Filter by
Manufacturer
Tip Shape
For Iron Manufacturer Model Number
Manufacturer Series
System of Measurement
Point Width
Shank Diameter
Length
Maximum Temperature
Power Source
Soldering Temperature Adjustability
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Tip Connection
Minimum Temperature
About Sanding Abrasives
More
Tips and Nozzles for Soldering and Desoldering Stations
Weller Tips for Irons
Chisel
Round
Conical
Single Flat
30° Round
Bevel
Gullwing
Knife
45° Knife
30° Chisel
25° Conical
30° Conical
45° Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | For Soldering Station with Handpiece | Each | |
ET Series | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| WEP70 | ETA | Chisel | 850° | 1 3/8" | 1/16" | Plug | Soldering | WE | __ | 0000000 | 00000 |
| WEP70 | ETAA | Round | 850° | 1 3/8" | 1/16" | Plug | Soldering | WE | __ | 00000000 | 0000 |
| WEP70 | ETB | Chisel | 850° | 1 3/8" | 3/32" | Plug | Soldering | WE | __ | 0000000 | 0000 |
| WEP70 | ETC | Chisel | 850° | 1 3/8" | 1/8" | Plug | Soldering | WE | __ | 0000000 | 0000 |
| WEP70 | ETD | Chisel | 850° | 1 3/8" | 3/16" | Plug | Soldering | WE | __ | 00000000 | 0000 |
| WEP70 | ETH | Conical | 850° | 1 3/8" | 1/32" | Plug | Soldering | WE | __ | 0000000 | 0000 |
| WEP70 | ETJ | Conical | 850° | 1 3/4" | 1/32" | Plug | Soldering | WE | __ | 00000000 | 0000 |
| WEP70 | ETL | Chisel | 850° | 1 3/4" | 5/64" | Plug | Soldering | WE | __ | 0000000 | 0000 |
| WEP70 | ETM | Chisel | 850° | 1 3/4" | 1/8" | Plug | Soldering | WE | __ | 00000000 | 0000 |
| WEP70 | ETO | Conical | 850° | 1 3/4" | 1/32" | Plug | Soldering | WE | __ | 0000000 | 0000 |
| WEP70 | ETP | Round | 850° | 1 3/8" | 1/32" | Plug | Soldering | WE | __ | 0000000 | 0000 |
| WEP70 | ETR | Chisel | 850° | 1 3/8" | 1/16" | Plug | Soldering | WE | __ | 0000000 | 0000 |
| WEP70 | ETS | Conical | 850° | 1 3/4" | 1/64" | Plug | Soldering | WE | __ | 0000000 | 0000 |
| WEP70 | ETT | Conical | 850° | 1 3/8" | 1/64" | Plug | Soldering | WE | __ | 0000000 | 0000 |
| WEP70 | ETU | Single Flat | 850° | 1 1/2" | 1/64" | Plug | Soldering | WE | __ | 00000000 | 0000 |
| WEP70 | ETV | Single Flat | 850° | 1 1/2" | 1/32" | Plug | Soldering | WE | __ | 00000000 | 0000 |
LT Series | |||||||||||
| WP80, WSP80 | 1L | Conical | 850° | 1 1/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 0000 |
| WP80, WSP80 | 1SA | Round | 850° | 19/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 00000 |
| WP80, WSP80 | 1SLX | 30° Round | 850° | 55/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 00000 |
| WP80, WSP80 | 22CP | Bevel | 850° | 25/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 0000 |
| WP80, WSP80 | 33CP | Bevel | 850° | 25/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 00000 |
| WP80, WSP80 | 4 | Bevel | 850° | 19/32" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 00000 |
| WP80, WSP80 | BB | Bevel | 850° | 21/32" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 00000 |
| WP80, WSP80 | CC 60 | Bevel | 850° | 21/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 00000 |
| WP80, WSP80 | DD 45 | Bevel | 850° | 25/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 00000 |
| WP80, WSP80 | F | Bevel | 850° | 33/64" | 15/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 0000 |
| WP80, WSP80 | GW1 | Gullwing | 850° | 45/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 0000 |
| WP80, WSP80 | GW2 | Gullwing | 850° | 45/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 00000 |
| WP80, WSP80 | KN | Knife | 850° | 21/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 00000 |
| WP80, WSP80 | KNSL | 45° Knife | 850° | 21/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 00000 |
| WP80, WSP80 | LT1S | Round | 850° | 5/8" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 0000000 | 0000 |
| WP80, WSP80 | LTA | Chisel | 850° | 3/8" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 0000000 | 0000 |
| WP80, WSP80 | LTAS | Round | 850° | 3/8" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 0000000 | 0000 |
| WP80, WSP80 | LTB | Chisel | 850° | 1/2" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 0000000 | 0000 |
| WP80, WSP80 | LTC | Chisel | 850° | 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 0000000 | 0000 |
