ASTM B36 Washers | McMaster-Carr

Filter by

Material

260 Brass

260-360 Brass

Brass

System of Measurement

Screw Size

Thickness

Washer Type

Finish

Washer Designation

Performance

RoHS

Compliant with Exemptions

Hardness

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

Shape

Made-to-Order

Round

DFARS Specialty Metals

Exempt

Military Specification

MIL-S-5697

Certification

Mil. Spec.

Sold As

Individual

Certificate Type

Material Certificate with Traceable Lot Number and Test Report

Passivation

Magnetic Properties

Shaft Type

Minimum Hardness

225 Products

General Purpose Washers

Your go-to metal washer for every screw size. Washers take the pressure off nuts and screws to protect mounting surfaces.

Brass

Softer than most metals, brass washers won't damage other fastening components.

Brass—With a warm, polished look, these washers are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

Nickel-Plated Brass—The nickel plating offers better corrosion resistance than plain brass to stand up to solvents, salt water, and chemicals. The plating can wear off over time, so these washers are not recommended for applications that experience a lot of friction or wear.

	ID	OD	Thk.	Specs. Met	Pkg. Qty.		Pkg.
Brass



	No. 000	0.040"	0.078"	0.010" to 0.020"	ASTM B36	50	000000000	00000


	No. 00	0.050"	0.109"	0.010" to 0.020"	ASTM B36	50	000000000	0000
	No. 2	0.099"	0.188"	0.013" to 0.027"	ASTM B36	100	000000000	0000
	No. 3	0.101"	0.250"	0.013" to 0.027"	ASTM B36	100	000000000	0000
	No. 4	0.120"	0.281"	0.018" to 0.032"	ASTM B36	100	000000000	0000
	No. 5	0.133"	0.281"	0.018" to 0.032"	ASTM B36	100	000000000	0000
	No. 6	0.147"	0.312"	0.018" to 0.032"	ASTM B36	100	000000000	0000
	No. 8	0.172"	0.375"	0.025" to 0.039"	ASTM B36	100	000000000	0000
	No. 10	0.200"	0.438"	0.029" to 0.043"	ASTM B36	100	000000000	0000
	No. 12	0.228"	0.500"	0.033" to 0.047"	ASTM B36	100	000000000	00000
	1/4"	0.260"	0.562"	0.030" to 0.050"	ASTM B36	100	000000000	00000


	5/16"	0.340"	0.750"	0.052" to 0.072"	ASTM B36	50	000000000	00000
	3/8"	0.392"	0.875"	0.052" to 0.072"	ASTM B36	25	000000000	00000
	7/16"	0.500"	1.125"	0.071" to 0.091"	ASTM B36	10	000000000	00000
	1/2"	0.562"	1.250"	0.081" to 0.101"	ASTM B36	10	000000000	00000
	9/16"	0.625"	1.500"	0.081" to 0.101"	ASTM B36	5	000000000	00000
	5/8"	0.688"	1.500"	0.092" to 0.112"	ASTM B36	5	000000000	00000
	3/4"	0.812"	1.875"	0.097" to 0.130"	ASTM B36	1	000000000	0000
	7/8"	0.938"	2.250"	0.113" to 0.143"	ASTM B36	1	000000000	0000
	1"	1.062"	2.500"	0.120" to 0.159"	ASTM B36	1	000000000	00000
	1 1/8"	1.188"	2.750"	0.120" to 0.171"	ASTM B36	1	000000000	00000


	1 1/4"	1.312"	3.000"	0.120" to 0.187"	ASTM B36	1	000000000	00000
	1 1/2"	1.562"	3.500"	0.120" to 0.187"	ASTM B36	1	000000000	00000


