How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Plastic and Rubber Tubing
More
About Hose
More
Enclosed Reels with Low-Pressure Water Hose
Protect your hose when it's not in use. Pull the hose out of the reel and it locks in place; give it a quick tug and it retracts. Hose is PVC, which is lightweight and easy to handle. Fittings that swivel until tightened are easy to install.
Reels with Garden Hose
Reels are enclosed to protect your hose when it's not in use. Hose is lightweight, nonmarring PVC. Fittings that swivel until tightened are easy to install.
Automatic-Winding Reel—Pull the hose out slowly and it catches so you only unwind the length you need. Give it a quick tug and the hose rewinds. The wall-mount bracket allows the reel to swivel.
Reel | Hose | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Size | Fittings | ID | OD | Lg., ft. | Max. Pressure | Color | Each | |
PVC Hose  | |||||||||||
Automatic Winding | |||||||||||
| 18 1/2" | 9" | 20 1/2" | 3/4 × 3/4 | Brass Threaded GHT Male × Brass Threaded GHT Female | 1/2" | 3/4" | 60 | 150 psi @ 72° F | Green | 0000000 | 0000000 |
Suction Water Hose with Cam-and-Groove Socket and Plug
- Temperature Range: -10° to 140° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: PVC
- Color: Clear or Green
Draw water out of pits, loading docks, and other areas prone to flooding through lines connected by cam-and-groove fittings. Made of PVC, this hose is lighter than rubber hose, so it's easier to handle. It has a spiral reinforcement to avoid losing its shape when hooked up to a vacuum pump. The interior is smooth for obstruction-free flow. To connect fittings, insert the plug into the socket and push the levers down.
Clear hose lets you monitor flow.
| Coupling Size | ID | OD | Bend Radius | Max. Pressure | Color | 5 ft. | 10 ft. | 15 ft. | 20 ft. | 25 ft. | 30 ft. | 50 ft. | 100 ft. | |
Polypropylene Cam-and-Groove Female Socket × Polypropylene Cam-and-Groove Male Plug | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/4 × 3/4 | 3/4" | 1" | 3" | 100 psi @ 72° F | Clear | 0000000 | ||||||||
| 1 × 1 | 1" | 1 1/4" | 3" | 85 psi @ 72° F | Clear | 0000000 | ||||||||
| 1 × 1 | 1" | 1 1/4" | 3" | 85 psi @ 72° F | Green | 0000000 | ||||||||
| 1 1/2 × 1 1/2 | 1 1/2" | 1 13/16" | 5" | 70 psi @ 72° F | Clear | 0000000 | ||||||||
| 1 1/2 × 1 1/2 | 1 1/2" | 1 13/16" | 5" | 70 psi @ 72° F | Green | 0000000 | ||||||||
| 2 × 2 | 2" | 2 5/16" | 7" | 65 psi @ 72° F | Clear | 0000000 | ||||||||
| 2 × 2 | 2" | 2 5/16" | 7" | 65 psi @ 72° F | Green | 0000000 | ||||||||
| 3 × 3 | 3" | 3 7/16" | 10" | 60 psi @ 72° F | Clear | 0000000 | ||||||||
| 3 × 3 | 3" | 3 7/16" | 10" | 60 psi @ 72° F | Green | 0000000 | ||||||||
| 4 × 4 | 4" | 4 1/2" | 15" | 50 psi @ 72° F | Clear | 0000000 | ||||||||
| 4 × 4 | 4" | 4 1/2" | 15" | 50 psi @ 72° F | Green | 0000000 | ||||||||
Hard Plastic Tubing for Air and Water
This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.
Semi-clear tubing gives you a limited view inside the line.