| WP80, WSP80 | LTCS | Round | 850° | 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 0000000 | 0000 |
| WP80, WSP80 | LTD | Chisel | 850° | 1/2" | 3/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 0000 |
| WP80, WSP80 | LTK | Chisel | 850° | 13/16" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 0000 |
| WP80, WSP80 | LTL | Chisel | 850° | 13/16" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 0000 |
| WP80, WSP80 | LTS | Conical | 850° | 13/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | __ | 00000000 | 0000 |
RT Series | |||||||||||
| __ | RT1 | Conical | 850° | 4" | 1/64" | Plug | Soldering | __ | WD1000M, WD2000M with WMRP | 0000000 | 00000 |
| __ | RT2 | Conical | 850° | 4" | 1/32" | Plug | Soldering | __ | WD1000M, WD2000M with WMRP | 0000000 | 00000 |
| __ | RT3 | Chisel | 850° | 4" | 1/16" | Plug | Soldering | __ | WD1000M, WD2000M with WMRP | 0000000 | 00000 |
| __ | RT4 | Chisel | 850° | 4" | 1/16" | Plug | Soldering | __ | WD1000M, WD2000M with WMRP | 0000000 | 00000 |
| __ | RT5 | 30° Chisel | 850° | 4" | 1/32" | Plug | Soldering | __ | WD1000M, WD2000M with WMRP | 0000000 | 00000 |
| __ | RT6 | Bevel | 850° | 4" | 3/64" | Plug | Soldering | __ | WD1000M, WD2000M with WMRP | 0000000 | 00000 |
| __ | RT7 | Knife | 850° | 4" | 3/32" | Plug | Plastic Cutting | __ | WD1000M, WD2000M with WMRP | 0000000 | 00000 |
RTM-MS Series | |||||||||||
| WMRP MS, WXMP MS | 10GWMS | Gullwing | 850° | 53/64" | 5/64" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | 11MS | Chisel | 850° | 3/4" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | 12MS | 25° Conical | 850° | 1 3/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | 13MS | 30° Conical | 850° | 1 3/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | 14MS | Conical | 850° | 4 21/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | 15MS | Conical | 850° | 4 25/64" | 1/32" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | 1NWMS | Conical | 850° | 25/32" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | 1SCMS | Chisel | 850° | 25/32" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | 3MS | Chisel | 850° | 25/32" | 3/64" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | 3XMS | 30° Chisel | 850° | 1 7/64" | 3/64" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | 9MS | Chisel | 850° | 61/64" | 1/32" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | KNMS | Knife | 850° | 4 13/32" | 17/32" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
| WMRP MS, WXMP MS | RT8MS | Chisel | 850° | 3/4" | 3/32" | Plug | Soldering | WR3M, WT2M, WX | __ | 00000000 | 00000 |
RTP-MS Series | |||||||||||
| WXPP MS | RTP 001 C MS | Conical | 850° | 45/64" | 0.003" | Plug | Soldering | WX | __ | 0000000 | 00000 |
| WXPP MS | RTP 004 C MS | Conical | 850° | 41/64" | 1/64" | Plug | Soldering | WX | __ | 0000000 | 00000 |
| WXPP MS | RTP 013 S MS | Chisel | 850° | 41/64" | 1/16" | Plug | Soldering | WX | __ | 0000000 | 00000 |
RTU-MS Series | |||||||||||
| WXUP MS | RTU 004 C MS | 30° Conical | 850° | 1 35/64" | 1/64" | Plug | Soldering | WX | __ | 0000000 | 00000 |
| WXUP MS | RTU 004 C MS | Conical | 850° | 1 7/64" | 1/64" | Plug | Soldering | WX | __ | 0000000 | 00000 |
| WXUP MS | RTU 008 C X MS | 30° Conical | 850° | 1 35/64" | 5/16" | Plug | Soldering | WX | __ | 0000000 | 00000 |
| WXUP MS | RTU 015 S MS | Chisel | 850° | 1 7/64" | 1/16" | Plug | Soldering | WX | __ | 0000000 | 00000 |
| WXUP MS | RTU 022 S MS | Chisel | 850° | 1 7/64" | 3/32" | Plug | Soldering | WX | __ | 0000000 | 00000 |
| WXUP MS | RTU 032 S MS | Chisel | 850° | 1 7/64" | 1/8" | Plug | Soldering | WX | __ | 0000000 | 00000 |
RTUS-MS Series | |||||||||||
| WXUPS MS | RTUS 004 C MS | Conical | 850° | 1 5/64" | 3/64" | Plug | Soldering | WXsmart | __ | 0000000 | 00000 |
| WXUPS MS | RTUS 008 C MS | Conical | 850° | 1 9/64" | 3/64" | Plug | Soldering | WXsmart | __ | 0000000 | 00000 |
| WXUPS MS | RTUS 016 C MS | Conical | 850° | 1 5/64" | 1/64" | Plug | Soldering | WXsmart | __ | 0000000 | 00000 |
| WXUPS MS | RTUS 076 S MS | Chisel | 850° | 1 3/32" | 1/64" | Plug | Soldering | WXsmart | __ | 0000000 | 00000 |