	Nickel-Plated Brass



			No. 4	0.120"	0.281"	0.018" to 0.032"	ASTM B36	100	000000000	0000


			No. 6	0.147"	0.312"	0.018" to 0.032"	ASTM B36	100	000000000	0000
			No. 8	0.172"	0.375"	0.025" to 0.039"	ASTM B36	100	000000000	0000
			No. 10	0.200"	0.438"	0.029" to 0.043"	ASTM B36	100	000000000	00000
			1/4"	0.260"	0.562"	0.030" to 0.050"	ASTM B36	100	000000000	00000
			5/16"	0.340"	0.750"	0.052" to 0.072"	ASTM B36	25	000000000	00000
			3/8"	0.392"	0.875"	0.052" to 0.072"	ASTM B36	25	000000000	00000
			7/16"	0.500"	1.125"	0.071" to 0.091"	ASTM B36	10	000000000	00000

Shims

With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.

You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.

Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

	Thk.	Thk. Tolerance	ID Tolerance	OD Tolerance	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Brass







				1/4" ID × 3/8" OD

				0.005"	-0.0008" to 0.0008"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000


				0.01"	-0.0013" to 0.0013"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000
				0.02"	-0.003" to 0.003"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000
				0.032"	-0.0035" to 0.0035"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000




						3/8" ID × 5/8" OD

						0.002"	-0.0006" to 0.0006"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000


						0.005"	-0.0008" to 0.0008"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.01"	-0.0013" to 0.0013"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000
						0.016"	-0.0025" to 0.0025"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.02"	-0.003" to 0.003"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.025"	-0.003" to 0.003"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.032"	-0.0035" to 0.0035"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.045"	-0.004" to 0.004"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.063"	-0.005" to 0.005"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000
						0.09"	-0.006" to 0.006"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.125"	-0.006" to 0.006"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000




								1/2" ID × 3/4" OD

								0.005"	-0.0008" to 0.0008"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000


								0.01"	-0.0013" to 0.0013"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
								0.016"	-0.0025" to 0.0025"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
								0.02"	-0.003" to 0.003"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000
								0.025"	-0.003" to 0.003"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
								0.032"	-0.0035" to 0.0035"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
								0.045"	-0.004" to 0.004"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
								0.063"	-0.005" to 0.005"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
								0.09"	-0.006" to 0.006"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
								0.125"	-0.006" to 0.006"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000




										5/8" ID × 1" OD

										0.005"	-0.0008" to 0.0008"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000


										0.01"	-0.0013" to 0.0013"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000
										0.016"	-0.0025" to 0.0025"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
										0.02"	-0.003" to 0.003"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000
0.025"										-0.003" to 0.003"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
0.032"	-0.0035" to 0.0035"									0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
0.045"	-0.004" to 0.004"									0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
0.063"	-0.005" to 0.005"									0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
0.09"	-0.006" to 0.006"									0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	5	000000000	0000
0.125"	-0.006" to 0.006"	0" to 0.011"								-0.002" to 0.002"	Rockwell B60	ASTM B36	5	000000000	00000




		3/4" ID × 1 1/8" OD

		0.005"	-0.0008" to 0.0008"							0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000


		0.01"	-0.0013" to 0.0013"							0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000
		0.016"	-0.0025" to 0.0025"							0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
		0.02"	-0.003" to 0.003"							0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	0000
		0.025"	-0.003" to 0.003"	0" to 0.011"						-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
		0.032"	-0.0035" to 0.0035"	0" to 0.011"	-0.002" to 0.002"					Rockwell B60	ASTM B36	10	000000000	00000
		0.045"	-0.004" to 0.004"	0" to 0.011"	-0.002" to 0.002"					Rockwell B60	ASTM B36	10	000000000	00000
		0.063"	-0.005" to 0.005"	0" to 0.011"	-0.002" to 0.002"					Rockwell B60	ASTM B36	10	000000000	00000
		0.09"	-0.006" to 0.006"	0" to 0.011"	-0.002" to 0.002"					Rockwell B60	ASTM B36	5	000000000	00000
		0.125"	-0.006" to 0.006"	0" to 0.011"	-0.002" to 0.002"					Rockwell B60	ASTM B36	5	000000000	00000




