standard
    0.262"0.128"0.045"Fully Threaded60,000IvoryASME B18.6.3100000000000000
    1/2"Standard
    0.262"0.128"0.045"Fully Threaded60,000WhiteASME B18.6.3100000000000000
     

    Stainless Steel Slotted Oval Head Screws

    Image of Product. Front orientation. Oval Head Screws. Stainless Steel Slotted Oval Head Screws.
    The most corrosion-resistant slotted oval head screws we offer. Made of stainless steel, they won't rust or corrode when exposed to moisture and chemicals. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.
    Length is measured from the top of the bevel.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust.
    Standard—Standard-profile heads are the most common choice for oval head screws.
    Undercut—With a head that's about 20% shorter than standard-profile heads, these screws are ideal for fastening thin materials that have shallow countersunk holes. The reduced head height also gives space for more threading along the shaft, so short screws get a strong grip on thin material.
    Head
    Lg.
    Oval Head
    Profile
    Dia.
    Ht.
    Oval Top
    Ht.
    Threading
    Tensile Strength,
    psi
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    4-40
    1/4"Standard
    0.212"0.104"0.037"Fully Threaded80,000ASME B18.6.310000000000000000
    3/8"Standard
    0.212"0.104"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    1/2"Standard
    0.212"0.104"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    3/4"Standard
    0.212"0.104"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
    1"Standard
    0.212"0.104"0.037"Fully Threaded80,000ASME B18.6.31000000000000000
     
    6-32
    1/4"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.31000000000000000
    5/16"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.31000000000000000
    3/8"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.31000000000000000
    7/16"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.31000000000000000
    1/2"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.31000000000000000
    5/8"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.31000000000000000
    3/4"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.31000000000000000
    1"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.31000000000000000
    1 1/4"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.310000000000000000
    1 1/2"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.310000000000000000
    2"Standard
    0.262"0.128"0.045"Fully Threaded80,000ASME B18.6.3500000000000000
     
    8-32
    1/4"Undercut
    0.312"0.123"0.052"Fully Threaded80,000ASME B18.6.310000000000000000
    3/8"Standard
    0.312"0.152"0.052"Fully Threaded80,000ASME B18.6.31000000000000000
    1/2"Standard
    0.312"0.152"0.052"Fully Threaded80,000ASME B18.6.31000000000000000
    3/4"Standard
    0.312"0.152"0.052"Fully Threaded80,000ASME B18.6.31000000000000000
    1"Standard
    0.312"0.152"0.052"Fully Threaded80,000ASME B18.6.31000000000000000
    1 1/4"Standard
    0.312"0.152"0.052"Fully Threaded80,000ASME B18.6.3500000000000000
    1 1/2"Standard
    0.312"0.152"0.052"Fully Threaded80,000ASME B18.6.3500000000000000
     
    10-24
    3/8"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.310000000000000000
    1/2"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.310000000000000000
    5/8"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.3500000000000000
    3/4"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.3500000000000000
    1"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.3500000000000000
    1 1/4"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.35000000000000000
    1 1/2"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.35000000000000000
     
    10-32
    3/8"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.310000000000000000
    1/2"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.310000000000000000
    5/8"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.3500000000000000
    3/4"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.3500000000000000
    1"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.35000000000000000
    1 1/4"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.35000000000000000
    1 1/2"Standard
    0.362"0.176"0.060"Fully Threaded80,000ASME B18.6.35000000000000000
     
    12-24
    3/8"Undercut
    0.412"0.161"0.068"Fully Threaded80,000ASME B18.6.3500000000000000
    1/2"Standard
    0.412"0.200"0.068"Fully Threaded80,000ASME B18.6.3500000000000000
    3/4"Standard
    0.412"0.200"0.068"Fully Threaded80,000ASME B18.6.3500000000000000
    1"Standard
    0.412"0.200"0.068"Fully Threaded80,000ASME B18.6.3250000000000000
    1 1/4"Standard
    0.412"0.200"0.068"Fully Threaded80,000ASME B18.6.3250000000000000
     
