McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    32 Products

    Beveled Washers

    Image of Product. Front orientation. Washers. Beveled Washers.
    The thickest washers we offer, these are often used for heavy duty wood construction, such as docks and bridges. They have a beveled edge combined with a large outer diameter that increases the contact area between the washer and the mounting surface. As a result, these washers distribute pressure more effectively than general purpose ones to prevent the screw head from digging into wood and other soft materials. Also known as Ogee washers.
    Iron
    Corrosion-Resistant Galvanized Cast Iron—These washers combine the strength of iron with the rust resistance of stainless steel. They're an economical alternative to 18-8 stainless steel in wet and outdoor environments, but they won't hold up to salt water and chemicals.
    For Screw
    Size
    ID
    OD
    Thk.
    Pkg.
    Qty.
    Pkg.
    Corrosion-Resistant Galvanized Cast Iron
    1/2"
    		0.625"2.000"0.500"592367A110000000
    5/8"
    		0.736"2.760"0.675"192367A1200000
    3/4"
    		0.890"2.860"0.740"192367A1300000
    7/8"
    		1.000"3.500"0.875"192367A14000000
    1"
    		1.125"4.000"0.906"192367A15000000
    1 1/8"
    		1.250"4.250"1.125"192367A16000000
    1 1/4"
    		1.375"4.500"1.250"192367A17000000
    1 1/2"
    		1.625"5.250"1.500"192367A18000000
     

    Cross-Bracing Washers

    Image of Product. Bottom orientation. Cross-Bracing Washers.
    Connect cross-bracing rods or cables to structural beams. These washers have a curved top surface that lets rods pass through and be secured with a nut at different angles. The flat bottom surface sits flush against structural beams. Washers have a locking tab that keeps them in place when force is applied. They’re also known as hillside washers.
    For Shaft
    Dia.
    Lg.
    Wd.
    Max. Load,
    lb.
    Hardness
    Color
    Features
    Each
    Cast Iron
    3/8"1 3/4"1.188"7,400Not RatedGrayLocking Tab4335N11100000
    1/2"2"1.313"13,500Not RatedGrayLocking Tab4335N1120000
    5/8"2 1/4"1.438"21,500Not RatedGrayLocking Tab4335N1130000
    3/4"2 3/8"1.625"32,000Not RatedGrayLocking Tab4335N1140000
    7/8"2 7/8"1.813"44,000Not RatedGrayLocking Tab4335N1150000
    1"3 1/8"2.000"58,000Not RatedGrayLocking Tab4335N1160000
    1 1/8", 1 1/4"4 13/16"2.438"92,000Not RatedGrayLocking Tab4335N11700000
     
    Galvanized Cast Iron
    1/2"2"1.313"13,500Not RatedGrayLocking Tab4335N1510000
    5/8"2 1/4"1.438"21,500Not RatedGrayLocking Tab4335N1520000
    3/4"2 3/8"1.625"32,000Not RatedGrayLocking Tab4335N1530000
    7/8"2 7/8"1.813"44,000Not RatedGrayLocking Tab4335N1540000
    1"3 1/8"2.000"58,000Not RatedGrayLocking Tab4335N15500000
    1 1/8", 1 1/4"4 13/16"2.438"92,000Not RatedGrayLocking Tab4335N15600000
     

    Flanged Cross-Bracing Washers

    Image of Product. Bottom orientation. Cross-Bracing Washers. Flanged Cross-Bracing Washers.
    These washers have a flange to spread force across structural beams better than standard washers for cross-bracing rods and cables. Their top surface is curved to let rods pass through and be secured with a nut at different angles. The bottom surface is flat to sit flush with structural beams. These washers have a locking tab that keeps them in place when force is applied. They’re also known as hillside washers.
    Hot-Dipped Galvanized Cast Iron—Hot-dipped galvanized cast iron washers resist corrosion better than primed washers.
    For Shaft
    Dia.
    Lg.
    Wd.
    Max. Load,
    lb.
    Hardness
    Color
    Features
    Each
    Hot-Dipped Galvanized Cast Iron
    1/2", 5/8"4"3.000"16,600Not Rated—Locking Tab4335N11800000
    3/4", 7/8"4"3.000"30,000Not Rated—Locking Tab4335N1220000
    1", 1 1/8"4"3.000"50,500Not Rated—Locking Tab4335N12500000
    1 1/4"4"3.063"92,000Not Rated—Locking Tab4335N12800000
     
    Primed Cast Iron
    1/2", 5/8"4"3.000"16,600Not RatedGrayLocking Tab4335N1190000
    1/2", 5/8"4"3.000"16,600Not RatedRedLocking Tab4335N1210000
    3/4", 7/8"4"3.000"30,000Not RatedGrayLocking Tab4335N1230000
     

    Notched Washers

    Image of Product. Front orientation. Washers. Notched Washers.
    Hammer nails into the notches to prevent these washers from rotating during installation. They have a large outer diameter to distribute pressure over a wide surface area and stop nuts and screws from digging into your material. Washers are versatile enough for a wide variety of wood construction applications, such as beams, joists, and trusses. Also known as No. 10 Western Timber and Victor washers.
    Iron
    Cast Iron—Best for dry environments since moisture will cause these washers to rust.
    For Screw
    Size
    ID
    OD
    Thk.
    Pkg.
    Qty.
    Pkg.
    Cast Iron
    1/2"
    		0.563"2.500"0.250"591153A033000000
    5/8"
    		0.688"2.750"0.313"591153A03500000
    3/4"
    		0.813"3.000"0.438"591153A03600000
    1"
    		1.063"3.750"0.500"191153A03800000
     
    back to top