				7/8" ID × 1 3/8" OD

				0.005"	-0.0008" to 0.0008"					0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000


				0.01"	-0.0013" to 0.0013"					0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
				0.02"	-0.003" to 0.003"					0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
				0.032"	-0.0035" to 0.0035"					0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
				0.125"	-0.006" to 0.006"					0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	5	000000000	00000




						1" ID × 1 1/2" OD

						0.005"	-0.0008" to 0.0008"			0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000


						0.01"	-0.0013" to 0.0013"			0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.016"	-0.0025" to 0.0025"			0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	5	000000000	0000
						0.02"	-0.003" to 0.003"			0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.025"	-0.003" to 0.003"			0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.032"	-0.0035" to 0.0035"			0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
						0.045"	-0.004" to 0.004"			0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	5	000000000	00000
						0.063"	-0.005" to 0.005"			0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	5	000000000	00000
						0.09"	-0.006" to 0.006"			0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	1	000000000	0000
						0.125"	-0.006" to 0.006"			0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	1	000000000	0000




								1 1/4" ID × 1 3/4" OD

								0.005"	-0.0008" to 0.0008"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000


								0.01"	-0.0013" to 0.0013"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
								0.02"	-0.003" to 0.003"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
								0.032"	-0.0035" to 0.0035"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	10	000000000	00000
								0.125"	-0.006" to 0.006"	0" to 0.011"	-0.002" to 0.002"	Rockwell B60	ASTM B36	1	000000000	0000




6 mm ID × 12 mm OD

0.1 mm	-0.013 mm to 0.013 mm									-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000


0.2 mm	-0.045 mm to 0.045 mm									-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000
0.3 mm	-0.072 mm to 0.072 mm									-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000
0.5 mm	-0.064 mm to 0.064 mm									-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	25	000000000	00000




										8 mm ID × 14 mm OD

										0.1 mm	-0.013 mm to 0.013 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000


										0.2 mm	-0.045 mm to 0.045 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000
										0.3 mm	-0.072 mm to 0.072 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000
		0.5 mm								-0.064 mm to 0.064 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	25	000000000	00000
		1 mm	-0.105 mm to 0.105 mm							-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	25	000000000	00000
		1.5 mm	-0.14 mm to 0.14 mm							-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	0000
		2 mm	-0.21 mm to 0.21 mm							-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	0000




										10 mm ID × 16 mm OD

										0.2 mm	-0.045 mm to 0.045 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000


				0.5 mm						-0.064 mm to 0.064 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	25	000000000	00000
				1 mm	-0.105 mm to 0.105 mm					-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	0000
				1.5 mm	-0.14 mm to 0.14 mm					-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	0000
				2 mm	-0.21 mm to 0.21 mm					-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	0000




										12 mm ID × 18 mm OD

										0.1 mm	-0.013 mm to 0.013 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000


										0.2 mm	-0.045 mm to 0.045 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000
										0.3 mm	-0.072 mm to 0.072 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000
										0.5 mm	-0.064 mm to 0.064 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	25	000000000	00000
										1 mm	-0.105 mm to 0.105 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	0000
										1.5 mm	-0.14 mm to 0.14 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	0000
						2 mm				-0.21 mm to 0.21 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	0000




										16 mm ID × 22 mm OD

										0.1 mm	-0.013 mm to 0.013 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000


										0.2 mm	-0.045 mm to 0.045 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000
										0.5 mm	-0.064 mm to 0.064 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	25	000000000	00000
										1 mm	-0.105 mm to 0.105 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	0000
								2 mm		-0.21 mm to 0.21 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	00000




										20 mm ID × 28 mm OD

										0.5 mm	-0.064 mm to 0.064 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	0000


										1.5 mm	-0.14 mm to 0.14 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000




										25 mm ID × 36 mm OD

										1 mm	-0.105 mm to 0.105 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000




												30 mm ID × 42 mm OD

												0.5 mm	-0.064 mm to 0.064 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	10	000000000	00000


