Warding Files | McMaster-Carr

Filter by

Shape

Length

File Shape

File Cut Number

Thickness

For Use On

Grit Rating

Width

File Pattern

Sold As

File Type

Face Tooth Style

Number of Pieces

Edge Tooth Style

REACH

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Face Shape

Handle Material

Material

Container Type

Pouch with Zipper Closure

Minimum Grit

Edge Style

Maximum Grit

90 Products

Precision Rectangular Files


	Double-Cut Face	Single-Cut Edge

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Thin-Tapered Rectangle

Thin-Tapered

Rectangle

Thin tapered files taper extremely toward the point to fit tight spaces. Also known as warding files.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Coarse Finish (No. 00)		For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each		Each
Double Cut Flat Face







				Rigid

				4"	31/64"	3/64"	Flat Single Cut	Steel, Iron	4259A15	000000	4259A16	000000	———	0	4259A31	000000


				4"	33/64"	3/32"	Flat Single Cut	Steel, Iron	———	0	———	0	4259A17	000000	———	0
				6"	5/8"	5/64"	Flat Single Cut	Steel, Iron	4259A18	00000	4259A32	00000	4259A33	00000	4259A34	00000
				8"	7/8"	11/64"	Flat Single Cut	Steel, Iron	4259A35	00000	4259A24	00000	4259A25	00000	———	0

Needle Files

The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Straight Rectangle

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Double Cut







				Rigid

				3 1/4"	0.213"	0.047"	Single Cut	Steel, Iron	4261A57	000000	4261A58	000000	4261A59	000000

Tapered Rectangle

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Double Cut







				Rigid

				3 1/4"	0.215"	0.047"	Single Cut	Steel, Iron	4261A35	000000	4261A36	000000	———	0


				3 1/2"	0.215"	0.047"	Single Cut	Steel, Iron	———	0	———	0	4261A37	000000

Tapered Half Round

Half-round files can be used on concave, convex, and flat surfaces.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each		Each		Each
Double Cut Round Face × Double Cut Flat Face







				Rigid

				3 1/4"	0.22"	0.069"	Steel, Iron	4261A31	000000	4261A32	000000	4261A33	000000

Tapered Round

Round files are good for filing holes and concave surfaces.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

				For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Dia.	For Use On		Each		Each		Each
Double Cut







				Rigid

				3 1/4"	0.115"	Steel, Iron	4261A26	000000	4261A27	000000	4261A28	000000

Tapered Triangle

Triangular files have three filing surfaces to work in spots others can't.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

				For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	For Use On		Each		Each		Each
Double Cut







				Rigid

				2 1/4"	0.083"	Steel, Iron	———	0	———	0	4261A55	000000


				3 1/4"	0.154"	Steel, Iron	4261A53	000000	4261A54	000000	———	0

Tapered Square

Square files are good for slots, keyways, grooves, and corners.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

				For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	For Use On		Each		Each		Each
Double Cut







				Rigid

				3"	0.094"	Steel, Iron	———	0	———	0	4261A51	000000


				3 1/4"	0.094"	Steel, Iron	———	0	4261A49	000000	———	0
				3 1/2"	0.094"	Steel, Iron	4261A48	000000	———	0	———	0

Tapered Knife

Knife files get into tight angles, corners, and slots.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Medium Finish (No. 0)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each
Double Cut







				Rigid

				3"	0.213"	0.059"	Single Cut Knife Edge × Thick Edge Without Teeth	Steel, Iron	———	0	4261A46	000000


				3 1/4"	0.213"	0.059"	Single Cut Knife Edge × Thick Edge Without Teeth	Steel, Iron	4261A44	000000	———	0

Tapered Barrette

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish (No. 0)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each		Each
Double Cut × Without Teeth × Without Teeth







				Rigid

				3"	0.201"	0.071"	Steel, Iron	———	0	4261A64	000000


				3 1/4"	0.201"	0.071"	Steel, Iron	4261A62	000000	———	0

Tapered Crossing

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each
Double Cut







				Rigid

				3 1/2"	0.201"	0.079"	Steel, Iron	4261A42	000000

Straight Joint

Double-Cut Edge—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

						For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Without Teeth







				Rigid

				3"	0.209"	0.051"	Double Cut × Double Cut	Steel, Iron	4261A66	000000	4261A67	000000	4261A68	000000

