Black Phosphate Washers | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Magnetic Properties Magnetic Properties

Magnetic

	Thrust Load Capacity Thrust Load Capacity

Less than 10,000 lbs.

10,000 to 19,999 lbs.

20,000 to 99,999 lbs.

100,000 to 199,999 lbs.

200,000 lbs. or greater

Not Rated

	OD OD

	ID ID

	Spring Lock Washer Shape Spring Lock Washer Shape

	Conical

	Thread Size Thread Size

866 Products

Metric Spring Lock Washers

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

Fastener Assortments

External, Internal, and Side-Mount
Retaining Ring Assortments

These assortments include pliers to install external and internal rings.

Side-Mount External Retaining Ring Assortments

Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface.

External Retaining Ring Assortments

Pull these rings open with retaining ring pliers, pass over the end of a shaft, and release to spring into a groove.

External and Side-Mount Retaining Ring Assortments

Assortments include pliers to install external rings.

Internal Retaining Ring Assortments

Pull ring ends together with retaining ring pliers and place into the bore of a shaft or housing.

External Push Ring Assortments

Internal Push Ring Assortments

External Retaining Rings

Open these rings, pass them over the end of a shaft, and release to spring into the groove.

Heavy Duty External Retaining Rings

Thicker than standard external retaining rings, these rings withstand greater force.

Inverted External Retaining Rings

For a smooth profile and better clearance than standard external retaining rings, the lugs on these rings point inward.

Self-Locking External Retaining Rings

No groove is required for these rings—their thick profile helps them grip the shaft.

Bowed External Retaining Rings

The curved design of these rings works like a spring, taking up play for a tight hold.

Push-On External Retaining Rings

No groove required—press these rings onto the end of a shaft for a firm grip.

Rectangular Push-On External Retaining Rings

Also known as flat-style speed nuts, these have a large surface to distribute loads better than standard and flanged external push rings.

Side-Mount External Retaining Rings

Also known as E-style rings.

Heavy Duty Side-Mount External Retaining Rings

These rings are reinforced to withstand faster rotation than other side‐mount retaining rings. Also known as reinforced E‐style rings.

Low-Clearance Side-Mount External Retaining Rings

Also known as C-style and crescent rings, these rings have a small shoulder to fit in tight spaces.

Wide-Grip Side-Mount External Retaining Rings

Also known as poodle rings, these thick rings have "ears" that form a large retaining surface to withstand stronger forces than other side-mount retaining rings.

Bowed Side-Mount External Retaining Rings

Also known as bowed E-style rings, these have a curved design that works like a spring, taking up play for a tight hold.

Low-Clearance External Retaining Rings

Also known as constant-section rings, these rings have open ends and a profile that does not taper like other external retaining rings. Use them with linear bearings on support rail shafts.

Clip-On External Retaining Rings

Slide these rings into a groove near the end of the shaft and the tab locks them in place.

Internal Retaining Rings

Squeeze these rings to place them in the groove inside a bore or housing.

Internal Teeth Retaining Rings

With teeth along the inside, these retaining rings hold chamfered shafts inside the housing of your equipment.

Bowed Internal Retaining Rings

The curved design of these rings works like a spring, taking up play for a tight hold.

Inverted Internal Retaining Rings

For a smooth bore and better clearance than standard internal retaining rings, the lugs on these rings face outward.

Heavy-Duty Internal Retaining Rings

Thicker and stronger than standard internal retaining rings, these withstand greater thrust loads.

Push-On Internal Retaining Rings

No groove required—these rings have teeth that firmly grip the bore.

Nuts

Round Push Nuts

With flexible teeth that slide smoothly over threads of any pitch, these push nuts can be used alone for light-duty applications or as a jam nut.

Metric Round Push Nuts

These metric push nuts can be used as a standalone for light-duty applications or as a jam nut.

Rectangular Push Nuts

Also known as flat-style speed nuts, these have large sides, so they're easy to push over threads by hand.

Rectangular Push Nuts for Tapping Screws