Material Material |
|---|
|
Capacity Capacity |
|---|
|
Movement Movement |
|---|
 |  |
| Rigid | 180° Pivot |
 | |
| 360° Swivel |
Mounting Hole Center-to-Center Length Mounting Hole Center-to-Center Length |
|---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Base Material Base Material |
|---|
|
Ring Material Ring Material |
|---|
|
Finish Finish |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Webbing Anchor Plates
Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.
Zinc-plated steel plates have mild corrosion resistance.
18-8 stainless steel plates have good corrosion resistance.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Capacity, lbs. | Lg. | Wd. | Mounting Fasteners Included | No. of | Dia. | Each | |
Zinc-Plated Steel | ||||||||
| 1" | 330 | 2 1/16" | 1 9/16" | No | 1 | 1/2" | 0000000 | 00000 |
| 1 3/4" | 5,000 | 2 7/8" | 2 3/8" | No | 1 | 25/32" | 0000000 | 00000 |
| 2" | 1,000 | 1 7/8" | 2 3/4" | No | 1 | 1/2" | 0000000 | 0000 |
18-8 Stainless Steel | ||||||||
| 1" | 500 | 2 1/16" | 1 9/16" | No | 1 | 1/2" | 0000000 | 00000 |
| 1 3/4" | 3,900 | 2 7/8" | 2 3/8" | No | 1 | 25/32" | 0000000 | 00000 |
Webbing Guides
Use these guides to prevent webbing from twisting, or use as anchor points in tie-down applications. They are also known as footman's loops.
Nylon plastic guides are chemical and oil resistant, nonconductive, and lightweight.
High-carbon steel guides are stronger and more scratch resistant than stainless steel guides. However, unfinished carbon steel is not corrosion resistant and should be used indoors.
Stainless steel guides have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Guides with a zinc plating have mild corrosion resistance. Guides with a nickel plating resist chemicals and salt water, and have a decorative metallic finish.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Capacity | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Color | Pkg. Qty. | Pkg. | |
| 5/16" | 230 lbs. | 1 7/8" | 1/2" | 1/4" | 1/4" | No | 2 | 3/16" | 1 13/32" | Black | 10 | 0000000 | 00000 |
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Low-Carbon Steel | |||||||||||
| 1" | 2 5/8" | 1/2" | 1/4" | 1/4" | No | 2 | 1/4" | 2 1/8" | 10 | 0000000 | 000000 |
| 1 1/2" | 3 1/16" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 2 5/8" | 10 | 0000000 | 00000 |
| 1 1/2" | 3 1/8" | 1/2" | 1/4" | 7/16" | No | 2 | 1/4" | 2 5/8" | 10 | 0000000 | 00000 |
| 2" | 3 5/8" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 3 1/8" | 10 | 0000000 | 00000 |
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated High-Carbon Steel | |||||||||||
| 1" | 2 5/8" | 1/2" | 1/4" | 1/4" | No | 2 | 7/32" | 2 1/8" | 1 | 0000000 | 00000 |
| 1" | 2 5/8" | 1/2" | 1/4" | 5/8" | No | 2 | 7/32" | 2 1/8" | 1 | 0000000 | 0000 |
Nickel-Plated High-Carbon Steel | |||||||||||
| 2" | 3 5/8" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 3 1/8" | 1 | 0000000 | 0000 |
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. Qty. | Pkg. | |
Dull 18-8 Stainless Steel | |||||||||||
| 1" | 2 5/8" | 7/16" | 1/4" | 1/4" | No | 2 | 3/16" | 2 1/8" | 1 | 0000000 | 00000 |
| 2" | 3 7/8" | 1/2" | 5/16" | 5/16" | No | 2 | 1/4" | 3 1/8" | 1 | 0000000 | 0000 |
| Each | |||||||||||
Polished 18-8 Stainless Steel | |||||||||||
| 1" | 2 5/8" | 1/2" | 1/4" | 1/4" | No | 2 | 1/4" | 2 1/8" | __ | 0000000 | 0000 |
| 1 1/2" | 3 1/4" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 2 5/8" | __ | 0000000 | 0000 |
| 1 1/2" | 3 1/4" | 1/2" | 1/4" | 7/16" | No | 2 | 1/4" | 2 5/8" | __ | 0000000 | 0000 |
| 2" | 3 3/4" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 3 1/8" | __ | 0000000 | 0000 |
Adhesive-Ready Webbing Guides
No need for drilling or welding—mount this guide with a structural adhesive. It has adhesive tabs to hold the guide in place temporarily during installation (adhesive for mounting is sold separately).
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Recessed Tie-Down Rings
These rings mount flush and fold down when not in use.