Straight Slitting

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each		Each		Each
Double Cut







				Rigid

				3"	0.236"	0.086"	Steel, Iron	———	0	4261A74	000000	4261A73	000000


				3 1/4"	0.236"	0.086"	Steel, Iron	4261A71	000000	———	0	———	0

Tapered Marking

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each		Each		Each
Double Cut × None







				Rigid

				3"	0.209"	0.071"	Steel, Iron	4261A75	000000	4261A76	000000	4261A77	000000

Rectangular Files


	Double-Cut Face

Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Thin-Tapered Rectangle

Thin-Tapered

Rectangle

Thin tapered files taper more extremely toward the point than tapered files. They are often used to make notches in keys. Also known as warding files.

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

						For Coarse Finish		For Medium Finish		For Fine Finish
	Lg.	Wd.	Thk.	Edge Tooth Style	For Use On		Each		Each		Each
Double Cut Flat Face







				Rigid

				4"	7/16"	1/16"	Flat Single Cut × Flat Single Cut	Steel, Iron	4230A11	000000	4230A21	000000	4230A31	000000


				6"	5/8"	1/16"	Flat Single Cut × Flat Single Cut	Steel, Iron	4230A12	00000	4230A22	00000	4230A32	00000
				8"	3/4"	1/16"	Flat Single Cut × Flat Single Cut	Steel, Iron	4230A13	00000	4230A23	00000	4230A33	00000

File Sets

Keep multiple files on hand for workpieces of different shapes and sizes.

All sets include American-pattern files, also known as machinists' files.

Don't see the set you need? Create your own with a tool roll and individual files.

6 Pieces


Rectangle	Half Round

Round	Triangle

Square

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

Wood Handle—Files with wood handles have a durable grip that's shaped to fit comfortably in your hand.

Length—For files without handles, length does not include the tang.

	Wd.	Face Tooth Style	File Pattern	Handle Material	Container Type	For Use On		Each
Rectangle, Half Round, Round, Triangle, and Square—For Fine Finish



	4"	3/16", 1/4", 7/16", 1/2"	Double Cut, Single Cut	American	—	Canvas Roll-Up Pouch	Steel, Iron	8192A11	000000


	4"	3/16", 1/4", 7/16", 1/2"	Double Cut, Single Cut	American	Wood	Canvas Roll-Up Pouch	Steel, Iron	8192A12	00000

Precision File Sets

Made to exacting measurements, the files in these sets give you precise control over how much material you remove. Also known as Swiss-pattern files, they create more consistent finishes than American-pattern files. Use them for smoothing intricate parts and other applications where accuracy is key. All files are double cut, which means their surface has two sets of diagonal teeth. They remove material more quickly than single cut files, but you’ll need to use heavier pressure.

6 Pieces


Straight Rectangle	Thin-Tapered Rectangle

Half Round	Round

Straight Triangle	Straight Knife

File Cut No.	Includes	File Shape	Container Type	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces—6" Lg. One Medium-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—6" Lg. One Medium-Finish Triangular File with Double-Cut Faces—6" Lg. One Medium-Finish Knife File with Double-Cut Faces—6" Lg.	Straight Rectangle Thin-Tapered Rectangle Tapered Half Round Tapered Round Straight Triangle Straight Knife	Plastic Pouch	Steel, Iron	42365A21	0000000
2	One Fine-Finish Rectangular File with Double-Cut Faces—6" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—6" Lg. One Fine-Finish Triangular File with Double-Cut Faces—6" Lg. One Fine-Finish Knife File with Double-Cut Faces—6" Lg.	Straight Rectangle Thin-Tapered Rectangle Tapered Half Round Tapered Round Straight Triangle Straight Knife	Plastic Pouch	Steel, Iron	42365A22	000000
4	One Extra Fine-Finish Rectangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Tapered Round File with Double-Cut Face—6" Lg. One Extra Fine-Finish Triangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Knife File with Double-Cut Faces—6" Lg.	Straight Rectangle Thin-Tapered Rectangle Tapered Half Round Tapered Round Straight Triangle Straight Knife	Plastic Pouch	Steel, Iron	42365A23	000000

Economy Needle File Sets

These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length includes the tang.