| WXUPS MS | RTUS 093 S MS | Chisel | 850° | 1 3/32" | 1/64" | Plug | Soldering | WXsmart | __ | 0000000 | 00000 |
XHT Series | |||||||||||
| WP200 | XHT C | Chisel | 850° | 1 7/8" | 1/8" | Plug | Soldering | WR2, WT1H, WT2M | __ | 0000000 | 00000 |
| WP200 | XHT D | Chisel | 850° | 1 7/8" | 13/64" | Plug | Soldering | WR2, WT1H, WT2M | __ | 0000000 | 00000 |
| WP200 | XHT E | Chisel | 850° | 1 7/8" | 19/64" | Plug | Soldering | WR2, WT1H, WT2M | __ | 0000000 | 00000 |
| WP200 | XHT F | Chisel | 850° | 1 7/8" | 3/8" | Plug | Soldering | WR2, WT1H, WT2M | __ | 0000000 | 00000 |
XNT Series | |||||||||||
| WP65, WTP90, WXP65 | 1LX | Round | 850° | 1 43/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP65, WTP90, WXP65 | 1SCNW | Chisel | 850° | 1 1/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP65, WTP90, WXP65 | 1X | Round | 850° | 1 7/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP65, WTP90, WXP65 | AX | Chisel | 850° | 1 7/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP65, WTP90, WXP65 | BX | Chisel | 850° | 1 7/16" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP65, WTP90, WXP65 | HX | 30° Chisel | 850° | 1 7/16" | 1/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP65, WTP90, WXP65 | L | Chisel | 850° | 1 15/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP65, WTP90, WXP65 | S | Conical | 850° | 1 15/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | __ | 00000000 | 00000 |
XT Series | |||||||||||
| WP120, WXP120 | AA 60 | Bevel | 850° | 1 29/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | BB 45 | Bevel | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | BS | Round | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | BSC | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | BSL | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | BX | 30° Chisel | 850° | 1 13/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | CC 45 | Bevel | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | CS | Round | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | CSL | Chisel | 850° | 1 27/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | D 45 | 45° Chisel | 850° | 1 29/64" | 1/4" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | DL | Chisel | 850° | 1 37/64" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | DS | Round | 850° | 1 3/8" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | F 30 | Bevel | 850° | 1 29/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | GW1 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | GW2 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | H | Chisel | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | HX | Chisel | 850° | 1 1/2" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | KN | Knife | 850° | 1 49/64" | 5/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
| WP120, WXP120 | MX | Chisel | 850° | 1 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | __ | 00000000 | 00000 |
Weller Nozzles for Irons
Weller DX
Weller R
Weller XDS
Point | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Iron Manufacturer Model Number | Manufacturer Model Number | Max. Temp., °F | Lg. | Wd. | ID | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
DX Series | ||||||||||
| DXV80 | DX 112 | 1000° | 63/64" | 3/32" | 3/64" | Plug | Desoldering | WR2, WR3M | 0000000 | 000000 |
| DXV80 | DX 113 | 1000° | 63/64" | 3/32" | 3/64" | Plug | Desoldering | WR2, WR3M | 0000000 | 00000 |
R Series | ||||||||||
| HAP200, WXHAP200 | R04 | 1000° | 41/64" | 3/64" | 1/32" | Plug | Hot Air | WR3M, WXA2, WXsmart | 0000000 | 00000 |
| HAP200, WXHAP200 | R06 | 1000° | 41/64" | 3/64" | 1/64" | Plug | Hot Air | WR3M, WXA2, WXsmart | 0000000 | 0000 |
XDS Series | ||||||||||
| WXDP120 | XDS 1 | 1000° | 13/32" | 1/8" | 1/16" | Plug | Desoldering | WXsmart | 0000000 | 00000 |
Weller Tips for Tweezers
45° Conical Tweezer
45° Chisel Tweezer
Chisel Tweezer
Screwdriver Tweezer
| Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | For Tweezer Manufacturer Model Number | Each | |
RTW-MS Series | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1MS | 45° Conical Tweezer | 850° | 55/64" | 1/64" | Plug | Desoldering | WX | WXMT MS | 00000000 | 000000 |