		1 mm	-0.105 mm to 0.105 mm									-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000
		1.5 mm	-0.14 mm to 0.14 mm									-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	1	000000000	0000
		2 mm	-0.21 mm to 0.21 mm									-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	1	000000000	0000




												40 mm ID × 50 mm OD

												0.2 mm	-0.045 mm to 0.045 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	1	000000000	0000


				0.5 mm								-0.064 mm to 0.064 mm	-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	5	000000000	0000
				2 mm	-0.21 mm to 0.21 mm							-0.3 mm to 0.3 mm	-0.5 mm to 0.5 mm	Rockwell B14	ASTM B36	1	000000000	0000

Peel-Away Multilayer Shims

Image of Product. Front orientation. Shims. Peel Away, Round, Multilayer, Sold Individually.

Fine-tune thickness without worrying about stacking multiple shims. These shims are made of metal layers bonded with adhesive—peel off the layers with a utility knife until you reach your desired thickness. To make peeling easier, warm the shims to soften the adhesive. With thickness tolerances as fine as a strand of hair, all of these shims precisely align, space, and level components on shafts, arbors, and machinery.

Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

	Thk.	Thk. Tolerance	ID Tolerance	OD Tolerance	No. of Layers	Layer Thk.	Min. Hardness	Specs. Met	Mil. Spec.		Each
Brass







				3/8" ID × 5/8" OD

				0.032"	-0.005" to 0.005"	-0.01" to 0.01"	-0.01" to 0.01"	16	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	000000


				0.062"	-0.002" to 0.006"	-0.01" to 0.01"	-0.01" to 0.01"	31	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000




						1/2" ID × 3/4" OD

						0.032"	-0.005" to 0.005"	-0.01" to 0.01"	-0.01" to 0.01"	16	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000


						0.062"	-0.002" to 0.006"	-0.01" to 0.01"	-0.01" to 0.01"	31	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000




								5/8" ID × 1" OD

								0.032"	-0.005" to 0.005"	-0.01" to 0.01"	-0.01" to 0.01"	16	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000


								0.062"	-0.002" to 0.006"	-0.01" to 0.01"	-0.01" to 0.01"	31	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000
								0.125"	-0.003" to 0.012"	-0.01" to 0.01"	-0.01" to 0.01"	62	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000




										3/4" ID × 1 1/8" OD

										0.032"	-0.005" to 0.005"	-0.01" to 0.01"	-0.01" to 0.01"	16	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000


										0.062"	-0.002" to 0.006"	-0.01" to 0.01"	-0.01" to 0.01"	31	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000
										0.125"	-0.003" to 0.012"	-0.01" to 0.01"	-0.01" to 0.01"	62	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000




												7/8" ID × 1 3/8" OD

												0.032"	-0.005" to 0.005"	-0.01" to 0.01"	-0.01" to 0.01"	16	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000


												0.062"	-0.002" to 0.006"	-0.01" to 0.01"	-0.01" to 0.01"	31	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000
												0.125"	-0.003" to 0.012"	-0.01" to 0.01"	-0.01" to 0.01"	62	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000




														1" ID × 1 1/2" OD

														0.032"	-0.005" to 0.005"	-0.01" to 0.01"	-0.01" to 0.01"	16	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000


0.062"	-0.002" to 0.006"													-0.01" to 0.01"	-0.01" to 0.01"	31	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000
0.125"	-0.003" to 0.012"													-0.01" to 0.01"	-0.01" to 0.01"	62	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000




		1 1/4" ID × 1 3/4" OD

		0.032"	-0.005" to 0.005"											-0.01" to 0.01"	-0.01" to 0.01"	16	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000


		0.062"	-0.002" to 0.006"											-0.01" to 0.01"	-0.01" to 0.01"	31	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000
		0.125"	-0.003" to 0.012"											-0.01" to 0.01"	-0.01" to 0.01"	62	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000




				1 1/2" ID × 2 1/8" OD

				0.032"	-0.005" to 0.005"									-0.01" to 0.01"	-0.01" to 0.01"	16	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000


				0.062"	-0.002" to 0.006"									-0.01" to 0.01"	-0.01" to 0.01"	31	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000
				0.125"	-0.003" to 0.012"									-0.01" to 0.01"	-0.01" to 0.01"	62	0.002"	Not Rated	ASTM B36, SAE AMS-DTL-22499	MIL-S-5697	000000000	00000

Made-to-Order Shims

Image of Product. Front orientation. Shims. Sold Individually, Made-to-Order.

