Filter by
Material
For Material Thickness
Fastener Head Type
Mandrel Material
Length
Head Diameter
Shear Strength
Tensile Strength
REACH
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Aluminum Domed Head Sealing Blind Rivets
 |
Installed |
Lightweight and nonmagnetic, these rivets have good corrosion resistance. The body deforms to seal the bottom of the rivet and prevent water and air from passing through. They provide higher shear and tensile strengths than standard blind rivets and the portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Use blind rivets to fasten material when you only have access to one side. A low-profile domed head creates a finished appearance.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
Aluminum Mandrel
 |
For Material Thickness—The combined thickness of material must fall within the rivet's material thickness range.
Shear Strength—Shear strength is the amount of force it takes to break a rivet from the side.
Tensile Strength—Tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
For Material Thk. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbf | Tensile Strength, lbf | Material | Specs. Met | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Diameter | ||||||||||||||
| 0.032" to 0.062" | 0.297" | 0.129" to 0.133" | 30 Ga. | 0.248" | 0.051" | 100 | 110 | 1100 Aluminum | IFI-114 | 100 | 97524A158 | 000000 | ||
| 0.063" to 0.125" | 0.301" | 0.129" to 0.133" | 30 Ga. | 0.248" | 0.051" | 100 | 110 | 1100 Aluminum | IFI-126 | 100 | 97524A030 | 00000 | ||
| 0.126" to 0.187" | 0.362" | 0.129" to 0.133" | 30 Ga. | 0.248" | 0.051" | 100 | 110 | 1100 Aluminum | IFI-126 | 100 | 97524A031 | 00000 | ||
| 0.188" to 0.25" | 0.425" | 0.129" to 0.133" | 30 Ga. | 0.248" | 0.051" | 100 | 110 | 1100 Aluminum | IFI-126 | 100 | 97524A032 | 00000 | ||
| 0.251" to 0.312" | 0.547" | 0.129" to 0.133" | 30 Ga. | 0.248" | 0.051" | 100 | 110 | 1100 Aluminum | IFI-126 | 100 | 97524A147 | 00000 | ||
| 0.313" to 0.375" | 0.61" | 0.129" to 0.133" | 30 Ga. | 0.248" | 0.051" | 100 | 110 | 1100 Aluminum | IFI-126 | 100 | 97524A148 | 00000 | ||
5/32" Diameter | ||||||||||||||
| 0.02" to 0.125" | 0.375" | 0.16" to 0.164" | 20 Ga. | 0.327" | 0.066" | 100 | 110 | 1100 Aluminum | IFI-126 | 100 | 97524A149 | 00000 | ||
| 0.126" to 0.187" | 0.437" | 0.16" to 0.164" | 20 Ga. | 0.327" | 0.066" | 100 | 110 | 1100 Aluminum | IFI-114 | 50 | 97524A159 | 0000 | ||
| 0.188" to 0.25" | 0.44" | 0.16" to 0.164" | 20 Ga. | 0.327" | 0.066" | 150 | 240 | 1100 Aluminum | IFI-126 | 50 | 97524A114 | 00000 | ||
| 0.251" to 0.312" | 0.562" | 0.16" to 0.164" | 20 Ga. | 0.327" | 0.066" | 100 | 110 | 1100 Aluminum | IFI-114 | 50 | 97524A161 | 00000 | ||
3/16" Diameter | ||||||||||||||
| 0.063" to 0.125" | 0.33" | 0.192" to 0.196" | 11 Ga. | 0.393" | 0.081" | 210 | 250 | 1100 Aluminum | IFI-126 | 50 | 97524A033 | 00000 | ||
| 0.126" to 0.25" | 0.455" | 0.192" to 0.196" | 11 Ga. | 0.393" | 0.081" | 210 | 250 | 1100 Aluminum | IFI-126 | 50 | 97524A034 | 00000 | ||
| 0.251" to 0.375" | 0.58" | 0.192" to 0.196" | 11 Ga. | 0.393" | 0.081" | 210 | 250 | 1100 Aluminum | IFI-126 | 50 | 97524A116 | 00000 | ||
| 0.376" to 0.5" | 0.705" | 0.192" to 0.196" | 11 Ga. | 0.393" | 0.081" | 210 | 250 | 1100 Aluminum | IFI-126 | 50 | 97524A117 | 00000 | ||
| 0.501" to 0.625" | 0.906" | 0.192" to 0.196" | 11 Ga. | 0.393" | 0.081" | 210 | 250 | 1100 Aluminum | IFI-126 | 50 | 97524A151 | 00000 | ||
Steel Mandrel
|
For Material Thickness—The combined thickness of material must fall within the rivet's material thickness range.
