Zinc Washers | McMaster-Carr

Filter by

Material

System of Measurement

Air Inlet Pipe Size

RoHS Compliance

DFARS Compliance

REACH Compliance

Airflow Pattern

Volume @ Pressure

Nozzle Type

For Use With

Air Inlet Thread Type

Air Inlet Gender

Air Consumption @ Pressure

Maximum Temperature

Overall Length

Maximum Inlet Pressure

Air Inlet Connection

Air Inlet Thread Engagement

Specifications Met

Air Inlet Connection Port

Airflow Adjustability

Air Inlet Threads per Inch

Tip Width

Forward

How can we improve?

40 Products

Vibration-Resistant Captive Panel Screws

An expanding rubber bushing damps vibration while holding panels together. To install, push the threaded end through a hole in the outer panel, slide on the bushing, and tighten the nut. Next, insert the assembly through the inner panel hole and flip the handle to fasten. They become a part of the panel when installed, so they won't fall out and get lost.

For technical drawings and 3-D models, click on a part number.

For Panel Thick.		For Outer Panel Cutout			Handle
Outer	Total	Ht.	Wd.	For Inner Panel Hole Dia.	Lg.	Ht.	Material	Color	Screw Lg.	Bushing Material	Nut Material		Each
Zinc Alloy
0.01" to 0.13"	0.26"	0.161"	0.13"	0.375"	1.09"	0.31"	Nylon Plastic	Black	0.52"	Rubber	Nylon Plastic	000000000	00000

Brush-Style Furniture Grommets

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces. Push them into place.

Zinc alloy grommets are more durable than plastic grommets.

For technical drawings and 3-D models, click on a part number.

Round—Zinc Alloy

Nickel-Plated Zinc Alloy—Dull
	For Hole Dia.	Flange Dia.	Dp. Under Flange	Temp. Range, °F	For Use Outdoors		Each
1	2 3/8"	2 11/16"	15/32"	32° to 390°	No	0000000	000000
1	3 5/32"	3 17/32"	1/2"	32° to 390°	No	0000000	00000
Chrome-Plated Zinc Alloy—Polished
1	2 3/8"	2 11/16"	15/32"	32° to 390°	No	0000000	00000
1	3 5/32"	3 17/32"	1/2"	32° to 390°	No	0000000	00000

Wide-Airflow Bend-and-Stay Air Nozzles

The flat shape distributes air over a wider area than focused-airflow nozzles. These nozzles are attached to a flexible hose that bends and holds its shape until you reposition it. All conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure and OSHA 29 CFR 1910.95 requirements for noise.

For technical drawings and 3-D models, click on a part number.

Air Inlet						Tip
Pipe Size	Thread Type	Gender	Air Consumption	Max. Temp., °F	Volume	Wd.	Thick.	O'all Lg.	Max. Inlet Pressure, psi	Hose Material	Specifications Met		Each
Zinc
1/4	NPT	Male	12 cfm @ 100 psi	140°	75 dBA @ 80 psi	1"	3/8"	25"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	0000000
1/4	NPT	Male	14 cfm @ 100 psi	140°	75 dBA @ 80 psi	1"	3/8"	13 11/16"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
1/4	NPT	Male	21 cfm @ 100 psi	140°	85 dBA @ 80 psi	1"	3/8"	25"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	26 cfm @ 100 psi	140°	80 dBA @ 80 psi	2"	3/8"	7 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	26 cfm @ 100 psi	140°	80 dBA @ 80 psi	2"	3/8"	13 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	26 cfm @ 100 psi	140°	80 dBA @ 80 psi	2"	3/8"	19 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	26 cfm @ 100 psi	140°	80 dBA @ 80 psi	2"	3/8"	25 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	45 cfm @ 100 psi	140°	85 dBA @ 80 psi	2"	1/2"	7 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	45 cfm @ 100 psi	140°	85 dBA @ 80 psi	2"	1/2"	13 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	45 cfm @ 100 psi	140°	85 dBA @ 80 psi	2"	1/2"	19 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	45 cfm @ 100 psi	140°	85 dBA @ 80 psi	2"	1/2"	37 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000

Magnet-Mount Bend-and-Stay Air Nozzles

Zinc Nozzle

The magnetic base with an attached flexible hose mounts to your work surface. Bend the hose to position the nozzle and keep it in place. Use the control valve on the base to adjust airflow.