| 2MS | 45° Chisel Tweezer | 850° | 55/64" | 1/32" | Plug | Desoldering | WX | WXMT MS | 00000000 | 00000 |
RTWUS Series | ||||||||||
| RTWUS 015 B | Chisel Tweezer | 850° | 2" | 1/16" | Plug | Desoldering | WXsmart | WXUTS | 0000000 | 000000 |
| RTWUS 060 K | Screwdriver Tweezer | 850° | 2" | 15/64" | Plug | Desoldering | WXsmart | WXUTS | 0000000 | 000000 |
| RTWUS 200 K | Screwdriver Tweezer | 850° | 2" | 51/64" | Plug | Desoldering | WXsmart | WXUTS | 0000000 | 000000 |
Metcal Nozzles for Irons
Weller R
Point | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Iron Manufacturer Model Number | Manufacturer Model Number | Max. Temp., °F | Lg. | Wd. | ID | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
R Series | ||||||||||
| HAP200, WXHAP200 | R04 | 1000° | 41/64" | 3/64" | 1/32" | Plug | Hot Air | WR3M, WXA2, WXsmart | 0000000 | 000000 |
Single-Channel Soldering Stations
Compact and portable, these stations are best for repetitive soldering tasks that only require one tool. They give you complete control over the temperature, since you can adjust the temperature as you go. To protect sensitive components, they don’t create ESD (electrostatic discharge). Choose your station based on the wattage of the iron. Irons with lower wattages are best for work on parts that require precision and high heating efficiency, such as delicate electronic components. Irons with higher wattages are best for heavy parts and thick wires that require large solder joints.
Add different shaped and sized tips depending on the components you're soldering. The smaller the point width, the smaller the solder joint. For example, use a tip with a point width of 1/64” for soldering extra-small electronics under a microscope. For heavy duty soldering and large components, a tip with a point width of 1/8” works better.
Weller WE Series Stations
Screwdriver Tip
Display
Tip (Plug Connection) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Iron Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. | Duty Cycle | Approx. Heat-Up Time | Includes | Specifications Met | Each | |
WE1010NA | ||||||||||
120V AC | ||||||||||
| 70W | 200° to 850° | 85W | Screwdriver | 1/16" | Continuous | 28 sec. | One Tip One Soldering Iron One Sponge One Soldering Iron Stand | UL Listed | 0000000 | 0000000 |
Weller WT1 Series Stations
Chisel Tip
Display
Tip (Plug Connection) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Iron Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. | Duty Cycle | Approx. Heat-Up Time | Includes | Each | |
WT1010 | |||||||||
120V AC | |||||||||
| 90W | 150° to 850° | 95W | Chisel | 3/32" | Continuous | 10 sec. | One Tip One Soldering Iron One Sponge One Scouring Scrubber One Soldering Iron Stand | 00000000 | 0000000 |
WT1011 | |||||||||
120V AC | |||||||||
| 65W | 150° to 850° | 95W | Chisel | 1/16" | Continuous | 10 sec. | One Tip One Soldering Iron One Sponge One Scouring Scrubber One Soldering Iron Stand | 00000000 | 000000 |
WT1013 | |||||||||
120V AC | |||||||||
| 80W | 150° to 850° | 95W | Chisel | 3/32" | Continuous | 10 sec. | One Tip One Soldering Iron One Sponge One Scouring Scrubber One Soldering Iron Stand | 0000000 | 000000 |
Weller WT1H Series Stations
Chisel Tip
Display
Tip (Plug Connection) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Iron Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. | Duty Cycle | Approx. Heat-Up Time | Includes | Each | |
WT1010H | |||||||||
120V AC | |||||||||
| 120W | 150° to 950° | 150W | Chisel | 3/32" | Continuous | 60 sec. | One Tip One Iron One Sponge One Scouring Scrubber One Stand | 0000000 | 0000000 |
WT1011H | |||||||||
120V AC | |||||||||
| 200W | 150° to 950° | 150W | Chisel | 13/64" | Continuous | 60 sec. | One Tip One Iron One Sponge One Scouring Scrubber One Stand | 0000000 | 000000 |
Weller Soldering Irons
Screwdriver Tip
Chisel Tip
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Tip Shape | Point Wd. | Tip Connection Type | For Tip Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Includes | Each | |