    1/4"-20
    1/2"Standard
    0.477"0.232"0.079"Fully Threaded80,000ASME B18.6.3500000000000000
    5/8"Standard
    0.477"0.232"0.079"Fully Threaded80,000ASME B18.6.3500000000000000
    3/4"Standard
    0.477"0.232"0.079"Fully Threaded80,000ASME B18.6.3250000000000000
    1"Standard
    0.477"0.232"0.079"Fully Threaded80,000ASME B18.6.3250000000000000
    1 1/4"Standard
    0.477"0.232"0.079"Fully Threaded80,000ASME B18.6.3250000000000000
    1 1/2"Standard
    0.477"0.232"0.079"Fully Threaded80,000ASME B18.6.3250000000000000
    2"Standard
    0.477"0.232"0.079"Fully Threaded80,000ASME B18.6.3250000000000000
    2 1/2"Standard
    0.477"0.232"0.079"Partially Threaded80,000ASME B18.6.3100000000000000
     
    M3 × 0.5 mm
    5 mmUndercut
    5.60 mm2.40 mm0.75 mmFully Threaded100,000DIN 9641000000000000000
    6 mmUndercut
    5.60 mm2.40 mm0.75 mmFully Threaded100,000DIN 9641000000000000000
    8 mmUndercut
    5.60 mm2.40 mm0.75 mmFully Threaded100,000DIN 9641000000000000000
    10 mmUndercut
    5.60 mm2.40 mm0.75 mmFully Threaded100,000DIN 96410000000000000000
    12 mmUndercut
    5.60 mm2.40 mm0.75 mmFully Threaded100,000DIN 96410000000000000000
     
    M4 × 0.7 mm
    6 mmUndercut
    7.50 mm3.20 mm1.00 mmFully Threaded100,000DIN 9641000000000000000
    8 mmUndercut
    7.50 mm3.20 mm1.00 mmFully Threaded100,000DIN 96410000000000000000
    10 mmUndercut
    7.50 mm3.20 mm1.00 mmFully Threaded100,000DIN 96410000000000000000
    12 mmUndercut
    7.50 mm3.20 mm1.00 mmFully Threaded100,000DIN 96410000000000000000
    16 mmUndercut
    7.50 mm3.20 mm1.00 mmFully Threaded100,000DIN 96410000000000000000
     
    M5 × 0.8 mm
    8 mmUndercut
    9.20 mm3.75 mm1.25 mmFully Threaded100,000DIN 964500000000000000
    10 mmUndercut
    9.20 mm3.75 mm1.25 mmFully Threaded100,000DIN 964500000000000000
    12 mmUndercut
    9.20 mm3.75 mm1.25 mmFully Threaded100,000DIN 9645000000000000000
    16 mmUndercut
    9.20 mm3.75 mm1.25 mmFully Threaded100,000DIN 9645000000000000000
    20 mmUndercut
    9.20 mm3.75 mm1.25 mmFully Threaded100,000DIN 9645000000000000000
     
    M6 × 1 mm
    12 mmUndercut
    11.00 mm4.50 mm1.50 mmFully Threaded100,000DIN 9645000000000000000
    16 mmUndercut
    11.00 mm4.50 mm1.50 mmFully Threaded100,000DIN 9645000000000000000
    20 mmUndercut
    11.00 mm4.50 mm1.50 mmFully Threaded100,000DIN 9645000000000000000
    25 mmUndercut
    11.00 mm4.50 mm1.50 mmFully Threaded100,000DIN 9645000000000000000
    30 mmUndercut
    11.00 mm4.50 mm1.50 mmFully Threaded100,000DIN 9645000000000000000
     
    M8 × 1.25 mm
    16 mmUndercut
    14.50 mm6.00 mm2.00 mmFully Threaded100,000DIN 9642500000000000000
    20 mmUndercut
    14.50 mm6.00 mm2.00 mmFully Threaded100,000DIN 9642500000000000000
    25 mmUndercut
    14.50 mm6.00 mm2.00 mmFully Threaded100,000DIN 9642500000000000000
    30 mmUndercut
    14.50 mm6.00 mm2.00 mmFully Threaded100,000DIN 964100000000000000
     

