Snap-In Captive Panel Screws


Snap these screws into panels up to 0.125" thick—no tools are required for installation. Screws have a built-in retainer and become a part of the panel when installed, so they won't fall out and get lost. They're often used with surface mount nuts.
Screws with black powder-coated heads blend in with dark surfaces and aren’t reflective. They’re often used in dashboards, cockpits, or military equipment where glare is a concern.
For Outer Panel | Black Powder-Coated Aluminum Head | ||||||
---|---|---|---|---|---|---|---|
Thick. | Hole Dia. | Head Dia. | Head Ht. | Lg. | Screw Material | Each | |
Aluminum Body | |||||||
6-32 | |||||||
0.02" to 0.039" | 0.25" | 0.45" | 0.42" | 0.22" | 400 Series Stainless Steel | 000000000 | 00000 |
0.02" to 0.039" | 0.25" | 0.45" | 0.42" | 0.28" | 400 Series Stainless Steel | 000000000 | 0000 |
0.02" to 0.039" | 0.25" | 0.45" | 0.42" | 0.41" | 400 Series Stainless Steel | 000000000 | 0000 |
0.039" to 0.063" | 0.25" | 0.45" | 0.42" | 0.29" | 400 Series Stainless Steel | 000000000 | 0000 |
0.039" to 0.063" | 0.25" | 0.45" | 0.42" | 0.35" | 400 Series Stainless Steel | 000000000 | 0000 |
0.039" to 0.063" | 0.25" | 0.45" | 0.42" | 0.41" | 400 Series Stainless Steel | 000000000 | 0000 |
8-32 | |||||||
0.039" to 0.063" | 0.25" | 0.51" | 0.44" | 0.35" | 400 Series Stainless Steel | 000000000 | 0000 |
0.063" to 0.098" | 0.25" | 0.51" | 0.44" | 0.35" | 400 Series Stainless Steel | 000000000 | 0000 |
0.063" to 0.098" | 0.25" | 0.51" | 0.44" | 0.41" | 400 Series Stainless Steel | 000000000 | 0000 |
0.098" to 0.125" | 0.25" | 0.51" | 0.44" | 0.41" | 400 Series Stainless Steel | 000000000 | 0000 |
10-32 | |||||||
0.039" to 0.063" | 0.25" | 0.51" | 0.44" | 0.41" | 400 Series Stainless Steel | 000000000 | 0000 |
0.063" to 0.098" | 0.25" | 0.51" | 0.44" | 0.35" | 400 Series Stainless Steel | 000000000 | 0000 |
0.063" to 0.098" | 0.25" | 0.51" | 0.44" | 0.41" | 400 Series Stainless Steel | 000000000 | 0000 |
0.098" to 0.125" | 0.25" | 0.51" | 0.44" | 0.41" | 400 Series Stainless Steel | 000000000 | 0000 |
M3.5 × 0.6 mm | |||||||
0.5mm to 1mm | 6.4mm | 11.5mm | 10.6mm | 5.6mm | 400 Series Stainless Steel | 000000000 | 0000 |
1mm to 1.6mm | 6.4mm | 11.5mm | 10.6mm | 10.4mm | 400 Series Stainless Steel | 000000000 | 0000 |
M4 × 0.7 mm | |||||||
0.5mm to 1mm | 6.4mm | 13mm | 11.3mm | 5.6mm | 400 Series Stainless Steel | 000000000 | 0000 |
0.5mm to 1mm | 6.4mm | 13mm | 11.3mm | 7.2mm | 400 Series Stainless Steel | 000000000 | 0000 |
0.5mm to 1mm | 6.4mm | 13mm | 11.3mm | 10.4mm | 400 Series Stainless Steel | 000000000 | 0000 |
1mm to 1.6mm | 6.4mm | 13mm | 11.3mm | 7.2mm | 400 Series Stainless Steel | 000000000 | 0000 |
1mm to 1.6mm | 6.4mm | 13mm | 11.3mm | 8.8mm | 400 Series Stainless Steel | 000000000 | 0000 |
1mm to 1.6mm | 6.4mm | 13mm | 11.3mm | 10.4mm | 400 Series Stainless Steel | 000000000 | 0000 |
1.6mm to 2.5mm | 6.4mm | 13mm | 11.3mm | 7.2mm | 400 Series Stainless Steel | 000000000 | 0000 |
1.6mm to 2.5mm | 6.4mm | 13mm | 11.3mm | 8.8mm | 400 Series Stainless Steel | 000000000 | 0000 |
1.6mm to 2.5mm | 6.4mm | 13mm | 11.3mm | 10.4mm | 400 Series Stainless Steel | 000000000 | 0000 |
M5 × 0.8 mm | |||||||
1mm to 1.6mm | 6.4mm | 13mm | 11.3mm | 7.2mm | 400 Series Stainless Steel | 000000000 | 0000 |
1mm to 1.6mm | 6.4mm | 13mm | 11.3mm | 8.8mm | 400 Series Stainless Steel | 000000000 | 0000 |
1mm to 1.6mm | 6.4mm | 13mm | 11.3mm | 10.4mm | 400 Series Stainless Steel | 000000000 | 0000 |
1.6mm to 2.5mm | 6.4mm | 13mm | 11.3mm | 8.8mm | 400 Series Stainless Steel | 000000000 | 0000 |
1.6mm to 2.5mm | 6.4mm | 13mm | 11.3mm | 10.4mm | 400 Series Stainless Steel | 000000000 | 0000 |
Chemical-Resistant Push Brooms for Smooth Surfaces