Shear Strength—Shear strength is the amount of force it takes to break a rivet from the side.
Tensile Strength—Tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
For Material Thk. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbf | Tensile Strength, lbf | Material | Specs. Met | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Diameter | ||||||||||||||
| 0.032" to 0.062" | 0.237" | 0.129" to 0.133" | 30 Ga. | 0.248" | 0.051" | 300 | 380 | 5056 Aluminum | IFI-126 | 100 | 97524A019 | 000000 | ||
| 0.063" to 0.125" | 0.301" | 0.129" to 0.133" | 30 Ga. | 0.248" | 0.051" | 300 | 380 | 5056 Aluminum | IFI-126 | 100 | 97524A020 | 00000 | ||
| 0.126" to 0.187" | 0.362" | 0.129" to 0.133" | 30 Ga. | 0.248" | 0.051" | 300 | 380 | 5056 Aluminum | IFI-126 | 100 | 97524A021 | 00000 | ||
| 0.188" to 0.25" | 0.425" | 0.129" to 0.133" | 30 Ga. | 0.248" | 0.051" | 300 | 380 | 5056 Aluminum | IFI-126 | 100 | 97524A024 | 00000 | ||
| 0.251" to 0.312" | 0.487" | 0.129" to 0.133" | 30 Ga. | 0.272" | 0.051" | 300 | 380 | 5056 Aluminum | IFI-126 | 100 | 97524A025 | 00000 | ||
| 0.313" to 0.375" | 0.55" | 0.129" to 0.133" | 30 Ga. | 0.272" | 0.051" | 300 | 380 | 5056 Aluminum | IFI-126 | 100 | 97524A026 | 00000 | ||
| 0.376" to 0.5" | 0.675" | 0.129" to 0.133" | 30 Ga. | 0.272" | 0.051" | 300 | 380 | 5056 Aluminum | IFI-126 | 100 | 97524A027 | 00000 | ||
5/32" Diameter | ||||||||||||||
| 0.063" to 0.125" | 0.315" | 0.16" to 0.164" | 20 Ga. | 0.327" | 0.066" | 430 | 600 | 5056 Aluminum | IFI-126 | 100 | 97524A103 | 00000 | ||
| 0.126" to 0.187" | 0.337" | 0.16" to 0.164" | 20 Ga. | 0.327" | 0.066" | 430 | 600 | 5056 Aluminum | IFI-126 | 100 | 97524A104 | 00000 | ||
| 0.251" to 0.312" | 0.502" | 0.16" to 0.164" | 20 Ga. | 0.327" | 0.066" | 430 | 600 | 5056 Aluminum | IFI-126 | 50 | 97524A105 | 00000 | ||
3/16" Diameter | ||||||||||||||
| 0.063" to 0.125" | 0.33" | 0.192" to 0.196" | 11 Ga. | 0.393" | 0.081" | 570 | 840 | 5056 Aluminum | IFI-126 | 100 | 97524A106 | 00000 | ||
| 0.126" to 0.187" | 0.392" | 0.192" to 0.196" | 11 Ga. | 0.393" | 0.081" | 570 | 840 | 5056 Aluminum | IFI-126 | 50 | 97524A035 | 00000 | ||
| 0.188" to 0.25" | 0.455" | 0.192" to 0.196" | 11 Ga. | 0.393" | 0.081" | 570 | 840 | 5056 Aluminum | IFI-126 | 50 | 97524A029 | 00000 | ||
| 0.313" to 0.375" | 0.58" | 0.192" to 0.196" | 11 Ga. | 0.393" | 0.081" | 570 | 840 | 5056 Aluminum | IFI-126 | 50 | 97524A107 | 00000 | ||
| 0.376" to 0.5" | 0.705" | 0.192" to 0.196" | 11 Ga. | 0.393" | 0.081" | 570 | 840 | 5056 Aluminum | IFI-126 | 50 | 97524A108 | 00000 | ||
1/4" Diameter | ||||||||||||||
| 0.126" to 0.25" | 0.485" | 0.257" to 0.261" | F | 0.525" | 0.099" | 900 | 1,100 | 5056 Aluminum | IFI-126 | 50 | 97524A109 | 00000 | ||
| 0.251" to 0.375" | 0.61" | 0.257" to 0.261" | F | 0.525" | 0.099" | 900 | 1,100 | 5056 Aluminum | IFI-126 | 25 | 97524A110 | 00000 | ||
18-8 Stainless Steel Domed Head Sealing Blind Rivets