Straight rings have a flat section that prevents webbing from twisting.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
For Cutout | Ring | Base | Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Dp. | Dia. | For Max. Webbing Wd. | Inner Wd. | Ht. | Thick. | Dia. | Material | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | No. of | Each | |
Zinc-Plated Steel | |||||||||||||||
D-Ring and Straight Ring | |||||||||||||||
| 830 | 1" | 4 1/2" | 2" | 2 7/8", 2 1/8" | 1 1/2", 1 3/16" | 3/8", 3/8" | 6 1/4" | Zinc-Plated Steel | No | 11/32" | 3 13/16" | 3 13/16" | 4 | 0000000 | 000000 |
Swiveling Tie-Down Rings
Accommodate ties in any direction with these rings that swivel all the way around.
Style B has a loose ring that twists to minimize abrasion on webbing and rope.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Ctr.-to-Ctr. Wd. | For Mounting Screw Size | Each | |
18-8 Stainless Steel | ||||||||||||||||
| A | 200 | 5/8" | 1 5/16" | 3/16" | Round | 1 5/16" | 1 3/16" | 18-8 Stainless Steel | No | 4 | 5/32" | 3/4" | 7/8" | No. 8 | 0000000 | 00000 |
| A | 300 | 3/4" | 1 19/32" | 1/4" | Round | 1 9/16" | 1 5/16" | 18-8 Stainless Steel | No | 4 | 5/32" | 3/4" | 1" | No. 8 | 0000000 | 0000 |
| A | 480 | 3/4" | 1 23/32" | 5/16" | Round | 2" | 1 9/16" | 18-8 Stainless Steel | No | 4 | 7/32" | 1" | 1 3/8" | No. 10 | 0000000 | 0000 |
| B | 200 | 1 3/16" | 2 1/2" | 3/16" | Round | 1 5/16" | 1 3/16" | 18-8 Stainless Steel | No | 4 | 3/16" | 3/4" | 7/8" | No. 8 | 00000000 | 0000 |
| B | 300 | 1 5/8" | 3 5/32" | 1/4" | Round | 1 9/16" | 1 5/16" | 18-8 Stainless Steel | No | 4 | 1/4" | 3/4" | 1" | No. 8 | 00000000 | 0000 |
| B | 480 | 2" | 3 3/4" | 5/16" | Round | 1 3/4" | 1 9/16" | 18-8 Stainless Steel | No | 4 | 5/16" | 1" | 1 3/8" | No. 10 | 00000000 | 00000 |
Dimpled Tie-Down Rings
Dimples hold the base tight to prevent it from swiveling.
Style B has loose rings that twist to minimize abrasion on webbing and rope.
Zinc-plated steel rings have mild corrosion resistance.
304 stainless steel rings have good corrosion resistance.
316 stainless steel rings have excellent chemical and corrosion resistance, so they won’t rust in marine environments.
Warning: Never use for lifting applications.
Ring | Base | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
Style A | ||||||||||||
Zinc-Plated Steel | ||||||||||||
| 5,600 | 1 1/8" | 1 3/16" | 1/2" | Round | 2 1/2" | 1 3/4" | Zinc-Plated Steel | No | 1 | 7/16" | 00000000 | 00000 |
304 Stainless Steel | ||||||||||||
| 6,700 | 1 1/4" | 1 3/8" | 1/2" | Round | 2 1/2" | 1 3/4" | 304 Stainless Steel | No | 1 | 7/16" | 00000000 | 0000 |
316 Stainless Steel | ||||||||||||
| 5,620 | 1 1/8" | 1 3/16" | 1/2" | Round | 2 1/2" | 1 3/4" | 316 Stainless Steel | No | 1 | 7/16" | 00000000 | 00000 |
Style B | ||||||||||||
316 Stainless Steel | ||||||||||||
| 5,620 | 1 1/8" | 1 3/16" | 1/2" | Round | 2 1/2" | 1 3/4" | 316 Stainless Steel | No | 1 | 7/16" | 00000000 | 00000 |
Tie-Down Rings
These rings pivot to secure loads in various directions.
Style N have a loose ring that twists to minimize abrasion on webbing and rope.
316 stainless steel rings have excellent resistance to salt water and chemicals.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
316 Stainless Steel | |||||||||||||
| N | 5,620 | 1 5/16" | 3 1/4" | 11/16" | Round | 2" | 1 3/4" | 316 Stainless Steel | No | 1 | 3/8" | 00000000 | 000000 |
Adhesive-Back Tie-Down Rings
Create an anchor point without drilling or welding—adhesive on the back holds this ring in place. The flexible foam rubber base mounts to curved surfaces and adheres to glass, metal, and plastic.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Inner Wd. | Style | Lg. | Wd. | Material | Adhesive Type | Reaches Full Strength, hrs. | Begins to Harden, min. | Temp. Range, °F | Each | |
Polyethylene Rope | |||||||||||
| 140 | 2 1/2" | D-Ring | 3 1/8" | 2 1/2" | EVA Foam | Acrylic | 72 | 20 | -95° to 165° | 0000000 | 000000 |