Plastic bristles resist chemicals. Bristles are flexible to sweep away fine to medium dust and dirt on nonporous surfaces such as tile, wood, linoleum, and smooth concrete.
Bristle | Block | Handle | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Brush Wd. | Lg. | Material | Color | Material | Color | Lg. | Material | Color | Connection Type | Tip Material | Each | |
24" | 3 1/16" | Polyethylene Plastic | Black | Plastic | Black | 60" | Powder-Coated Steel | Black | Threaded | Plastic | 0000000 | 000000 |
Multisurface Push Brooms

For all floor surfaces, these brooms have a mix of stiff bristles for heavy debris and softer bristles for finer debris. Bristles are chemical resistant.
To prevent damage from unnecessary handle twisting, brooms with a clamp brace have a handle that connects to the broom block, while brooms with a threaded handle have a locking bolt that secures the handle in place.
Sit-on-Top Strut Channel Washers

Add hardware to strut channel without having to hold the washer in place or reach inside the channel. Use with hex nuts to connect threaded rod.
Each | Package | ||||||
---|---|---|---|---|---|---|---|
For Rod Dia. | For Strut Channel Ht. | For Strut Channel Wd. | Each | Pkg. Qty. | Pkg. | ||
Green Powder-Coated Steel | |||||||
1/4" | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 0000000 | 00000 | 100 | 0000000 | 0000000 |
3/8" | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 0000000 | 0000 | 100 | 00000000 | 000000 |
1/2" | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 0000000 | 0000 | 100 | 00000000 | 000000 |
Black Powder-Coated Steel | |||||||
1/4" | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 0000000 | 0000 | 100 | 00000000 | 000000 |
3/8" | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 0000000 | 0000 | 100 | 00000000 | 000000 |
1/2" | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 0000000 | 0000 | 100 | 00000000 | 000000 |
Blowguns

These blowguns conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure.
Air Inlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Nozzle Lg. | Air Consumption | Volume | Max. Inlet Pressure, psi | Pipe Size | Thread Type | Gender | Body Material | Nozzle Tip Material | Grip Style | Specifications Met | Each | |
Straight | ||||||||||||
Push-Button Control | ||||||||||||
1/2" | 10 cfm @ 100 psi | Not Rated | 150 | 1/4 | NPT | Female | Powder-Coated Zinc | Brass | Plain | OSHA Compliant 29 CFR 1910.242 | 0000000 | 000000 |
Compressed-Air Blowguns for Large Areas


The most powerful blowguns we offer, these use compressed air to clean and blow debris. They include an adjustable secondary handle that can be mounted anywhere along the nozzle for two-hand operation. Blowguns conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure. Volume (dB) is measured 3 ft. from the blowgun at 100 psi.
Blowguns | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Air Inlet | Repl. Nozzles | |||||||||||
Nozzle Lg. | Air Consumption | Volume, dB | Max. Inlet Pressure, psi | Pipe Size | Thread Type | Gender | Body Material | Nozzle Tip Material | Each | Each | ||
Straight | ||||||||||||
Lever Control | ||||||||||||
24" | 185 cfm @ 100 psi | 121 | 120 | 3/4 | NPT | Female | Powder-Coated Aluminum | Aluminum | 0000000 | 0000000 | 0000000 | 0000000 |
36" | 185 cfm @ 100 psi | 121 | 120 | 3/4 | NPT | Female | Powder-Coated Aluminum | Aluminum | 0000000 | 000000 | 0000000 | 000000 |
48" | 185 cfm @ 100 psi | 121 | 120 | 3/4 | NPT | Female | Powder-Coated Aluminum | Aluminum | 0000000 | 000000 | 0000000 | 000000 |
72" | 185 cfm @ 100 psi | 121 | 120 | 3/4 | NPT | Female | Powder-Coated Aluminum | Aluminum | 0000000 | 000000 | 0000000 | 000000 |
Replacement Secondary Handles | 0000000 | Each | 000000 |
Baskets for Parts Washing Tubs


Mesh Opening | Handle | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Dia. | Lg. | Opening Shape | Material | Lg. | Cap. | Max. Temp. | Material | Appearance | Color | Each | |
13" | 12" | 5" | 1/4" | 1" | Oval | Steel | 7 1/2" | Not Rated | Not Rated | Powder-Coated Steel | Dull | Red | 0000000 | 0000000 |