For comprehensive system checks and quality control, these meters measure a wider relative humidity range than pocket meters.

To ensure reliable readings on the go, this portable meter comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy.

The probe is attached to a 3-ft. cable for checking humidity, temperature, and dew point in hard-to-reach areas.

Obtain continuous temperature measurements from a wet-bulb and a dry-bulb thermometer to determine relative humidity. This wall-mount psychrometer consists of two mercury-free fluid-filled thermometers, a wick, a glass water bulb, and a relative humidity calculation table.

Monitor relative humidity, temperature, and dew point inside sealed containers. These meters are rated IP67, so they won't expose contents to dust and water. The housing is aluminum, which is lightweight and resists corrosion.

For technical drawings and 3-D models, click on a part number.

Use smartphones and tablets to monitor humidity and temperature within your system or facility. Connect these battery-powered transmitters to your smart device via Bluetooth, and receive data to ensure workplace conditions are suitable for processes, inventory, or personnel. Good for preventative maintenance and route-based monitoring, these transmitters let you choose how frequently you receive the data, and they’ll notify your device when humidity and temperature levels go outside of your thresholds. Download the app, set your parameters, and collect data from up to 300 ft. away. Rated IP65, they are protected against dust and washdowns.

Turn your transmitter into a portable monitoring system by attaching a quick coupling (not included). This allows fast, temporary connections for on-the-go measurements in different locations.

For technical drawings and 3-D models, click on a part number.

Monitor humidity in sealed containers without opening them, protecting the inside from contamination. These plugs are often used on plastic bags, storage containers, and electrical housings. Consisting of a mounting nut and two gaskets for a tight seal, these plugs install through a hole in a flexible barrier. Remove one gasket and reverse the nut to install plugs in a rigid container. Watch the indicator disc through the nut’s viewing window—it will change color as humidity rises and falls. Made of anodized aluminum, these plugs resist corrosion and are lightweight. They meet military and SAE standards for humidity indicators.

For technical drawings and 3-D models, click on a part number.

These lightweight windsocks react to the slightest wind movements.

To replace an existing windsock, you must determine the inlet diameter. Lay the windsock flat to measure the inlet and multiply by 0.63 for the inlet diameter.

Individual windsocks come with mounting ties.

Windsock kits come with everything you need for mounting, including an inlet frame, pole, mounting ties, and brackets.

Use these sturdy windsocks to track stronger wind movements than low-velocity windsocks. Inlet frames are sold separately.

To replace an existing windsock, you must determine the inlet diameter. Lay the windsock flat to measure the inlet and multiply by 0.63 for the inlet diameter.

A built-in temperature sensor and a remote-reading probe simultaneously monitor indoor and outdoor temperature.

Monitor your environment when working outdoors. These wristwatches display time, date, temperature, barometric pressure, and altitude. It also has a stopwatch and digital compass.

Check temperature, relative humidity, atmospheric pressure, and time with one barometer. The included remote sensor has a 200-ft. wireless transmission range for monitoring outdoor temperature and relative humidity in addition to indoor conditions.

Measure atmospheric pressure changes in both inches of mercury (Hg) and millibars (mbar).

Take field measurements of temperature, dew point, heat index, wind chill, wind speed, and relative humidity.

Monitor nine different weather conditions up to 1,000 feet away. The outdoor weather sensor measures outdoor temperature, humidity, wind speed and direction, rainfall rate, total rainfall, barometric pressure, heat index, wind chill, and dew point. It wirelessly transmits readings to the console by radio signal. Console has built-in sensors to measure indoor temperature and humidity. Console can be placed on a desk or mounted to a wall. They cannot be sold to the listed areas due to product registration requirements.

Operates on 8-15 VDC. Output is pulse for wind speed and analog voltage for wind direction. Optional line driver converts the output into 4-20 mA for use with standard PLCs (programmable logic controllers).

Keep your phone in your pocket and your hands free—these smartwatches perform a variety of functions on your wrist. They connect to Apple and Android phones via Bluetooth, informing you when calls, texts, and other notifications arrive. Designed for harsh environments and rugged use, they meet military standards for resistance to hot and cold temperatures, shock, splashes, and submersion in up to 100 meters of water. These watches have a compass and GPS for tasks such as navigation, tracking and saving location coordinates, and calculating the area of a location by walking the perimeter. With weather and elevation monitoring, you can set the rate of barometric pressure change that will trigger a storm alert. These watches track health and fitness metrics over time, including heartrate, blood oxygen levels, and exercise. They have a solar battery in addition to a rechargeable lithium-ion one to extend the time between plug-in charging.