- Semi-Flexible
- Compatible with Compression and Push to Connect Tube Fittings
- Hard (Rockwell R93)
- Temperature Range: 40° to 200° F
| ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Color | Lengths, ft. | Per Ft. | |
Inch | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/32" | 1/16" | 1/64" | 2" | 135 psi @ 72° F | White | 100 | 00000000 | 00000 |
| 1/16" | 1/8" | 1/32" | 2" | 135 psi @ 72° F | White | 0000000 | 000 | |
| 1/8" | 3/16" | 1/32" | 2" | 115 psi @ 72° F | White | 0000000 | 000 | |
| 1/8" | 1/4" | 1/16" | 1 1/2" | 250 psi @ 72° F | White | 0000000 | 0000 | |
| 11/64" | 1/4" | 3/64" | 2" | 170 psi @ 72° F | White | 0000000 | 000 | |
| 3/16" | 1/4" | 1/32" | 1 1/2" | 115 psi @ 72° F | White | 00000000 | 0000 | |
| 3/16" | 5/16" | 1/16" | 1 1/2" | 200 psi @ 72° F | White | 0000000 | 0000 | |
| 1/4" | 5/16" | 1/32" | 2" | 110 psi @ 72° F | White | 00000000 | 0000 | |
| 1/4" | 3/8" | 1/16" | 1 3/4" | 170 psi @ 72° F | White | 0000000 | 0000 | |
| 3/8" | 1/2" | 1/16" | 2 1/2" | 120 psi @ 72° F | White | 0000000 | 0000 | |
| 1/2" | 5/8" | 1/16" | 3 1/2" | 90 psi @ 72° F | White | 0000000 | 0000 | |
| 5/8" | 3/4" | 1/16" | 3 1/2" | 80 psi @ 72° F | White | 0000000 | 0000 | |
| 3/4" | 1" | 1/8" | 6 1/2" | 140 psi @ 72° F | White | 0000000 | 0000 | |
| 1" | 1 1/4" | 1/8" | 8 1/2" | 100 psi @ 72° F | White | 0000000 | 0000 | |
Metric | ||||||||
| 2.4mm | 4mm | 0.8mm | 50mm | 125 psi @ 72° F | White | 00000000 | 000 | |
| 4mm | 6mm | 1mm | 60mm | 145 psi @ 72° F | White | 0000000 | 0000 | |
| 5mm | 8mm | 1.5mm | 50mm | 115 psi @ 72° F | White | 00000000 | 0000 | |
| 6mm | 8mm | 1mm | 70mm | 100 psi @ 72° F | White | 0000000 | 0000 | |
| 6.5mm | 10mm | 1.75mm | 45mm | 170 psi @ 72° F | White | 00000000 | 0000 | |
| 8mm | 10mm | 1mm | 75mm | 80 psi @ 72° F | White | 0000000 | 0000 | |
| 8mm | 12mm | 2mm | 65mm | 125 psi @ 72° F | White | 00000000 | 0000 | |
| 10mm | 12mm | 1mm | 85mm | 60 psi @ 72° F | White | 0000000 | 0000 | |
| 12mm | 14mm | 1mm | 90mm | 50 psi @ 72° F | White | 0000000 | 0000 | |
Crack-Resistant Hard Plastic Tubing for Air and Water
- Semi-Flexible
- Compatible with Compression Tube Fittings
- Hard (Durometer 65D)
Made of resilient polypropylene, this tubing won’t crack due to stress or impact. Tubing is semi-clear, so you get a limited view inside the line. It is semi-flexible, so it is good for gradual bends.
| ID | OD | Wall Thick. | Max. Pressure | Color | Lengths, ft. | Per Ft. | |
Semi-Clear Polypropylene Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 1/8" | 1/4" | 1/16" | 270 psi @ 72° F | White | 000000 | 00000 | |
| 11/64" | 1/4" | 3/64" | 300 psi @ 72° F | White | 000000 | 000 | |
| 3/16" | 5/16" | 1/16" | 190 psi @ 72° F | White | 000000 | 000 | |
| 1/4" | 3/8" | 1/16" | 310 psi @ 72° F | White | 000000 | 000 | |
| 3/8" | 1/2" | 1/16" | 230 psi @ 72° F | White | 000000 | 0000 | |
| 1/2" | 5/8" | 1/16" | 80 psi @ 72° F | White | 000000 | 000 | |
| 5/8" | 3/4" | 1/16" | 70 psi @ 72° F | White | 000000 | 0000 | |
| 3/4" | 1" | 1/8" | 110 psi @ 72° F | White | 000000 | 0000 | |
| 13/16" | 1" | 3/32" | 80 psi @ 72° F | White | 000000 | 0000 | |
| 1" | 1 1/4" | 1/8" | 80 psi @ 72° F | White | 0000000 | 0000 | |
| 1 1/4" | 1 1/2" | 1/8" | 70 psi @ 72° F | White | 0000000 | 0000 | |
Cleaned and Bagged High-Purity Hard Plastic Tubing
Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it. Tubing is semi-flexible, so it is good for gradual bends. It is FDA compliant for contact with food.
Polypropylene tubing has better chemical resistance than PFA tubing to handle a wide variety of acids and other harsh substances. It is semi-clear, so you get a limited view inside the line.
