Filter by
For Use With
Power Source
Pump Type
Maximum Feet of Head
DFARS Specialty Metals
Priming Type
Extended-Life Plastic Circulation Pumps for Chemicals
 |
These pumps have the best chemical resistance of all our circulation pumps. Instead of a shaft seal, they use magnets to turn the impeller, reducing wear and leakage. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. Do not run dry or use with solids.
Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.
Pumps | Impellers | Repair Kits | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flow Rate, gpm | Overall | ||||||||||||||||||||||
Max. Flow Rate, gpm | @ 10 ft. of Head | @ 20 ft. of Head | @ 30 ft. of Head | @ 40 ft. of Head | @ 50 ft. of Head | @ 60 ft. of Head | Max. ft. of Head, ft. | Max. Viscosity, cP | Power, hp | Current | Intake Pipe Size (Gender) | Discharge Pipe Size (Gender) | Lg. | Wd. | Ht. | Each | Each | Each | |||||
120V AC/240V AC, Single Phase—Without Thermal Overload Protection | |||||||||||||||||||||||
Hardwire | |||||||||||||||||||||||
| 23 | — | 20 | 10 | — | — | — | 35 | — | 1/4 | 2.07 amp/4.14 amp | 1 (Female) | 1 (Female) | 14 3/8" | 5 1/8" | 7 7/8" | 3068N11 | 000000000 | 3068N112 | 0000000 | 3068N111 | 000000 | ||
| 26 | — | 26 | 12 | — | — | — | 35 | — | 1/3 | 3.24 amp/6.84 amp | 1 (Female) | 1 (Female) | 16 5/16" | 6 1/8" | 8 3/16" | 3068N12 | 00000000 | 3068N122 | 000000 | 3068N121 | 00000 | ||
240V AC/460V AC, Three Phase—Without Thermal Overload Protection | |||||||||||||||||||||||
Hardwire | |||||||||||||||||||||||
| 57 | 57 | 53 | 30 | 25 | — | — | 45 | — | 1/2 | 1.1 amp/2.2 amp | 1 1/2 (Female) | 1 1/2 (Female) | 18 3/8" | 8 7/8" | 11 5/16" | 3068N13 | 00000000 | 3068N132 | 000000 | 3068N131 | 00000 | ||
| 90 | 90 | 84 | 74 | 61 | 49 | — | 70 | — | 1 | 1.5 amp/3 amp | 1 1/2 (Female) | 1 1/2 (Female) | 18 7/8" | 6 5/16" | 10 1/8" | 3068N14 | 00000000 | 3068N142 | 000000 | 3068N141 | 00000 | ||
120V AC/208V AC to 240V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||||||
Hardwire | |||||||||||||||||||||||
| 38 | 36 | 32 | 27 | 21 | — | — | 49 | 5 | 1/2 | 7.5 amp/3.7 amp | 1 (Female) | 3/4 (Male) | 15 1/2" | 9" | 8 1/4" | 3068N19 | 00000000 | 3068N222 | 000000 | 3068N221 | 0000 | ||
| 53 | 53 | 46 | 40 | 33 | 23 | 2 | 60 | 5 | 1 | 9.2 amp/4.6 amp to 6.3 amp | 1 1/2 (Female) | 1 (Male) | 17 13/16" | 9 1/8" | 8 3/16" | 3068N18 | 00000000 | 3068N232 | 000000 | 3068N231 | 00000 | ||
208V AC to 240V AC/460V AC, Three Phase—Without Thermal Overload Protection | |||||||||||||||||||||||
Hardwire | |||||||||||||||||||||||
| 30 | 31 | 26 | 20 | 7 | — | — | 41 | 5 | 1/3 | 1.2 amp to 1.3 amp/0.6 amp | 1 (Female) | 3/4 (Male) | 15 1/16" | 9 1/4" | 7 3/8" | 3068N21 | 00000000 | 3068N212 | 000000 | 3068N221 | 0000 | ||
| 38 | 36 | 32 | 27 | 21 | — | — | 49 | 5 | 1/2 | 0.8 amp to 1.7 amp/1.7 amp | 1 (Female) | 3/4 (Male) | 15 1/16" | 9 1/8" | 7 3/16" | 3068N22 | 00000000 | 3068N222 | 000000 | 3068N221 | 0000 | ||
| 53 | 53 | 46 | 40 | 33 | 23 | 2 | 60 | 5 | 1 | 2.2 amp to 3.3 amp/1.1 amp | 1 1/2 (Female) | 1 (Male) | 16 9/16" | 9 1/8" | 7 3/8" | 3068N23 | 00000000 | 3068N232 | 000000 | 3068N231 | 00000 | ||
| 82 | 82 | 82 | 81 | 80 | 71 | 61 | 85 | 5 | 2 | 4.8 amp to 4.9 amp/2.4 amp | 2 (Male) | 1 1/2 (Male) | 20 11/16" | 10 3/8" | 10" | 3068N24 | 00000000 | 3068N242 | 00000000 | 3068N241 | 00000 | ||
| 120 | 120 | 120 | 120 | 112 | 105 | 92 | 95 | 5 | 3 | 7.8 amp to 8 amp/3.9 amp | 2 (Male) | 1 1/2 (Male) | 24 3/8" | 11 1/2" | 10 1/2" | 3068N26 | 00000000 | 3068N252 | 00000000 | 3068N251 | 00000 | ||
Harsh Environment Self-Priming Dewatering Pumps
 |
This pump has a totally enclosed nonventilated (TENV) motor that is cooled by the liquid being pumped. Also known as a flexible impeller pump, it creates a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump. Mount up to 6 feet above your liquid source. Pump can pass solids up to 1/4" in diameter without clogging, so there’s no need to filter sediment and debris. A handle makes it convenient for on-the-go removal of bilge water, waste oil, and spills. Pump can also be used to cool marine engines and drain liquid from holding tanks.
