McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    20 Products

    Cross-Bracing Washers

    Image of Product. Front orientation. Cross-Bracing Washers.
    Connect cross-bracing rods or cables to structural beams. These washers have a curved top surface that lets rods pass through and be secured with a nut at different angles. The flat bottom surface sits flush against structural beams. Washers have a locking tab that keeps them in place when force is applied. They’re also known as hillside washers.
    For Shaft
    Dia.
    Lg.
    Wd.
    Max. Load,
    lb.
    Hardness
    Color
    Features
    Each
    Cast Iron
    3/8"1 3/4"1.188"7,400Not RatedGrayLocking Tab4335N11100000
    1/2"2"1.313"13,500Not RatedGrayLocking Tab4335N1120000
    5/8"2 1/4"1.438"21,500Not RatedGrayLocking Tab4335N1130000
    3/4"2 3/8"1.625"32,000Not RatedGrayLocking Tab4335N1140000
    7/8"2 7/8"1.813"44,000Not RatedGrayLocking Tab4335N1150000
    1"3 1/8"2.000"58,000Not RatedGrayLocking Tab4335N1160000
    1 1/8", 1 1/4"4 13/16"2.438"92,000Not RatedGrayLocking Tab4335N11700000
     
    Galvanized Cast Iron
    1/2"2"1.313"13,500Not RatedGrayLocking Tab4335N1510000
    5/8"2 1/4"1.438"21,500Not RatedGrayLocking Tab4335N1520000
    3/4"2 3/8"1.625"32,000Not RatedGrayLocking Tab4335N1530000
    7/8"2 7/8"1.813"44,000Not RatedGrayLocking Tab4335N1540000
    1"3 1/8"2.000"58,000Not RatedGrayLocking Tab4335N15500000
    1 1/8", 1 1/4"4 13/16"2.438"92,000Not RatedGrayLocking Tab4335N15600000
     

    Flanged Cross-Bracing Washers

    Image of Product. Front orientation. Cross-Bracing Washers. Flanged Cross-Bracing Washers.
    These washers have a flange to spread force across structural beams better than standard washers for cross-bracing rods and cables. Their top surface is curved to let rods pass through and be secured with a nut at different angles. The bottom surface is flat to sit flush with structural beams. These washers have a locking tab that keeps them in place when force is applied. They’re also known as hillside washers.
    Galvanized Cast Iron—Galvanized cast iron washers resist corrosion better than primed washers.
    For Shaft
    Dia.
    Lg.
    Wd.
    Max. Load,
    lb.
    Hardness
    Color
    Features
    Each
    Primed Cast Iron
    1/2", 5/8"4"3.000"16,600Not RatedGrayLocking Tab4335N11900000
    1/2", 5/8"4"3.000"16,600Not RatedRedLocking Tab4335N1210000
    3/4", 7/8"4"3.000"30,000Not RatedGrayLocking Tab4335N1230000
     
    Galvanized Cast Iron
    1/2", 5/8"4"3.000"16,600Not RatedLocking Tab4335N1180000
    3/4", 7/8"4"3.000"30,000Not RatedLocking Tab4335N1220000
    1", 1 1/8"4"3.000"50,500Not RatedLocking Tab4335N12500000
    1 1/4"4"3.063"92,000Not RatedLocking Tab4335N12800000
     
    back to top