|
Installed |
18-8 stainless steel rivets have good corrosion resistance and may be mildly magnetic. The body deforms to seal the bottom of the rivet and prevent water and air from passing through. They provide higher shear and tensile strengths than standard blind rivets and the portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Use blind rivets to fasten material when you only have access to one side. A low-profile domed head creates a finished appearance.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
410 Stainless Steel Mandrel
 |
For Material Thickness—The combined thickness of material must fall within the rivet's material thickness range.
Shear Strength—Shear strength is the amount of force it takes to break a rivet from the side.
Tensile Strength—Tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
For Material Thk. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbf | Tensile Strength, lbf | Material | Specs. Met | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Diameter | ||||||||||||||
| 0.125" to 0.188" | 0.385" | 0.129" to 0.133" | 30 Ga. | 0.262" | 0.05" | 400 | 450 | 18-8 Stainless Steel | IFI-126 | 25 | 97524A040 | 000000 | ||
5/32" Diameter | ||||||||||||||
| 0.125" to 0.188" | 0.402" | 0.16" to 0.164" | 20 Ga. | 0.338" | 0.065" | 700 | 800 | 18-8 Stainless Steel | IFI-126 | 10 | 97524A042 | 00000 | ||
420 Stainless Steel Mandrel
|
For Material Thickness—The combined thickness of material must fall within the rivet's material thickness range.
Shear Strength—Shear strength is the amount of force it takes to break a rivet from the side.
Tensile Strength—Tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
For Material Thk. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbf | Tensile Strength, lbf | Material | Specs. Met | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Diameter | ||||||||||||||
| 0.031" to 0.063" | 0.297" | 0.129" to 0.133" | 30 Ga. | 0.252" | 0.05" | 400 | 450 | 18-8 Stainless Steel | IFI-126 | 50 | 97524A136 | 000000 | ||
| 0.063" to 0.125" | 0.36" | 0.129" to 0.133" | 30 Ga. | 0.252" | 0.05" | 400 | 450 | 18-8 Stainless Steel | IFI-126 | 25 | 97524A137 | 0000 | ||
| 0.188" to 0.252" | 0.485" | 0.129" to 0.133" | 30 Ga. | 0.252" | 0.05" | 400 | 450 | 18-8 Stainless Steel | IFI-126 | 25 | 97524A138 | 0000 | ||
| 0.25" to 0.312" | 0.547" | 0.129" to 0.133" | 30 Ga. | 0.252" | 0.05" | 400 | 450 | 18-8 Stainless Steel | IFI-126 | 25 | 97524A139 | 0000 | ||
| 0.313" to 0.375" | 0.61" | 0.129" to 0.133" | 30 Ga. | 0.252" | 0.05" | 400 | 450 | 18-8 Stainless Steel | IFI-126 | 50 | 97524A121 | 00000 | ||
| 0.376" to 0.5" | 0.735" | 0.129" to 0.133" | 30 Ga. | 0.252" | 0.05" | 400 | 450 | 18-8 Stainless Steel | IFI-126 | 25 | 97524A142 | 00000 | ||
5/32" Diameter | ||||||||||||||
| 0.031" to 0.125" | 0.375" | 0.16" to 0.164" | 20 Ga. | 0.328" | 0.065" | 700 | 800 | 18-8 Stainless Steel | IFI-126 | 25 | 97524A141 | 0000 | ||