| WE | WEP70 | 70W | 200° to 850° | Screwdriver | 1/16" | Plug | ET | Continuous | 28 sec. | Foam | 24V AC | One Tip | 0000000 | 000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WP65 | 65W | 150° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Plastic | 24V AC | One Tip | 00000000 | 000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WP80 | 80W | 150° to 850° | Chisel | 3/32" | Plug | LT | Continuous | 10 sec. | Rubber | 24V AC | One Tip | 00000000 | 000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WSP80 | 80W | 200° to 840° | Chisel | 1/16" | Plug | LT | Continuous | 45 sec. | Rubber | 24V AC | One Tip | 0000000 | 000000 |
| WR2, WR3M, WT1H, WT2M | WP120 | 120W | 150° to 845° | Chisel | 1/16" | Plug | XT | Continuous | 14 sec. | Rubber | 24V AC | One Tip | 0000000 | 000000 |
| WR2, WT1H, WT2M | WP200 | 200W | 360° to 850° | Chisel | 13/64" | Plug | XHT | Continuous | 45 sec. | Plastic | 24V AC | One Tip | 0000000 | 000000 |
| WR3M, WT1, WT1H, WT2M | WTP90 | 90W | 200° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Rubber | 24V AC | One Tip | 00000000 | 000000 |
Replacement Stands
For Iron | |||||
|---|---|---|---|---|---|
| Manufacturer Model Number | Wattage | Manufacturer Model Number | Includes | Each | |
| WEP70 | 70W | PH 70 | One Sponge | 00000000 | 000000 |
| WP65, WP80, WP120 | 65W, 80W, 120W | WDH 10T | One Scouring Scrubber | 0000000 | 000000 |
| WP65, WSP80, WXP65, WXP120 | 65W, 80W, 120W | WDH 10 | One Scouring Scrubber | 00000000 | 000000 |
| WP65, WSP80, WXP65, WXP120 | 65W, 80W, 120W | WSR 201 | One Sponge One Scouring Scrubber | 00000000 | 000000 |
| WP200 | 200W | WSR 202 | One Sponge One Scouring Scrubber | 0000000 | 000000 |
| WTP90 | 90W | WSR 200 | One Sponge One Scouring Scrubber | 00000000 | 000000 |
Weller ET Series Tips
Chisel
Round
Conical
Single Flat
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WEP70 | ETA | Chisel | 850° | 1 3/8" | 1/16" | Plug | Soldering | WE | 0000000 | 00000 |
| WEP70 | ETAA | Round | 850° | 1 3/8" | 1/16" | Plug | Soldering | WE | 00000000 | 0000 |
| WEP70 | ETB | Chisel | 850° | 1 3/8" | 3/32" | Plug | Soldering | WE | 0000000 | 0000 |
| WEP70 | ETC | Chisel | 850° | 1 3/8" | 1/8" | Plug | Soldering | WE | 0000000 | 0000 |
| WEP70 | ETD | Chisel | 850° | 1 3/8" | 3/16" | Plug | Soldering | WE | 00000000 | 0000 |
| WEP70 | ETH | Conical | 850° | 1 3/8" | 1/32" | Plug | Soldering | WE | 0000000 | 0000 |
| WEP70 | ETJ | Conical | 850° | 1 3/4" | 1/32" | Plug | Soldering | WE | 00000000 | 0000 |
| WEP70 | ETL | Chisel | 850° | 1 3/4" | 5/64" | Plug | Soldering | WE | 0000000 | 0000 |
| WEP70 | ETM | Chisel | 850° | 1 3/4" | 1/8" | Plug | Soldering | WE | 00000000 | 0000 |
| WEP70 | ETO | Conical | 850° | 1 3/4" | 1/32" | Plug | Soldering | WE | 0000000 | 0000 |
| WEP70 | ETP | Round | 850° | 1 3/8" | 1/32" | Plug | Soldering | WE | 0000000 | 0000 |
| WEP70 | ETR | Chisel | 850° | 1 3/8" | 1/16" | Plug | Soldering | WE | 0000000 | 0000 |
| WEP70 | ETS | Conical | 850° | 1 3/4" | 1/64" | Plug | Soldering | WE | 0000000 | 0000 |
| WEP70 | ETT | Conical | 850° | 1 3/8" | 1/64" | Plug | Soldering | WE | 0000000 | 0000 |
| WEP70 | ETU | Single Flat | 850° | 1 1/2" | 1/64" | Plug | Soldering | WE | 00000000 | 0000 |
| WEP70 | ETV | Single Flat | 850° | 1 1/2" | 1/32" | Plug | Soldering | WE | 00000000 | 0000 |
Weller LT Series Tips
Conical
Round
30° Round
Bevel
Gullwing
Knife
45° Knife
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP80, WSP80 | 1L | Conical | 850° | 1 1/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 1SA | Round | 850° | 19/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 1SLX | 30° Round | 850° | 55/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 22CP | Bevel | 850° | 25/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | 33CP | Bevel | 850° | 25/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 4 | Bevel | 850° | 19/32" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | BB | Bevel | 850° | 21/32" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | CC 60 | Bevel | 850° | 21/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | DD 45 | Bevel | 850° | 25/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | F | Bevel | 850° | 33/64" | 15/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | GW1 | Gullwing | 850° | 45/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | GW2 | Gullwing | 850° | 45/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | KN | Knife | 850° | 21/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | KNSL | 45° Knife | 850° | 21/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | LT1S | Round | 850° | 5/8" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTA | Chisel | 850° | 3/8" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTAS | Round | 850° | 3/8" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTB | Chisel | 850° | 1/2" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTC | Chisel | 850° | 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTCS | Round | 850° | 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTD | Chisel | 850° | 1/2" | 3/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTK | Chisel | 850° | 13/16" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTL | Chisel | 850° | 13/16" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTS | Conical | 850° | 13/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
Weller XHT Series Tips
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP200 | XHT C | Chisel | 850° | 1 7/8" | 1/8" | Plug | Soldering | WR2, WT1H, WT2M | 0000000 | 000000 |
| WP200 | XHT D | Chisel | 850° | 1 7/8" | 13/64" | Plug | Soldering | WR2, WT1H, WT2M | 0000000 | 00000 |
| WP200 | XHT E | Chisel | 850° | 1 7/8" | 19/64" | Plug | Soldering | WR2, WT1H, WT2M | 0000000 | 00000 |
| WP200 | XHT F | Chisel | 850° | 1 7/8" | 3/8" | Plug | Soldering | WR2, WT1H, WT2M | 0000000 | 00000 |
Weller XNT Series Tips
Round
Chisel
Conical
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP65, WTP90, WXP65 | 1LX | Round | 850° | 1 43/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 000000 |
| WP65, WTP90, WXP65 | 1SCNW | Chisel | 850° | 1 1/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | 1X | Round | 850° | 1 7/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | AX | Chisel | 850° | 1 7/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | BX | Chisel | 850° | 1 7/16" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | HX | 30° Chisel | 850° | 1 7/16" | 1/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | L | Chisel | 850° | 1 15/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | S | Conical | 850° | 1 15/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
Weller XT Series Tips
Bevel
Round
Chisel
Gullwing
Knife
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP120, WXP120 | AA 60 | Bevel | 850° | 1 29/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 000000 |
| WP120, WXP120 | BB 45 | Bevel | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BS | Round | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BSC | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BSL | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BX | 30° Chisel | 850° | 1 13/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CC 45 | Bevel | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CS | Round | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CSL | Chisel | 850° | 1 27/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | D 45 | 45° Chisel | 850° | 1 29/64" | 1/4" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | DL | Chisel | 850° | 1 37/64" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | DS | Round | 850° | 1 3/8" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | F 30 | Bevel | 850° | 1 29/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | GW1 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | GW2 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | H | Chisel | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | HX | Chisel | 850° | 1 1/2" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | KN | Knife | 850° | 1 49/64" | 5/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | MX | Chisel | 850° | 1 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
Multichannel Soldering and Desoldering Stations
Switch between different soldering and desoldering tools quickly—these stations have either two or three channels to plug in multiple tools so they're ready to go. You can adjust the temperature for the best results. To protect sensitive components, they don’t create ESD (electrostatic discharge). Additional tips and nozzles are sold separately.