    Brass Slotted Oval Head Screws

    Image of Product. Front orientation. Oval Head Screws. Brass Slotted Oval Head Screws.
    Conductive and nonmagnetic, these screws are often used to secure electrical equipment, such as circuit boards, inside enclosures. Made of brass, they also resist corrosion in humid environments. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.
    Length is measured from the top of the bevel.
    Standard—Standard-profile heads are the most common choice for oval head screws.
    Undercut—With a head that's about 20% shorter than standard-profile heads, these screws are ideal for fastening thin materials that have shallow countersunk holes. The reduced head height also gives space for more threading along the shaft, so short screws get a strong grip on thin material.
    Head
    Lg.
    Oval Head
    Profile
    Dia.
    Ht.
    Oval Top
    Ht.
    Threading
    Tensile Strength,
    psi
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Brass
     
    4-40
    3/16"Standard
    0.212"0.104"0.037"Fully Threaded50,000ASME B18.6.310000000000000000
    1/4"Standard
    0.212"0.104"0.037"Fully Threaded50,000ASME B18.6.31000000000000000
    5/16"Standard
    0.212"0.104"0.037"Fully Threaded50,000ASME B18.6.31000000000000000
    3/8"Standard
    0.212"0.104"0.037"Fully Threaded50,000ASME B18.6.31000000000000000
    1/2"Standard
    0.212"0.104"0.037"Fully Threaded50,000ASME B18.6.31000000000000000
     
    6-32
    1/4"Standard
    0.262"0.128"0.045"Fully Threaded50,000ASME B18.6.31000000000000000
    5/16"Standard
    0.262"0.128"0.045"Fully Threaded50,000ASME B18.6.310000000000000000
    3/8"Standard
    0.262"0.128"0.045"Fully Threaded50,000ASME B18.6.310000000000000000
    1/2"Standard
    0.262"0.128"0.045"Fully Threaded50,000ASME B18.6.310000000000000000
    3/4"Standard
    0.262"0.128"0.045"Fully Threaded50,000ASME B18.6.310000000000000000
    1"Standard
    0.262"0.128"0.045"Fully Threaded50,000ASME B18.6.35000000000000000
    1 1/4"Standard
    0.262"0.128"0.045"Fully Threaded50,000ASME B18.6.35000000000000000
    1 1/2"Standard
    0.262"0.128"0.045"Fully Threaded50,000ASME B18.6.35000000000000000
     
    8-32
    1/4"Undercut
    0.312"0.123"0.052"Fully Threaded50,000ASME B18.6.310000000000000000
    3/8"Standard
    0.312"0.152"0.052"Fully Threaded50,000ASME B18.6.310000000000000000
    1/2"Standard
    0.312"0.152"0.052"Fully Threaded50,000ASME B18.6.310000000000000000
    5/8"Standard
    0.312"0.152"0.052"Fully Threaded50,000ASME B18.6.35000000000000000
    3/4"Standard
    0.312"0.152"0.052"Fully Threaded50,000ASME B18.6.35000000000000000
    1"Standard
    0.312"0.152"0.052"Fully Threaded50,000ASME B18.6.35000000000000000
     
    10-24
    1/2"Standard
    0.362"0.176"0.060"Fully Threaded50,000ASME B18.6.35000000000000000
    3/4"Standard
    0.362"0.176"0.060"Fully Threaded50,000ASME B18.6.35000000000000000
    1"Standard
    0.362"0.176"0.060"Fully Threaded50,000ASME B18.6.3250000000000000
    1 1/2"Standard
    0.362"0.176"0.060"Fully Threaded50,000ASME B18.6.32500000000000000
     
    10-32
    3/8"Standard
    0.362"0.176"0.060"Fully Threaded50,000ASME B18.6.3500000000000000
    1/2"Standard
    0.362"0.176"0.060"Fully Threaded50,000ASME B18.6.35000000000000000
    5/8"Standard
    0.362"0.176"0.060"Fully Threaded50,000ASME B18.6.3500000000000000
    3/4"Standard
    0.362"0.176"0.060"Fully Threaded50,000ASME B18.6.35000000000000000
    1"Standard
    0.362"0.176"0.060"Fully Threaded50,000ASME B18.6.3250000000000000
    1 1/2"Standard
    0.362"0.176"0.060"Fully Threaded50,000ASME B18.6.3250000000000000
     