| 0.188" to 0.25" | 0.5" | 0.16" to 0.164" | 20 Ga. | 0.328" | 0.065" | 700 | 800 | 18-8 Stainless Steel | IFI-126 | 25 | 97524A153 | 00000 | ||
| 0.251" to 0.375" | 0.562" | 0.16" to 0.164" | 20 Ga. | 0.328" | 0.065" | 700 | 800 | 18-8 Stainless Steel | IFI-126 | 50 | 97524A143 | 00000 | ||
| 0.376" to 0.5" | 0.75" | 0.16" to 0.164" | 20 Ga. | 0.328" | 0.065" | 700 | 800 | 18-8 Stainless Steel | IFI-126 | 25 | 97524A313 | 00000 | ||
3/16" Diameter | ||||||||||||||
| 0.02" to 0.125" | 0.406" | 0.192" to 0.196" | 11 Ga. | 0.375" | 0.06" | 850 | 900 | 18-8 Stainless Steel | IFI-126 | 10 | 97524A044 | 0000 | ||
| 0.125" to 0.187" | 0.468" | 0.192" to 0.196" | 11 Ga. | 0.394" | 0.08" | 850 | 900 | 18-8 Stainless Steel | IFI-126 | 25 | 97524A154 | 00000 | ||
| 0.188" to 0.25" | 0.531" | 0.192" to 0.196" | 11 Ga. | 0.375" | 0.06" | 850 | 900 | 18-8 Stainless Steel | IFI-126 | 10 | 97524A046 | 0000 | ||
| 0.251" to 0.375" | 0.656" | 0.192" to 0.196" | 11 Ga. | 0.394" | 0.08" | 850 | 900 | 18-8 Stainless Steel | IFI-126 | 10 | 97524A155 | 0000 | ||
| 0.376" to 0.5" | 0.781" | 0.192" to 0.196" | 11 Ga. | 0.394" | 0.08" | 850 | 900 | 18-8 Stainless Steel | IFI-126 | 10 | 97524A156 | 0000 | ||
| 0.501" to 0.625" | 0.906" | 0.192" to 0.196" | 11 Ga. | 0.375" | 0.06" | 850 | 900 | 18-8 Stainless Steel | IFI-126 | 25 | 97524A144 | 00000 | ||
| 0.626" to 0.75" | 1.026" | 0.192" to 0.196" | 11 Ga. | 0.394" | 0.08" | 850 | 900 | 18-8 Stainless Steel | IFI-126 | 10 | 97524A157 | 0000 | ||
1/4" Diameter | ||||||||||||||
| 0.125" to 0.25" | 0.57" | 0.257" to 0.261" | F | 0.5" | 0.08" | 1,520 | 1,950 | 18-8 Stainless Steel | IFI-126 | 10 | 97524A145 | 00000 | ||
| 0.251" to 0.375" | 0.695" | 0.257" to 0.261" | F | 0.5" | 0.08" | 1,520 | 1,950 | 18-8 Stainless Steel | IFI-126 | 10 | 97524A146 | 00000 | ||
| 0.376" to 0.5" | 0.82" | 0.257" to 0.261" | F | 0.5" | 0.08" | 1,520 | 1,950 | 18-8 Stainless Steel | IFI-126 | 10 | 97524A311 | 00000 | ||
| 0.501" to 0.625" | 0.945" | 0.257" to 0.261" | F | 0.5" | 0.08" | 1,520 | 1,950 | 18-8 Stainless Steel | IFI-126 | 10 | 97524A312 | 00000 | ||
Aluminum Domed Head Sealing Blind Rivets with Plastic Seal
|
Installed |
Plastic bonded to the underside of the head creates a stronger seal than metal alone. These rivets are lightweight, nonmagnetic, and have good corrosion resistance. The body deforms to seal the bottom of the rivet and prevent water and air from passing through. They provide higher shear and tensile strengths than standard blind rivets and the portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Use blind rivets to fasten material when you only have access to one side. A low-profile domed head creates a finished appearance.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
Aluminum Mandrel
 |  |
For Material Thickness—The combined thickness of material must fall within the rivet's material thickness range.