Choose a station that’s compatible with your soldering or desoldering iron. Each station includes a variety of tools to solder, desolder, or both—determine if the included tools work for your application.
Add different shaped and sized tips depending on the components you're soldering. The smaller the point width, the smaller the solder joint. For example, use a tip with a point width of 1/64” for soldering extra-small electronics under a microscope. For heavy duty soldering and large components, a tip with a point width of 1/8” works better.
Weller WR2 Series Stations
Chisel Tip
Display
Weller WR2 stations have a USB connection, so you can connect them to your computer to adjust standby temperature, automatic shut-off timing, and other settings. This also gives you a way to log soldering temperatures and update station firmware. The included iron keeps its settings even if you use it with a different station. WR2000VX stations have a built-in vacuum for desoldering and a built-in air pump for hot air applications.
Desoldering irons heat and suction off solder for precise removal. To prevent solder clogs, they have an in-line collection chamber.
Tip/Nozzle (Plug Connection) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Channels | Station Type | Iron Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. (Point ID) | Duty Cycle | Approx. Heat-Up Time | Includes | Each | |
WR2000VX | |||||||||||
120V AC | |||||||||||
| 2 | Soldering Desoldering | 80W 80W | 150° to 990° | 250W | Chisel __ | 3/32" 3/32" (3/64") | Continuous | 60 sec. | One Tip One Nozzle One Soldering Iron One Desoldering Iron Two Sponges Two Scouring Scrubbers One Soldering Iron Stand One Desoldering Iron Stand | 0000000 | 000000000 |
Weller WR3M Series Stations
Chisel Tip
Display
Weller WR3M stations have a USB connection, so you can connect them to your computer to adjust standby temperature, automatic shut-off timing, and other settings. This also gives you a way to log soldering temperatures and update station firmware. The included iron keeps its settings even if you use it with a different station. WR3000M stations have a built-in vacuum for desoldering and a built-in air pump for hot air applications.
Desoldering irons heat and suction off solder for precise removal. To prevent solder clogs, they have an in-line collection chamber. Hot air irons are good for delicately heating soldered electronic parts for removal.
Tip/Nozzle (Plug Connection) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Channels | Station Type | Iron Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. (Point ID) | Duty Cycle | Approx. Heat-Up Time | Includes | Each | |
WR3000M | |||||||||||
120V AC | |||||||||||
| 3 | Soldering Desoldering Hot Air | 80W 80W 200W | 200° to 850° | 360W | Chisel __ __ | 3/32" 7/64" (5/64"), 3/64" (3/32") 3/64" (1/64"), 1/8" (1/32") | Continuous | 60 sec. | Vacuum Pick-Up Tool One Tip Four Nozzles One Soldering Iron One Desoldering Iron One Hot Air Iron Three Sponges Three Scouring Scrubbers One Soldering Iron Stand One Desoldering Iron Stand One Hot Air Iron Stand | 0000000 | 000000000 |
Weller WT2M Series Stations
Soldering
Soldering, Desoldering
Chisel Tip
Display
Chisel Tweezer Tip
Desoldering tweezers are better than irons for fine work that requires a lot of power, such as soldering and desoldering surface-mount devices.