If you need a unique shim shape or size, we’ll precision cut it for you. With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.

Send your dimensioned DWG, DXF, IGES, or STEP file to sales@mcmaster.com. Please leave at least _1/8" wall between shim edge and holes. Minimum hole size is _1/8". Shims should be no smaller than 1" × 1" square or 1" OD. Maximum shim dimension is the largest overall length, width, or diameter of your custom shim.

Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

Material Certificate—Shims include a report with a traceable lot number.

						2" × 2" Maximum Shim Size			5" × 5" Maximum Shim Size			7" × 7" Maximum Shim Size			11" × 11" Maximum Shim Size			23" × 23" Maximum Shim Size
	Thk.	Thk. Tolerance	Min. Hardness	Certificate Type	Specs. Met	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Brass



		0.001"	-0.00005" to 0.00005"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	000000	4	000000000	000000	—	———	0	—	———	0	—	———	0


		0.002"	-0.0001" to 0.0001"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	0000000	4	000000000	0000000	1	000000000	0000000
		0.003"	-0.00015" to 0.00015"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.004"	-0.0002" to 0.0002"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	—	———	0	—	———	0	—	———	0
		0.005"	-0.00025" to 0.00025"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.01"	-0.0005" to 0.0005"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.02"	-0.001" to 0.001"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.025"	-0.00125" to 0.00125"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.031"	-0.00155" to 0.00155"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000

Peel-Away Multilayer Made-to-Order Shims

Image of Product. Front orientation. Shims. Multilayer, Sold Individually, Made-to-Order, Peel Away.

If you need a unique peel-away shim shape or size, we’ll precision cut it for you. Use these shims to fine-tune thickness without worrying about stacking multiple shims. They're made of metal layers bonded with adhesive—peel off the layers with a utility knife until you reach your desired thickness. To make peeling easier, warm the shims to soften the adhesive. With thickness tolerances as fine as a strand of hair, all of these shims precisely align, space, and level components on shafts, arbors, and machinery.

Send your dimensioned DWG, DXF, IGES, or STEP file to sales@mcmaster.com. Please leave at least _1/8" wall between shim edge and holes. Minimum hole size is _1/4". Shims should be no smaller than 1" × 1" square or 1" OD. Maximum shim dimension is the largest overall length, width, or diameter of your custom shim.

Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

Material Certificate—Shims include a report with a traceable lot number.

								2" × 2" Maximum Shim Size			5" × 5" Maximum Shim Size			7" × 7" Maximum Shim Size			11" × 11" Maximum Shim Size			23" × 23" Maximum Shim Size
	Thk.	Thk. Tolerance	No. of Layers	Layer Thk.	Min. Hardness	Certificate Type	Specs. Met	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Brass



		0.008"	-0.0004" to 0.0004"	4	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	0000000	4	000000000	0000000	9	000000000	0000000	4	000000000	0000000	1	000000000	0000000


		0.016"	-0.0008" to 0.0008"	8	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	000000	4	000000000	000000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.032"	-0.0016" to 0.0016"	16	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	000000	4	000000000	000000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.048"	-0.0024" to 0.0024"	24	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	000000	4	000000000	000000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.062"	-0.0031" to 0.0031"	32	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	000000	4	000000000	000000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.124"	-0.0062" to 0.0062"	62	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	000000	4	000000000	000000	9	000000000	00000000	4	000000000	00000000	1	000000000	00000000