McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    20 Products

    Oversized Washers

    Image of Product. Front orientation. Washers. Oversized Washers.
    These washers have exaggerated diameters to cover large holes and to compensate for uneven mounting surfaces. They are also thicker than general purpose washers, so they bridge wide gaps when used as spacers.
    Stainless SteelAbout Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these washers resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    For Screw
    Size
    ID,
    mm
    OD,
    mm
    Thk., mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    M12
    		12.025.02.7 to 3.0DIN 1440193849A20600000
     
    Steel
    Steel—Best for dry environments since moisture will cause these washers to rust.
    For Screw
    Size
    ID,
    mm
    OD,
    mm
    Thk., mm
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Steel
    M3
    		3.06.00.7 to 0.9DIN 1440, ISO 873810096505A11100000
    M4
    		4.08.00.7 to 0.9DIN 1440, ISO 873810096505A1120000
    M5
    		5.010.00.7 to 0.9DIN 1440, ISO 873810096505A1130000
    M6
    		6.012.01.3 to 1.7DIN 1440, ISO 873810096505A1140000
    M7
    		7.014.01.3 to 1.7DIN 1440, ISO 873810096505A1150000
    M8
    		8.016.01.8 to 2.2DIN 1440, ISO 873810096505A11600000
    M10
    		10.020.02.2 to 2.8DIN 1440, ISO 87385096505A11700000
    M12
    		12.025.02.7 to 3.3DIN 1440, ISO 87382596505A11800000
    M14
    		14.028.02.7 to 3.3DIN 1440, ISO 87382596505A11900000
    M16
    		16.028.02.7 to 3.3DIN 1440, ISO 87382596505A12100000
    M18
    		18.030.03.7 to 4.3DIN 1440, ISO 87381096505A1220000
    M20
    		20.032.03.7 to 4.3DIN 1440, ISO 87381096505A1230000
    M22
    		22.034.03.7 to 4.3DIN 1440, ISO 87381096505A12400000
    M24
    		24.038.03.7 to 4.3DIN 1440, ISO 87381096505A12500000
    M25
    		25.040.03.7 to 4.3DIN 1440, ISO 8738596505A1260000
    M26
    		26.040.04.4 to 5.6DIN 1440, ISO 8738596505A1270000
    M28
    		28.042.04.4 to 5.6DIN 1440, ISO 8738596505A12800000
    M30
    		30.045.04.4 to 5.6DIN 1440, ISO 8738196505A1290000
    M32
    		32.050.04.4 to 5.6DIN 1440, ISO 8738196505A1310000
     
    back to top