Place these heat exchangers in open tanks to heat or cool their contents by transferring heat from water or steam that flows through passageways in the panel. Pipe connections are located above the fluid level, so the heat exchangers can be removed without emptying the tank.

316 stainless steel heat exchangers are more corrosion resistant than steel heat exchangers.

For technical drawings and 3-D models, click on a part number.

Often used to monitor boiler water quality without shutting down the system, these heat exchangers cool hot liquid samples to safe temperatures for testing. Sample liquid flows through the tubes, and cold water from an external water supply flows around the tubes to cool the liquid in the tubes.

304 stainless steel tubes are more corrosion resistant than copper tubes.

316 stainless steel tubes have the best corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Quickly heat or cool beverages and condiments using these heat exchangers, which have a sanitary design certified by 3-A. Also known as plate and frame heat exchangers, they run your product through stacked, corrugated plates and send a liquid of a different temperature in the opposite direction. They’re more efficient than shell and tube heat exchangers because they have a larger surface area for heat transfer. Made of stainless steel, the plates and frame won't rust or corrode from contact with liquids. Oil, water, and salt won’t break down their Buna-N gaskets. The interior gaskets clip onto the plates instead of being glued, so they’re easy to remove for cleaning. Connect these heat exchangers to sanitary quick-clamp fittings using a gasket and a clamp.

Btu/hr. cooling capacity and maximum flow capacity are based on cooling 212˚ F beer wort to 68˚ F using 55˚ F water.

Heat exchangers with mounting feet stand free, or you can mount their frame to the floor using bolt holes in the feet.

Add plates and gaskets to increase heating and cooling capacity or replace existing plates. When replacing your plate, choose one with the same maximum flow capacity. Flow plates have two blocked ports to create extra passes, which makes heat transfer more efficient. Pass plates have four open ports for liquid to flow through.

For technical drawings and 3-D models, click on a part number.

With more than three times the pressure rating of standard heat exchangers, these are often used for high-pressure condensing, evaporating, heating, and cooling. Also known as shell and tube heat exchangers, they transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes. Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference. Shell and tubes are 316 stainless steel for excellent corrosion resistance.

For technical drawings and 3-D models, click on a part number.

A fan cools water as it moves through the tubes to dissipate heat. These heat sinks have flanges with mounting slots for installation in frames and cabinets. Overall height, width, and depth do not include tube ends.

Heat sinks with 316 stainless steel tubes have excellent corrosion resistance to withstand deionized water and other corrosive liquid.

For technical drawings and 3-D models, click on a part number.

To provide a more consistent flow of cooled water than other heat sinks for water, these have a built-in pump and reservoir. The internal fan-cooled heat exchanger dissipates heat. Btu/hr. cooling capacity is based on water with an initial temperature difference of 77° F.

For technical drawings and 3-D models, click on a part number.