Shear Strength—Shear strength is the amount of force it takes to break a rivet from the side.
Tensile Strength—Tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
For Material Thk. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbf | Tensile Strength, lbf | Temp. Range, ° F | Material | Sealant Material | Specs. Met | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Diameter | ||||||||||||||||
| 0.063" to 0.125" | 0.36" | 0.129" to 0.133" | 30 Ga. | 0.25" | 0.04" | 100 | 110 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A100 | 00000 | ||
| 0.126" to 0.187" | 0.422" | 0.129" to 0.133" | 30 Ga. | 0.25" | 0.04" | 100 | 110 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A150 | 00000 | ||
| 0.188" to 0.25" | 0.485" | 0.129" to 0.133" | 30 Ga. | 0.25" | 0.04" | 100 | 110 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A200 | 00000 | ||
3/16" Diameter | ||||||||||||||||
| 0.188" to 0.25" | 0.531" | 0.192" to 0.196" | 11 Ga. | 0.375" | 0.06" | 210 | 250 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A400 | 00000 | ||
| 0.251" to 0.375" | 0.656" | 0.192" to 0.196" | 11 Ga. | 0.375" | 0.06" | 210 | 250 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A450 | 00000 | ||
| 0.376" to 0.5" | 0.781" | 0.192" to 0.196" | 11 Ga. | 0.375" | 0.06" | 210 | 250 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A500 | 00000 | ||
Flush-Mount Sealing Blind Rivets
 |
Installed |
Install these rivets in countersunk holes and the angled head sits flush with the material's surface. The body deforms to seal the bottom of the rivet and prevent water and air from passing through. They provide higher shear and tensile strengths than standard blind rivets and the portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Made of aluminum, rivets are lightweight, nonmagnetic, and have good corrosion resistance. Use to join material when you only have access to one side.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
Steel Mandrel
 |  |
For Material Thickness—The combined thickness of material must fall within the rivet's material thickness range.
Shear Strength—Shear strength is the amount of force it takes to break a rivet from the side.
Tensile Strength—Tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
For Material Thk. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Countersink Angle | Shear Strength, lbf | Tensile Strength, lbf | Material | Specs. Met | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Diameter | |||||||||||||||
| 0.063" to 0.125" | 0.341" | 0.129" to 0.133" | 30 Ga. | 0.245" | 0.055" | 120° | 300 | 380 | 5056 Aluminum | IFI-126 | 100 | 97524A050 | 000000 | ||
| 0.126" to 0.187" | 0.402" | 0.129" to 0.133" | 30 Ga. | 0.245" | 0.055" | 120° | 300 | 380 | 5056 Aluminum | IFI-126 | 100 | 97524A055 | 00000 | ||
| 0.188" to 0.25" | 0.466" | 0.129" to 0.133" | 30 Ga. | 0.245" | 0.055" | 120° | 300 | 380 | 5056 Aluminum | IFI-114 | 100 | 97524A172 | 00000 | ||
| 0.251" to 0.312" | 0.582" | 0.129" to 0.133" | 30 Ga. | 0.245" | 0.055" | 120° | 240 | 280 | 5056 Aluminum | IFI-114 | 50 | 97524A162 | 0000 | ||
5/32" Diameter | |||||||||||||||
| 0.188" to 0.312" | 0.612" | 0.16" to 0.164" | 20 Ga. | 0.327" | 0.055" | 120° | 240 | 280 | 5056 Aluminum | IFI-114 | 50 | 97524A163 | 0000 | ||
3/16" Diameter | |||||||||||||||
| 0.126" to 0.25" | 0.52" | 0.192" to 0.196" | 11 Ga. | 0.395" | 0.065" | 120° | 570 | 840 | 5056 Aluminum | IFI-126 | 50 | 97524A065 | 00000 | ||
| 0.251" to 0.375" | 0.645" | 0.192" to 0.196" | 11 Ga. | 0.395" | 0.065" | 120° | 570 | 840 | 5056 Aluminum | IFI-126 | 50 | 97524A070 | 00000 | ||
