Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.

When you’ve applied the correct tension, these washers release an orange dye as a visual indicator.

These metric washers can withstand temperatures up to 450° or 500° F without degrading.

The extra-tall sleeve extends into holes to provide more protection than other rolled-collar washers.

With greater diameters and/or thicknesses than general purpose washers, these washers cover oversized holes or act as spacers and levelers. Clipped to fit where standard washers can’t, they won’t rotate when you position the flat edge against a flat surface.

Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers.

Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle.

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

To keep 90° countersunk screws from loosening in vibration applications, the teeth on these washers bite further into the screw head and joint than standard external-tooth lock washers for a more secure hold.

The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.

Bend the tab of these metric lock washers against the flats of a hex nut or bolt head to prevent the fastener and washer from turning and loosening due to vibration, wear, or changes in temperature.

These washers are rated to withstand pressure up to 100 psi.

These washers surpass other rubber washers when it comes to withstanding oil, grease, and fuel.

Also known as crush washers, these compress when tightened to form a tighter, more durable seal than rubber washers. They are commonly used to seal fluids such as oil and fuel.

These leather washers are nonmarring.

Spin these shims onto screw threads to extend the shoulder length.

18-8 stainless steel spacers have good corrosion resistance.