We will reply to your message within an hour.
More
Use these washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.
Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.
Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.
Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.
Choose these washers for their adherence to strict military standards for material and construction.
SAE washers generally have a smaller ID and OD than USS washers.
Also known as Type B washers, ASME washers are available in narrower and wider diameters than SAE and USS washers.
USS washers generally have a larger ID and OD than SAE washers.
These washers come with a traceable lot number and a physical and chemical test report.
As a screw is tightened, these washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.
As a screw is tightened, these metric washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.
Also known as high-collar lock washers, these metric washers have smaller outside diameters than standard split lock washers to fit neatly under socket head cap screws.
Compared to standard split lock washers, these are thicker and have larger outside diameters.
Open these rings, pass them over the end of a shaft, and release to spring into the groove.
Thicker than standard external retaining rings, these rings withstand greater force.
No groove is required for these rings—their thick profile helps them grip the shaft.
No groove required—press these rings onto the end of a shaft for a firm grip.
Also known as E-style rings.
Also known as C-style and crescent rings, these rings have a small shoulder to fit in tight spaces.
These rings are reinforced to withstand faster rotation than other side‐mount retaining rings. Also known as reinforced E‐style rings.
Squeeze these rings to place them in the groove inside a bore or housing.
Assortments include pliers to install external and internal rings.
Pull these rings open with retaining ring pliers, pass over the end of a shaft, and release to spring into a groove.
Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface.
Pull ring ends together with retaining ring pliers and place into the bore of a shaft or housing.