We will reply to your message within an hour.
Flatten these carboys for convenient storage.
These carboys are fluorinated to prevent contents from being absorbed.
Store, pour, and carry up to 1 gallon.
These bottles are fluorinated to resist absorption of contents.
Thread a wire tamper-seal tag through the holes in the lid and bottle. If the tag is cut or broken, you'll know the bottle has been opened.
Cover the vent hole with your finger to control the pouring speed.
These PTFE bottles won’t break down when storing most harsh chemicals.
These bottles are sterilized and then sealed in a package marked with a lot number.
Often used in chromatography, these bottles have a UV-resistant coating that protects light-sensitive chemicals and makes the bottles slip, impact, and shatter resistant. They withstand vacuum applications.
A coating on these bottles make them slip, impact, and shatter resistant.
These bottles withstand vacuum and pressure applications.
Transfer liquid through tubing.
Store a large quantity of liquid in these bottles and use the built-in faucet to dispense.
Fill these air-and liquid-tight bottles directly from your line to store, test, and ship liquids. Connect to a quick-clamp fitting with the included gasket and clamp.
Squeeze the bottle to force liquid through the tube and into the cup, then pour out the measured amount.
Lid has two openings, one for shaking and one for pouring.
These jars are fluorinated to resist absorption of contents.
Color-code your storage containers to quickly identify small parts.
Each jar comes individually bagged and sterilized.
Even when turned upside down, these containers keep fluids inside. They include an applicator brush and a plug to seal the container.
A sealing ring separates when the lid is opened.
Also known as oil analysis bottles, these are cleaned to have fewer than 10 particles larger than 10 microns per milliliter.
Squeeze the top of these jars with a single hand to dispense cable ties, screws, nuts, and other small parts.
Silicone rubber seals keep air and moisture out of these glass jars.
A coating on these jars make them slip, impact, and shatter resistant.
Also known as mason jars, these have a tin-plated lid that forms a vacuum seal when heated.
The open top makes these easier to fill than jugs, while the spout gives more control when pouring.
Store samples and other small quantities in these vials.
These vials are sterilized and then sealed in a package marked with a lot number.
These vials are sized to store samples and other small quantities.
Vials have a textured wand attached to the lid.
These tanks have capacities from 2.5 to 1,000 gallons.
Store between 30 and 550 gallons in these large tanks.
Even though these tanks are less than 20" tall, they still hold 50 to 200 gallons.
Despite their large size you can move these tanks with a forklift. They store between 75 and 500 gallons.
No need for separate spill-control pallets or trays—comply with EPA regulations for storing hazardous liquids with just one tank.
These 12-gallon capacity tanks have a level gauge, and a fuel withdrawal outlet separate from the fill opening.
Tanks provide extra protection for products that require double-wall containment, such as diesel and waste oil, solvents, and antifreeze.
A lifting lug on top makes these tanks easy to transport.
These tanks are typically used for storing fuel and waste oil.
These tanks are often used as gravity-fed dispensers.
The heavy-wall construction makes these tanks durable and easy to clean.
The bottom of these tanks is sloped to ensure easy and complete drainage.
Store and transport liquids in bulk in sanitary environments such as food and pharmaceutical plants.
Attach a compressed air source to pressurize liquids for dispensing and spraying.
Store and dispense liquids in food, pharmaceutical, and beverage plants—these tanks attach to a compressed air source for use in sanitary environments.
Dispense liquids using the built-in faucet.
These plastic batch cans meet NSF/ANSI 2 sanitary standards for food environments.
Use the faucet on these batch cans for easy dispensing.
These corrosion-resistant cans have a built-in faucet for dispensing.
These metal batch cans meet NSF/ANSI 2 standards for food-processing equipment.
Also known as milk cans, these have a narrow mouth for controlled pouring.
These tubs are crack and dent resistant.
Tubs are made of galvanized steel for corrosion resistance.
Ship materials in these UN-compliant drums.
These drums are seamless, making them more durable than other plastic drums.
A threaded opening 4" from the bottom allows you to drain a drum without moving it.
The inside of these drums is epoxy coated to resist rust.
These drums have smooth, welded seams to prevent food and chemicals from collecting in crevices.
These drums are corrosion resistant and are UN-compliant for shipping.
These drums are UN-compliant for shipping.
Store food, beverage, and pharmaceutical products in these drums, which have a sanitary design.
Use these drums for secondary containment or for temporarily storing and transporting leaking containers.
This pail has a brass handle that inhibits sparking and is nonmagnetic. It is often used with oil and solvents.
Pails are often used in food-processing applications.
Often used in food-processing applications, these plastic pails can be located using metal detectors.
Mix and store noncorrosive flammable liquids, such as paints and lacquers.
These 300 series stainless steel pails meet NSF/ANSI standards and are commonly used in food-processing applications.