- Semi-Flexible
- Compatible with Push to Connect Tube Fittings
- Hard (Rockwell R93)
- Temperature Range: 40° to 200° F
- Specifications Met: FDA Compliant 21 CFR 177.1520
| ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Color | 5 ft. | 10 ft. | 25 ft. | 50 ft. | 100 ft. | |
Inch | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 1/4" | 1/16" | 1 1/2" | 250 psi @ 72° F | White | 0000000 | |||||
| 1/4" | 3/8" | 1/16" | 1 1/2" | 175 psi @ 72° F | White | 0000000 | |||||
| 3/8" | 1/2" | 1/16" | 2" | 125 psi @ 72° F | White | 0000000 | |||||
Metric | |||||||||||
| 4mm | 6mm | 1mm | 60mm | 145 psi @ 72° F | White | 0000000 | |||||
| 6mm | 8mm | 1mm | 70mm | 105 psi @ 72° F | White | 0000000 | |||||
| 8mm | 10mm | 1mm | 75mm | 80 psi @ 72° F | White | 0000000 | |||||
| 10mm | 12mm | 1mm | 85mm | 60 psi @ 72° F | White | 0000000 | |||||
| 12mm | 14mm | 1mm | 90mm | 50 psi @ 72° F | White | 0000000 | |||||
Semi-Flexible Plastic Pipe for Water
- For Use With: Beverage, Drinking Water, Food, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D3350, NSF/ANSI 61
- Fittings: Use Nylon Plastic, Polypropylene Plastic, PVC Plastic
While not as flexible as soft tubing, this pipe can still bend around objects, resulting in fewer connection points in your line. Fewer connection points not only shortens installation time, but also allows for smoother flow through the line. Pipe connects to barbed pipe fittings with a clamp (sold separately). It is made of high-density polyethylene (HDPE) for excellent strength and corrosion resistance. It meets NSF/ANSI Standard 61 for drinking water and ASTM D3350 specifications and testing requirements for material quality.
Bend radius is the point to which you can bend pipe or tubing without damaging it. The smaller the measurement, the better the bend.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
| Lg. | OD | ID | Wall Thick. | Bend Radius | Material | Color | Max. Pressure | Each | |
1/2 Pipe Size | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 5 ft. | 3/4" | 0.622" | 0.069" | 15 13/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 000000 |
| 10 ft. | 3/4" | 0.622" | 0.069" | 15 13/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 25 ft. | 3/4" | 0.622" | 0.069" | 15 13/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 100 ft. | 3/4" | 0.622" | 0.069" | 15 13/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
3/4 Pipe Size | |||||||||
| 5 ft. | 1 1/64" | 0.824" | 0.092" | 20 23/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 10 ft. | 1 1/64" | 0.824" | 0.092" | 20 23/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 25 ft. | 1 1/64" | 0.824" | 0.092" | 20 23/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 100 ft. | 1 1/64" | 0.824" | 0.092" | 20 23/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
1 Pipe Size | |||||||||
| 5 ft. | 1 1/4" | 1.049" | 0.117" | 25 55/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 10 ft. | 1 1/4" | 1.049" | 0.117" | 25 55/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 25 ft. | 1 1/4" | 1.049" | 0.117" | 25 55/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 100 ft. | 1 1/4" | 1.049" | 0.117" | 25 55/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 000000 |
1 1/4 Pipe Size | |||||||||
| 5 ft. | 1 21/32" | 1.38" | 0.153" | 33 15/16" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 10 ft. | 1 21/32" | 1.38" | 0.153" | 33 15/16" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 25 ft. | 1 21/32" | 1.38" | 0.153" | 33 15/16" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 000000 |
| 100 ft. | 1 21/32" | 1.38" | 0.153" | 33 15/16" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 000000 |
1 1/2 Pipe Size | |||||||||
| 5 ft. | 1 31/32" | 1.61" | 0.179" | 39 9/16" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 10 ft. | 1 31/32" | 1.61" | 0.179" | 39 9/16" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 25 ft. | 1 31/32" | 1.61" | 0.179" | 39 9/16" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 000000 |
| 100 ft. | 1 31/32" | 1.61" | 0.179" | 39 9/16" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 000000 |
2 Pipe Size | |||||||||
| 5 ft. | 2 1/2" | 2.067" | 0.23" | 50 47/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 10 ft. | 2 1/2" | 2.067" | 0.23" | 50 47/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| 25 ft. | 2 1/2" | 2.067" | 0.23" | 50 47/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 000000 |
| 100 ft. | 2 1/2" | 2.067" | 0.23" | 50 47/64" | Polyethylene Plastic | Black | 200 psi @ 72° F | 0000000 | 000000 |
Underground Snap-Lock Polyethylene Pipe for Drain, Waste, and Vent
- For Use With: Water
- Specifications Met: ASTM F667
Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications. Made of high-density polyethylene (HDPE), it stands up to freeze/thaw cycles and resists corrosion and stress cracking. Pipe is corrugated inside and out for flexibility. It meets ASTM F667 specifications and testing requirements for material quality as well as soil conservation service (SCS) standards for use in underground drain lines.
Nonperforated pipe allows you to flow drainage to one area. Perforated pipe has slits along the entire length that allow drainage to be dispersed.
Female/male ends connect to female or male snap-lock fittings. Male ends allow you to join two lengths of pipe without the need for a fitting.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas. Do not expose pipe to direct sunlight.