Note: Pump must be filled with liquid before use. It needs a constant flow of liquid and cannot run dry.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Flow Rate, gpm | Max. ft. of Head, ft. | Max. Solids Dia. | Removes Water Down To | Max. Viscosity, cP | Temp. Range, ° F | Power, hp | Current, amp | Intake Size | Discharge Size | Ht. | Wd. | Lg. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | ||||||||||||||||
Plug with 8 ft. Long Cord | ||||||||||||||||
| 5 4/5 | 30 | 1/4" | Not Rated | 125 | 60 to 180 | 1/4 | 4.2 | 1/2 NPT Female, 3/4 GHT Male | 1/2 NPT Female, 3/4 GHT Male | 9" | 5 5/8" | 7 3/8" | 4381K67 | 0000000 | ||
Drill-Operated Dewatering Pumps
 |  |  |
Pump | Pump with Intake and Discharge Tubes |
Intake | Discharge | Shaft | Overall | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Flow Rate, gpm | Max. ft. of Head, ft. | Max. Viscosity, cP | Temp. Range, ° F | Hose Size | Thread Type | Connection | Gender | Hose Size | Thread Type | Connection | Gender | Motor Speed, rpm | Dia. | Lg. | Ht. | Wd. | Lg. | Includes | Each | |||
| 3 3/4 | 90 | 1 | 40 to 110 | 3/4 | GHT | Threaded | Male | 3/4 | GHT | Threaded | Male | 1,200 | 1/4" | 3/4" | 3" | 4 1/2" | 3" | — | 99705K21 | 000000 | ||
| 3 3/4 | 90 | 1 | 40 to 110 | 3/4 | GHT | Threaded | Male | 3/4 | GHT | Threaded | Male | 1,200 | 1/4" | 3/4" | 3" | 4 1/2" | 3" | 30" Slip-On Intake Tube, 34" Discharge Tube with 3/4" Male GHT Connection | 99705K25 | 00000 | ||
Self-Priming Circulation Pumps without Motor for Water
 |
Also known as flexible impeller pumps, these create a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump. The impeller resists clogging and wear. Select a spark-free air motor for hazardous environments or attach an electric motor with a speed reducer or a belt pulley to alter the pump speed.
Repair kits (sold separately) include components such as impellers, O-rings, and seal lips.
Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.
Overall | Shaft | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Flow Rate, gpm | Max. ft. of Head, ft. | Max. Pressure, psi | Max. Viscosity | Temp. Range, ° F | Req. Power, hp | Intake Connection Type | Discharge Connection Type | Ht. | Lg. | Wd. | Dia. | Lg. | Ctr.-to-Base Lg. | Each | |||
For 500 rpm to 2,100 rpm Motor Speed | |||||||||||||||||
| 13 | 60 | 26 | Not Rated | 50 to 180 | 1/3 | 1/2 Female NPT | 1/2 Female NPT | 3 13/16" | 4 1/2" | 4 1/8" | 5/8" | 1 1/8" | 1 15/16" | 4281K21 | 0000000 | ||
| 27.9 | 60 | 26 | Not Rated | 50 to 180 | 3/4 | 1 Female NPT | 1 Female NPT | 3 9/16" | 6 3/8" | 4 3/4" | 5/8" | 2 1/4" | 1 7/8" | 4281K23 | 000000 | ||
Self-Priming Circulation Pumps without Motor for Oil
|
Use these pumps to move lubricating oil such as hydraulic and motor oil. Also known as flexible impeller pumps, they create a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump. The impeller resists clogging and wear. Select a spark-free air motor for hazardous environments or attach an electric motor with a speed reducer or a belt pulley to alter the pump speed.
Repair kits (sold separately) include components such as impellers, O-rings, and seal lips.
Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.
Shaft | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Flow Rate, gpm | Max. ft. of Head, ft. | Max. Pressure, psi | Max. Viscosity | Temp. Range, ° F | Req. Power, hp | Intake Connection Type | Discharge Connection Type | Dia. | Lg. | Ctr.-to-Base Lg. | Ht. | Lg. | Wd. | Each | |||
For 500 rpm to 2,100 rpm Motor Speed | |||||||||||||||||
| 11.5 | 50 | 21 | Not Rated | 50 to 180 | 1/3 | 1/2 Female NPT | 1/2 Female NPT | 5/8" | 1 1/8" | 1 15/16" | 3 13/16" | 4 1/2" | 4 1/8" | 4281K24 | 0000000 | ||
| 25 | 50 | 26 | Not Rated | 50 to 180 | 3/4 | 1 Female NPT | 1 Female NPT | 5/8" | 2 1/4" | 1 7/8" | 3 9/16" | 6 3/8" | 4 3/4" | 4281K26 | 000000 | ||
