One-Step Hammer-Driven Gasket and Washer Punch Sets
Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.
Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Aluminum, Cork, Fabric, Leather, Plastic, Rubber | |||||
---|---|---|---|---|---|
10 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" | Steel | Plastic Case | 00000000 | 0000000 |
10 Punches, Handle | 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm | Steel | Plastic Case | 00000000 | 000000 |
15 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16" | Steel | Plastic Case | 00000000 | 000000 |
15 Punches, Handle | 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm | Steel | Plastic Case | 00000000 | 000000 |
25 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 7/8", 2" | Steel | Plastic Case | 00000000 | 000000 |
29 Punches, Handle | 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm, 44mm, 46mm, 48mm, 50mm | Steel | Plastic Case | 00000000 | 000000 |
For Hole Dia. | Material | Each | |
1/8" | Steel | 00000000 | 000000 |
3/16" | Steel | 00000000 | 00000 |
1/4" | Steel | 00000000 | 00000 |
5/16" | Steel | 00000000 | 00000 |
3/8" | Steel | 00000000 | 00000 |
7/16" | Steel | 00000000 | 00000 |
1/2" | Steel | 00000000 | 00000 |
9/16" | Steel | 00000000 | 00000 |
5/8" | Steel | 00000000 | 00000 |
3/4" | Steel | 00000000 | 00000 |
7/8" | Steel | 00000000 | 00000 |
1" | Steel | 00000000 | 00000 |
1 1/16" | Steel | 00000000 | 00000 |
1 1/8" | Steel | 00000000 | 00000 |
1 3/16" | Steel | 00000000 | 00000 |
1 1/4" | Steel | 00000000 | 00000 |
1 5/16" | Steel | 00000000 | 00000 |
1 3/8" | Steel | 00000000 | 00000 |
1 7/16" | Steel | 00000000 | 00000 |
1 1/2" | Steel | 00000000 | 00000 |
1 5/8" | Steel | 00000000 | 00000 |
1 11/16" | Steel | 00000000 | 00000 |
1 3/4" | Steel | 00000000 | 00000 |
1 7/8" | Steel | 00000000 | 00000 |
2" | Steel | 00000000 | 00000 |
2mm | Steel | 000000000 | 00000 |
3mm | Steel | 000000000 | 00000 |
4mm | Steel | 000000000 | 00000 |
5mm | Steel | 000000000 | 00000 |
6mm | Steel | 00000000 | 00000 |
8mm | Steel | 00000000 | 00000 |
10mm | Steel | 00000000 | 00000 |
12mm | Steel | 00000000 | 00000 |
14mm | Steel | 00000000 | 00000 |
16mm | Steel | 00000000 | 00000 |
18mm | Steel | 00000000 | 00000 |
20mm | Steel | 00000000 | 00000 |
22mm | Steel | 000000000 | 00000 |
24mm | Steel | 000000000 | 00000 |
26mm | Steel | 000000000 | 00000 |
28mm | Steel | 000000000 | 00000 |
30mm | Steel | 000000000 | 00000 |
32mm | Steel | 000000000 | 00000 |
34mm | Steel | 000000000 | 00000 |
36mm | Steel | 000000000 | 00000 |
38mm | Steel | 000000000 | 00000 |
40mm | Steel | 00000000 | 00000 |
42mm | Steel | 000000000 | 00000 |
44mm | Steel | 000000000 | 00000 |
46mm | Steel | 00000000 | 00000 |
48mm | Steel | 000000000 | 00000 |
50mm | Steel | 000000000 | 00000 |
Economy Hammer-Driven Gasket and Washer Punch Sets
This set includes common ID and OD sizes to create gaskets and washers in two strikes.
For technical drawings and 3-D models, click on a part number.
Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Brass, Cork, Fabric, Leather, Plastic, Rubber | |||||
---|---|---|---|---|---|
10 Punches, Handle | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" | Steel | Plastic Case | 0000000 | 000000 |
Quick-Release Hammer-Driven Gasket and Washer Punch Sets
Quickly switch between inner and outer punches to create washers faster than with standard sets.
For technical drawings and 3-D models, click on a part number.
Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Cork, Fabric, Fiberglass, Leather, Plastic, Rubber | |||||
---|---|---|---|---|---|
7 Punches, Centering Pin, Handle, Punch Cutting Pad | 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" | Steel | Plastic Case | 0000000 | 0000000 |
13 Punches, Centering Pin, Handle, Punch Cutting Pad | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" | Steel | Plastic Case | 0000000 | 000000 |
Self-Aligning Hammer-Driven Gasket and Washer Punch Sets for Thin Materials
For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.
Includes | For Hole Dia. | Pilot Dia. | For Max. Steel Thick. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Cork, Fiberglass, Iron, Leather, Plastic, Rubber, Stainless Steel, Steel | |||||||
---|---|---|---|---|---|---|---|
4 Punches, 4 Pilots | 7/8", 1", 1 1/8", 1 1/4" | 3/4", 7/8", 1", 1 1/8" | 1/64" | Steel | Plastic Case | 0000000 | 0000000 |
9 Punches, 8 Pilots | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" | 1/64" | Steel | Plastic Case | 0000000 | 000000 |
10 Punches, 9 Pilots | 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 16mm, 20mm | 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 16mm | 0.6mm | Steel | Plastic Case | 0000000 | 000000 |
Hammer-Driven Gasket and Washer Punch Sets for Thin Materials
Slide thin sheets of material into the included die block then punch an inner and outer hole to create a shim or washer.