Zinc nozzle meets OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure and OSHA 29 CFR 1910.95 requirements for noise.

	Air Inlet
Number of Hoses	Pipe Size	Thread Type	Gender	Air Consumption	Max. Temp., °F	Volume	Tip OD	O'all Lg.	Max. Magnetic Pull, lbs.	Max. Inlet Pressure, psi	Material	Specifications Met		Each
Zinc Nozzle
1	1/4	NPT	Female	16 cfm @ 100 psi	140	74 dBA @ 80 psi	3/4"	15 11/16"	100	150	Zinc	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	0000000

Air Nozzles

These nozzles are engineered for the most efficient air consumption.

Nozzles that meet OSHA 29 CFR 1910.242 conform to requirements for maximum air outlet pressure. Nozzles that meet OSHA 29 CFR 1910.95 conform to requirements for noise.

For technical drawings and 3-D models, click on a part number.

1/8 NPT Male Inlet
	Air Consumption	Max. Temp., °F	Volume	Tip OD	O'all Lg.	Max. Inlet Pressure, psi	Specifications Met		Each
Zinc
C	15 cfm @ 100 psi	158°	81 dBA @ 80 psi	5/16"	2 3/16"	145	OSHA Compliant 29 CFR 1910.242	00000000	000000
1/8 NPT Female Inlet
Zinc
E	12 cfm @ 100 psi	250°	71 dBA @ 80 psi	1/2"	1 3/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	00000
1/4 NPT Female Inlet
Zinc
G	18 cfm @ 100 psi	250°	74 dBA @ 80 psi	3/4"	1 3/4"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	00000
3/8 NPT Female Inlet
Zinc
E	44 cfm @ 100 psi	250°	82 dBA @ 80 psi	3/4"	1 5/8"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
1/2 NPT Male Inlet
Zinc
L	73 cfm @ 100 psi	250°	87 dBA @ 80 psi	1"	2 3/4"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
1/2 NPT Female Inlet
Zinc
E	73 cfm @ 100 psi	250°	87 dBA @ 80 psi	1"	2"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
3/4 NPT Male Inlet
Zinc
L	110 cfm @ 100 psi	250°	96 dBA @ 80 psi	1 1/4"	3 1/2"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
3/4 NPT Female Inlet
Zinc
E	110 cfm @ 100 psi	250°	96 dBA @ 80 psi	1 1/4"	2 1/2"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000

Wide-Airflow Air Nozzles

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles. Volume (dBA) is measured 3 ft. from the nozzle at 80 psi.

Nozzles that are OSHA Compliant 29 CFR 1910.242 conform to requirements for maximum air outlet pressure. Nozzles that are OSHA Compliant 29 CFR 1910.95 conform to requirements for noise.

For technical drawings and 3-D models, click on a part number.