    1/4"-20
    1/2"Standard
    0.477"0.232"0.079"Fully Threaded50,000ASME B18.6.32500000000000000
    3/4"Standard
    0.477"0.232"0.079"Fully Threaded50,000ASME B18.6.32500000000000000
    1"Standard
    0.477"0.232"0.079"Fully Threaded50,000ASME B18.6.32500000000000000
    1 1/2"Standard
    0.477"0.232"0.079"Fully Threaded50,000ASME B18.6.3100000000000000
     
    M3 × 0.5 mm
    5 mmStandard
    5.60 mm2.40 mm0.75 mmFully Threaded50,000DIN 964, ISO 201010000000000000000
    6 mmStandard
    5.60 mm2.40 mm0.75 mmFully Threaded50,000DIN 964, ISO 201010000000000000000
    8 mmStandard
    5.60 mm2.40 mm0.75 mmFully Threaded50,000DIN 964, ISO 201010000000000000000
    10 mmStandard
    5.60 mm2.40 mm0.75 mmFully Threaded50,000DIN 964, ISO 201010000000000000000
    12 mmStandard
    5.60 mm2.40 mm0.75 mmFully Threaded50,000DIN 964, ISO 201010000000000000000
     
    M4 × 0.7 mm
    6 mmStandard
    7.50 mm3.20 mm1.00 mmFully Threaded50,000DIN 964, ISO 201010000000000000000
    8 mmStandard
    7.50 mm3.20 mm1.00 mmFully Threaded50,000DIN 964, ISO 201010000000000000000
    10 mmStandard
    7.50 mm3.20 mm1.00 mmFully Threaded50,000DIN 964, ISO 201010000000000000000
    12 mmStandard
    7.50 mm3.20 mm1.00 mmFully Threaded50,000DIN 964, ISO 2010500000000000000
    16 mmStandard
    7.50 mm3.20 mm1.00 mmFully Threaded50,000DIN 964, ISO 2010500000000000000
     
    M5 × 0.8 mm
    8 mmStandard
    9.20 mm3.75 mm1.25 mmFully Threaded50,000DIN 964, ISO 2010500000000000000
    10 mmStandard
    9.20 mm3.75 mm1.25 mmFully Threaded50,000DIN 964, ISO 2010500000000000000
    12 mmStandard
    9.20 mm3.75 mm1.25 mmFully Threaded50,000DIN 964, ISO 20105000000000000000
    16 mmStandard
    9.20 mm3.75 mm1.25 mmFully Threaded50,000DIN 964, ISO 20105000000000000000
    20 mmStandard
    9.20 mm3.75 mm1.25 mmFully Threaded50,000DIN 964, ISO 2010250000000000000
     
    M6 × 1 mm
    12 mmStandard
    11.00 mm4.50 mm1.50 mmFully Threaded50,000DIN 964, ISO 2010250000000000000
    16 mmStandard
    11.00 mm4.50 mm1.50 mmFully Threaded50,000DIN 964, ISO 2010250000000000000
    20 mmStandard
    11.00 mm4.50 mm1.50 mmFully Threaded50,000DIN 964, ISO 20102500000000000000
    25 mmStandard
    11.00 mm4.50 mm1.50 mmFully Threaded50,000DIN 964, ISO 20102500000000000000
    30 mmStandard
    11.00 mm4.50 mm1.50 mmFully Threaded50,000DIN 964, ISO 20102500000000000000
     
    M8 × 1.25 mm
    16 mmStandard
    14.50 mm6.00 mm2.00 mmFully Threaded50,000DIN 964, ISO 2010100000000000000
    20 mmStandard
    14.50 mm6.00 mm2.00 mmFully Threaded50,000DIN 964, ISO 2010100000000000000
    25 mmStandard
    14.50 mm6.00 mm2.00 mmFully Threaded50,000DIN 964, ISO 20101000000000000000
    30 mmStandard
    14.50 mm6.00 mm2.00 mmFully Threaded50,000DIN 964, ISO 20101000000000000000
     
    back to top