6 Pieces—5 1/2" Long


Straight Rectangle	Tapered Rectangle

Half Round	Round

Triangle	Square

File Cut No.	Includes	File Shape	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A52	00000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A53	0000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A54	0000

6 Pieces—6 1/4" Long


Straight Rectangle	Tapered Rectangle

Half Round	Round

Triangle	Square

File Cut No.	Includes	File Shape	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A55	00000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A56	0000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Steel, Iron	8174A57	0000

12 Pieces—5 1/2" Long

Image of Product. Front orientation. Files. Economy Needle File Sets, 12 Pieces.


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

File Cut No.	Includes	File Shape	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A41	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A42	00000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A51	00000

12 Pieces—6 1/4" Long


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

File Cut No.	Includes	File Shape	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A45	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A46	00000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A47	00000

Needle File Sets

The files in these sets have small tips for precise work in tight spots. They stand up to frequent use. All are Swiss pattern, so they’re made to exacting measurements to give you control over how much material you remove. They produce more consistent finishes than American-pattern files. File length does not include the length of the tang or handle.

6 Piece Sets with Rubber-Coated Plastic Handle


Straight Rectangle	Tapered Rectangle

Half Round	Round

Triangle	Square

Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.

Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.

	Includes	File Shape	Face Tooth Style	Container Type	For Use On		Each
5 1/2" Long



	2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.058" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.06" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.075" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.117" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.15" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.11" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Double Cut	Plastic Case	Steel, Iron	4261A13	000000

12 Piece Sets without Handle


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

Files without handles have a tang, so you can choose your own handle.

Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.

	Includes	File Shape	Face Tooth Style	Container Type	For Use On		Each
4" Long



	0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg. × 0.148" Wd. × 0.052" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A11	0000000


	2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A12	000000


	5 1/2" Long



			0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A16	000000


			2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A17	000000
			4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A18	000000


			6 1/4" Long



					0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A22	000000


					2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A23	000000
					4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A24	000000
					6	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A25	000000

12 Piece Sets with Rubber-Coated Plastic Handle


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.

Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.

Single-Cut Face—Single-cut files are often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

	Includes	File Shape	Face Tooth Style	Container Type	For Use On		Each
5 1/2" Long



	0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Medium-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A14	0000000


	2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick. One Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A15	000000
	4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick. One Extra-Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" T One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A21	000000


	6 1/4" Long



			0	One Medium-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Medium-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A311	000000


			2	One Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A312	000000
			4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Extra-Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thi One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A313	000000

Diamond Needle Files

The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tip allows precise work in tight spots.

Thin-Tapered Rectangle

Thin-Tapered

Rectangle

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Wd.	Thk.	For Use On		Each		Each		Each







			Rigid

			2.75"	5 1/2"	0.205"	0.055"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4279A43	000000	4279A42	000000	4279A41	000000

Needle File Sets for Stainless Steel

Keep different shapes of needle files on hand to remove material from stainless steel. The files in these sets almost never clog. Their small tip is ideal for work in slots, grooves, and other tight spots on intricate parts. With a Swiss cut pattern, they’ll leave a consistent finish—they’re made to more exact measurements than files with an American cut pattern. Since they’re double cut with two sets of diagonal teeth, you can put more pressure on them than single-cut files for quicker filing. All files resist corrosion.

The files in these sets do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

6 Pieces—3 1/2" Long


Rectangle	Half Round	Round

Triangle	Square	Barrette

File Cut No.	Includes	File Shape		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Double-Cut Edges—3 1/2" Lg. × 15/64" Wd. × 1/16" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—3 1/2" Lg. × 15/64" Wd. × 5/64" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—3 1/2" Lg. × 9/64" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—3 1/2" Lg. × 5/32" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—3 1/2" Lg. × 7/64" Wd. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—3 1/2" Lg. × 7/32" Wd. × 3/32" Thick.	Straight Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Barrette	8071N101	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Double-Cut Edges—3 1/2" Lg. × 15/64" Wd. × 1/16" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—3 1/2" Lg. × 15/64" Wd. × 5/64" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—3 1/2" Lg. × 9/64" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—3 1/2" Lg. × 5/32" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—3 1/2" Lg. × 7/64" Wd. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—3 1/2" Lg. × 7/32" Wd. × 3/32" Thick.	Straight Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Barrette	8071N102	00000