Includes | For Hole Dia. | For Max. Steel Thick. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Cork, Fabric, Fiberglass, Iron, Leather, Plastic, Rubber, Stainless Steel, Steel | ||||||
---|---|---|---|---|---|---|
9 Punches | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" | 1/64" | Steel | Plastic Case | 0000000 | 0000000 |
9 Punches | 3.5mm, 5mm, 7mm, 8.5mm, 10mm, 11.5mm, 13.5mm, 16.5mm, 19.5mm | 0.6mm | Steel | Plastic Case | 0000000 | 000000 |
Circular Gasket Cutters
Cut soft materials such as PTFE, fiber, rubber, and cork.
Styles A & B simultaneously cut inside and outside diameters.
Cutting Dia. | For Max. Thick. | Shank | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | PTFE | Graphite | Fiber | Rubber | Cork | Size | Shape | Lg. | Each | |
5/8" | 6 1/2" | 1/4" | 1/4" | 1/4" | 1/4" | 1/4" | 5/16" | Square | 6 1/2" | 00000000 | 000000 |
Precise-Cut Circular Gasket Cutters with Cutting Board
Ensure precise cuts with a measuring scale and adjustable blade depth. A rectangular base keeps material flat during cutting to prevent tears. The cutting board reseals itself after each cut.
Style A cutter also cuts strips up to 3 5/8" wide.
Pointed blades are for general purpose cutting.
Rounded-tip blades are for heavy duty cutting.
Curved blades are for cutting thin materials.
Angled-tip blades are for cutting rigid materials.
Bolt-hole locator finds the center point of any size hole.
Dovetail cutting template is for cutting circular gaskets in sections held together by dovetail cutouts.
Optional extension arms are for cutting larger diameter gaskets with Style C.
Cutting Dia. | For Max. Thick. | Cutting Board | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | Max. Cutting Wd. | PTFE | Graphite | Fiber | Rubber | Cork | Cutting Pattern | Blade Material | Body Material | Ruler System of Measurement | Lg. | Wd. | Center Pin Lg. | Each | |
1/4" | 6" | 3 5/8" | 3/4" | 3/4" | 3/4" | 3/4" | 3/4" | Circle, Straight | Steel | Plastic | Inch, Metric | 6" | 6" | 1 3/16", 1 5/16" | 0000000 | 0000000 |
Cutting Dia. | For Max. Thick. | Cutting Board | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | PTFE | Graphite | Fiber | Rubber | Cork | Cutting Pattern | Blade Material | Body Material | Ruler System of Measurement | Lg. | Wd. | Center Pin Lg. | Each | |
1/4" | 25" | 3/4" | 3/4" | 3/4" | 3/4" | 3/4" | Circle | Steel | Brass | Inch | 18" | 18" | 1 3/16", 1 7/16", 1 11/16" | 0000000 | 0000000 |
1/4" | 37" | 3/4" | 3/4" | 3/4" | 3/4" | 3/4" | Circle | Steel | Brass | Inch | 18" | 18" | 1 3/16", 1 7/16", 1 11/16" | 0000000 | 000000 |
Cutting Dia. | For Max. Thick. | Cutting Board | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | PTFE | Graphite | Fiber | Rubber | Cork | Cutting Pattern | Blade Material | Body Material | Ruler System of Measurement | Lg. | Wd. | Center Pin Lg. | Each | |
1" | 37" | 3/4" | 3/4" | 3/4" | 3/4" | 3/4" | Circle | Steel | Plastic | Inch, Metric | 18" | 18" | 1 3/16", 1 7/16", 1 11/16" | 0000000 | 0000000 |
Each | ||
For C—37" to 49" Cutting Dia. Extension Arm | 000000 | 000000 |
Fast-Cut Circular Gasket Cutters
Turn the handle to make quick and accurate circular cuts.
Cutting Dia. | For Max. Thick. | ||||||||
---|---|---|---|---|---|---|---|---|---|
Min. | Max. | PTFE | Fiber | Rubber | Cork | Blade Material | Body Material | Each | |
2" | 22" | 1/8" | 3/16" | 3/16" | 3/16" | Steel | Cast Iron, Steel | 000000 | 0000000 |
Cutting Dia. | For Max. Thick. | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | PTFE | Fiber | Rubber | Cork | Steel | Iron | Steel | Brass | Copper | Monel | Tin | Zinc | Blade Material | Body Material | Each | |
3" | 28" | 1/8" | 3/16" | 3/16" | 1/4" | 0.04" | 0.04" | 0.03" | 0.04" | 1/16" | 0.03" | 0.04" | 0.04" | Steel | Cast Iron, Steel | 000000 | 000000000 |
Utility-Knife Style Circular Gasket and Hole Cutters
When the blade gets dull, snap it off to expose a new, sharp edge. This cutter has a utility knife mounted on a radius bar for precise cuts.