				Tip
	Air Consumption	Max. Temp., °F	Volume	Wd.	Thick.	O'all Lg.	Max. Inlet Pressure, psi	Specifications Met		Each
1/8 NPT Male Inlet
Zinc
A	13 cfm @ 100 psi	158°	80 dBA @ 80 psi	15/16"	1/8"	2 3/16"	145	OSHA Compliant 29 CFR 1910.242	00000000	000000
1/8 NPT Female Inlet
Zinc
A	25 cfm @ 100 psi	158°	85 dBA @ 80 psi	1 13/16"	3/16"	3 1/8"	145	OSHA Compliant 29 CFR 1910.242	00000000	00000
1/8 BSPP Male Inlet
Zinc
A	12 cfm @ 85 psi	155°	82 dBA @ 80 psi	15/16"	3/16"	2 3/16"	145	OSHA Compliant 29 CFR 1910.242	0000000	00000
1/4 NPT Male Inlet
Zinc
A	25 cfm @ 100 psi	158°	83 dBA @ 80 psi	1 7/8"	1/8"	3 1/8"	145	OSHA Compliant 29 CFR 1910.242	00000000	00000
1/4 NPT Female Inlet
Zinc
E	26 cfm @ 100 psi	250°	75 dBA @ 80 psi	2"	7/16"	2 1/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
E	37 cfm @ 80 psi	250°	83 dBA @ 80 psi	2"	7/16"	2 1/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	000000
1/4 BSPP Male Inlet
Zinc
A	22 cfm @ 85 psi	155°	85 dBA @ 80 psi	1 13/16"	3/16"	3 1/8"	145	OSHA Compliant 29 CFR 1910.242	0000000	00000
1/4 BSPT Female Inlet
Zinc
E	37 cfm @ 80 psi	250°	83 dBA @ 80 psi	2"	7/16"	2 1/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	000000

Low-Profile Wide-Airflow Air Nozzles

At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.

Nozzles that meet OSHA 29 CFR 1910.242 conform to requirements for maximum air outlet pressure. Nozzles that meet OSHA 29 CFR 1910.95 conform to requirements for noise.

For technical drawings and 3-D models, click on a part number.

				Tip
	Air Consumption	Max. Temp., °F	Volume	Wd.	Thick.	O'all Lg.	Max. Inlet Pressure, psi	Specifications Met		Each
1/8 NPT Female
Zinc
B	11 cfm @ 80 psi	250°	75 dBA @ 80 psi	1"	3/8"	1 5/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	000000
B	18 cfm @ 80 psi	250°	82 dBA @ 80 psi	1"	3/8"	1 5/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	00000
1/8 BSPT Female
Zinc
B	18 cfm @ 80 psi	250°	82 dBA @ 80 psi	1"	3/8"	1 5/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	00000

Right-Angle Wide-Airflow Air Nozzles

Zinc

Air blows out of these nozzles at a right angle in a wide pattern, distributing air over a wider area than focused-airflow nozzles. All conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure.

For technical drawings and 3-D models, click on a part number.

			Tip
Air Consumption	Max. Temp., °F	Volume	Wd.	Thick.	O'all Lg.	Max. Inlet Pressure, psi	Specifications Met		Each
1/8 NPT Male
Zinc
15 cfm @ 100 psi	155°	84 dBA @ 80 psi	15/16"	3/16"	15/16"	145	OSHA Compliant 29 CFR 1910.242	0000000	000000
1/8 BSPP Male
Zinc
13 cfm @ 85 psi	155°	84 dBA @ 80 psi	15/16"	3/16"	15/16"	145	OSHA Compliant 29 CFR 1910.242	0000000	00000

Rotating Air Nozzles

As compressed air flows through these nozzles, they rotate to efficiently and evenly blow off large areas.

For technical drawings and 3-D models, click on a part number.

Air Nozzles

Air Inlet								O'all
Thread Size	Thread Pitch	Gender	No. of Air Outlets	Air Consumption	Max. Temp., °F	Volume	Tip OD	Lg.	Wd.	Max. Inlet Pressure, psi	Material	Specifications Met		Each
M27	2 mm	Male	2	15 cfm @ 100 psi	155°	83 dBA @ 80 psi	5/16"	4 15/16"	6 5/16"	145	Zinc	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	0000000

Adapter Fittings

Pipe Connection			Hose Connection
Size	Thread Type	Gender	Thread Size	Thread Pitch	Gender	O'all Lg.	Material		Each
1/4	BSPP	Female	M27	2 mm	Female	2 3/4"	Aluminum	00000000	0000000