Wedge-Lock Wire Rope Fittings

	For Wire Rope Diameter For Wire Rope Diameter

	For Wire Rope Construction For Wire Rope Construction


6 × 7 Fiber Core	6 × 19 Fiber Core

6 × 19 IWRC	6 × 26 IWRC

6 × 37 IWRC	7 × 7 Strand Core

7 × 19 IWRC	7 × 19 Strand Core

18 × 7 IWRC	19 × 7 Strand Core

	Clevis Inside Width Clevis Inside Width

13/16"

1 1/4"

1 1/2"

	For Pin Diameter For Pin Diameter

13/16"

1 7/32"

1 13/32"

	Specifications Met Specifications Met

ASME

Fed. Spec.

	Required Torque Required Torque

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

Forward

How can we improve?

12 Products

Wedge-Lock Wire Rope End Fittings—For Lifting

Also known as open wedge sockets, these end fittings require only a torque wrench to install. To install, wrap the wire rope around the removable wedge before securing it inside the body. A wire rope clamp attached through the top hole in the wedge secures the short (dead) end.

Two additional holes at the bottom of the wedge can be used as a "go/no go" gauge to determine the proper rope size. The wire rope should pass through the "go" hole and not through the "no go" hole.

Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

For technical drawings and 3-D models, click on a part number.

Fittings
For Wire Rope									Replacement Wedges		Replacement Pins
Dia.	Construction	Clevis Inside Wd.	For Pin Dia.	Required Torque, ft.-lbs.	Capacity	Specifications Met		Each		Each		Each
Red-Painted Steel
3/8"	18 × 7 IWRC 19 × 7 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 19 IWRC 7 × 19 Strand Core 7 × 7 Strand Core	13/16"	13/16"	45	80% of the Rope's Capacity	ASME B30.26, Fed. Spec. RR-S-550E	0000000	0000000	0000000	000000	0000000	000000
1/2"	18 × 7 IWRC 19 × 7 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 19 IWRC 7 × 19 Strand Core 7 × 7 Strand Core	1"	1"	65	80% of the Rope's Capacity	ASME B30.26, Fed. Spec. RR-S-550E	0000000	000000	0000000	00000	0000000	00000
5/8"	18 × 7 IWRC 19 × 7 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 19 IWRC 7 × 19 Strand Core 7 × 7 Strand Core	1 1/4"	1 7/32"	95	80% of the Rope's Capacity	ASME B30.26, Fed. Spec. RR-S-550E	0000000	000000	0000000	00000	0000000	00000
3/4"	18 × 7 IWRC 19 × 7 Strand Core 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 19 IWRC 7 × 19 Strand Core 7 × 7 Strand Core	1 1/2"	1 13/32"	130	80% of the Rope's Capacity	ASME B30.26, Fed. Spec. RR-S-550E	0000000	000000	0000000	00000	0000000	00000