Made for use with food, water, and beverage, these pumps have a sanitary quick-clamp discharge connection for easy cleaning. Wetted parts are FDA compliant. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Automatically control output from a distance using a variety of analog and digital signals, including 4-20mA and external pulse signals. Pumps can also be controlled manually, run on a schedule, or set to cycle on and off. View flow rate on the LED display. These pumps handle pressures four times higher than standard pumps. They meter a consistent amount of liquid within ±1% of the maximum flow. Often used in boiler feed systems and water treatment, they're compatible with chemicals such as cleaning fluids and acid-washing solutions. Pumps are self-priming and create suction to draw liquid upward. They can run dry.

Also known as plunger pumps, these can provide pressures up to 3,000 psi. Use them for washdowns, drain jetting, and other pressurized water-spraying applications. Connect them directly to an electric motor to alter the pump speed. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.

With a higher pressure than other air-powered drum pumps, these pumps move thick chemicals with a viscosity of up to 5,000 centipoise. A stainless steel housing stands up to acids, solvents, and other caustics. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Use these pumps to move lubricating oil, such as motor oil. Spout is removable and can be replaced with a garden hose.

A 316 stainless steel housing makes these pumps resistant to coolants such as ethylene glycol.

Pump Repair Kits—Repair kits include a gasket, a packing gland, a piston, a piston washer, and a push-on nut.

Made with PTFE components, these pumps stand up to aggressive chemicals our other drum pumps can't, such as hydrochloric acid, bleach, sodium hydroxide, and methyl ethyl ketone (MEK). A stopcock prevents fluid and vapor from leaking after use.

A lever handle maximizes output with each stroke for low-effort dispensing.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow. Pressurize your container with a few pumps of the plunger handle, and use the one-touch nozzle to manage flow. Hold down the nozzle for intermittent dispensing, open the nozzle fully for continuous flow, and close the nozzle to stop flow entirely.

Tap Kits—Remote tap kits extend your pump's reach for transferring liquid to tanks, mixers, and sprayers.

Designed to move low volumes of caustic liquids in confined areas, these pumps have a thin intake tube and a small handle. They are often used to pump cleaning fluids, acid-washing solutions, and bleach.

Use these pumps in food and beverage applications.