Hold objects or materials for transport or pouring.
Keep contents secure with these pails and tight-fitting lids.
These single-use pails are often used to mix paint.
These beakers stand up to the most aggressive chemicals as well as temperatures up to 500° F.
Scoop, measure, and pour without fear of contaminating your food line. A metal additive in the plastic can be picked up by a metal detector, and a chemical additive will show up on X-ray, so you can find them if they fall into your line.
These beakers are more durable than other glass beakers.
Protect plastic and glass beakers when working with harsh chemicals.
Precisely measure and pour liquids.
Place small samples in these tubes for testing, mixing, or inspection.
The tapered end is designed to fit in a centrifuge.
These volumetric flasks have a wide base and long neck for fast mixing.
The spherical body and uniform wall thickness allow even heat distribution.
Also known as volumetric flasks, these have a wide base and long neck for fast mixing.
With spill capacities up to 170 gallons, these tubs hold 55-gallon drums.
Choose from a variety of containers, lids, and accessories to design a dispenser that will pour or pump contents without allowing contaminants inside. These dispensers are often used with oil and other lubricating fluids.
Also known as wash bottles, these dispense liquid at a downward angle.
Labels allow identification at a glance.
These bottles are made with an additive that prevents electrostatic discharge from building up on the surface.
These bottles are fluorinated to prevent contents from being absorbed.
Made of FEP plastic, these are our most chemical-resistant squeeze bottles. They are also autoclavable.
Long nozzles allow dispensing in hard-to-reach places.
Sets include eight squeeze bottles with nozzle covers and a steel holder.
Add a needle with a luer lock connection and squeeze to dispense a single drop or a stream of liquid.
Squeeze out liquids one drop at a time.
Identify contents at a glance with these sets of 25 bottles in five lid colors.
Choose a needle-tip squeeze bottle for your most precise dispensing applications.
Fill air-atomizing sprayers with these pitchers. The nozzle is designed to fit into the sprayer opening and has a removable brass filter to strain out foreign particles.
These sprayers are small enough to use with one hand.
Spray thin liquids evenly without propellant. Fill the sprayer and pressurize with compressed air.
Fill the reservoir, attach the propellant cartridge, and spray.
Spray liquids with these fillable bottles—the head twists on and off to make filling easy.
Unlike standard spray bottles, these dispense oil and other high-viscosity liquids without clogging.
Spray liquids around your food processing plant while reducing the risk of contaminating the food. These spray bottles have metal additives in the spray head and on the label that can be picked up by a metal detector if the bottles—or any piece of the spray head or label—fall into your line.
Release a fine mist spray similar to an aerosol without propellants or pressure.
No funnel needed to fill these bottles—a wide mouth allows quick refilling without spilling.
These spray bottles resist harsh chemicals and solvents.
Dispense up to three times more liquid per stroke than other spray bottles.
Access tight spaces with the 36" long tube that extends from these spray bottles.
Identify contents quickly with labels written in English and Spanish.
Spray at any angle—even upside down.
Sterilized so they won’t contaminate your samples or lines, these liquid samplers are often used in food processing, pharmaceutical, and biotech applications.
Often used in laboratories, these dispensers fit on most lab bottles. Push down on the top to dispense precise amounts of acids, solvents, and other liquids.
Dispense flammable liquids with these FM-approved push-top dispensers.
Turn these bottles upside down and press the flange to dispense.
Squeeze the ball to create pressure, then push down on the dispenser to dispense flammable liquids into vials, test tubes, and other small containers. Only a PTFE tube and stainless steel pump come into contact with the liquid.
Moisten swabs and wipes by pushing down on the top.
An additive prevents electrostatic discharge from building up on the surface of these dispensers.
A unique valve on these pens and bottles releases a precise amount of liquid without flooding the tip and splattering.
In the plant or in the field, these coolers keep refreshments cold for hours.
Often used in break rooms and cafeterias, these dispensers make it easy to serve beverages to a few people or a crowd.
Water bottles have a flip-up lid for convenient use.
Stay hydrated while working outdoors and in other high-heat environments.
Carry coffee, tea, and other hot or cold drinks with you around the workplace.
Use these disposable cups for beverages.
At 4 fl. oz. and smaller, these cups are used for samples, condiments, and small-batch mixing.
Fill these containers with condiments such as salt, pepper, sugar, ketchup, mustard, and salad dressing for easy dispensing.
Fill these lightweight bottles and use with any brand of water dispenser.
Provide drinking water wherever it's needed—no plumbing hookup required.
These tanks can be used as water heaters when used with a heat source, such as an immersion heater.
This drum works with drum-top vacuums for 55-gallon open-head drums.
For large jobs, pour paint into these four-gallon pails. They have a handle for portability and a textured edge to remove excess paint from your roller. Compatible with rollers up to 9" long.