Tip (Plug Connection) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Channels | Station Type | Iron Wattage | Tweezer Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. | Duty Cycle | Approx. Heat-Up Time | Includes | Each | |
WT2010M | ||||||||||||
120V AC | ||||||||||||
| 2 | Soldering | 90W | __ | 150° to 850° | 150W | Chisel | 1/16" | Continuous | 60 sec. | One Tip One Soldering Iron One Sponge One Scouring Scrubber One Soldering Iron Stand | 0000000 | 0000000 |
WT2021M | ||||||||||||
120V AC | ||||||||||||
| 2 | Soldering Desoldering | 40W __ | __ 40W | 150° to 850° | 150W | Chisel Chisel Tweezer | 1/32" 3/64" | Continuous | 60 sec. | Two Tips One Soldering Iron Two Sponges Two Scouring Scrubbers One Desoldering Tweezer One Desoldering Tweezer Stand One Soldering Iron Stand | 0000000 | 00000000 |
Weller WX Series Stations
Soldering
Soldering, Desoldering
Round Tip
Hot Air
Chisel Tip
Display
Chisel Tweezer Tip
Weller WX stations have a USB connection, so you can connect them to your computer to adjust standby temperature, automatic shut-off timing, and other settings. This also gives you a way to log soldering temperatures and update station firmware. The included iron keeps its settings even if you use it with a different station.
WXA2010 stations require an external compressed air source.
Desoldering tweezers are better than irons for fine work that requires a lot of power, such as soldering and desoldering surface-mount devices. Hot air irons are good for delicately heating soldered electronic parts for removal.
Tip/Nozzle (Plug Connection) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Channels | Station Type | Iron Wattage | Tweezer Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. (Point ID) | Duty Cycle | Approx. Heat-Up Time | Includes | Each | |
WX2020 | ||||||||||||
120V AC | ||||||||||||
| 2 | Soldering | 120W | __ | 210° to 990° | 200W | Chisel | 3/32" | Continuous | 10 sec. | Two Tips Two Soldering Irons Two Scouring Scrubbers Two Soldering Iron Stands | 00000000 | 000000000 |
WX2021 | ||||||||||||
120V AC | ||||||||||||
| 2 | Soldering Desoldering | 40W __ | __ 40W | 210° to 990° | 200W | Chisel Chisel Tweezer | 1/32" 3/64" | Continuous | 10 sec. | Two Tips One Soldering Iron Two Scouring Scrubbers One Desoldering Tweezer Two Soldering Iron Stands | 00000000 | 00000000 |
WX2022 | ||||||||||||
120V AC | ||||||||||||
| 2 | Soldering | 40W | __ | 210° to 990° | 200W | Chisel | 1/64" | Continuous | 3 sec. | Precision Tweezers One Tip One Soldering Iron One Sponge One Scouring Scrubber One Soldering Iron Stand | 0000000 | 000000 |
WX2023 | ||||||||||||
120V AC | ||||||||||||
| 2 | Soldering | 40W | __ | 210° to 990° | 200W | Round | 3/64" | Continuous | 3 sec. | One Tip One Soldering Iron One Sponge One Scouring Scrubber One Soldering Iron Stand | 0000000 | 000000 |
WX2024 | ||||||||||||
120V AC | ||||||||||||
| 2 | Soldering | 150W | __ | 210° to 990° | 200W | Chisel | 1/8" | Continuous | 7 sec. | One Tip One Soldering Iron One Sponge One Scouring Scrubber One Soldering Iron Stand | 0000000 | 000000 |
WXA2010 | ||||||||||||
120V AC | ||||||||||||
| 2 | Hot Air | 200W | __ | 200° to 990° | 200W | __ | 1/8" (1/32") | Continuous | 60 sec. | One Nozzle One Hot Air Iron One Sponge One Scouring Scrubber One Hot Air Iron Stand | 0000000 | 00000000 |
Weller WXsmart Series Stations
Soldering
Soldering, Desoldering
Chisel Tip
Display
Weller WXsmart stations are Internet of Things (IoT) enabled, so you can control and track your process from the WXSmart app on a smartphone, tablet, or computer. Use either WiFi or a USB cable to connect your device. From the app, you can monitor your process in real time or adjust settings, such as the temperature of the tool and automatic shut-off timing. Each time you solder a joint, these stations log the date and the time spent as well as the operating temperature and model number of the tool. This makes them good for quality control in manufacturing processes, where it’s important to document and repeat what you’ve done. WXS2020 stations come with a module you can attach to turn them into all-in-one soldering, desoldering, and hot air stations. The module has two channels as well as a built-in vacuum and built-in air pump.
Desoldering irons heat and suction off solder for precise removal. To prevent solder clogs, they have an in-line collection chamber.
Tip/Nozzle (Plug Connection) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Channels | Station Type | Iron Wattage | Temp. Range, °F | Wattage | Shape | Point Wd. (Point ID) | Duty Cycle | Approx. Heat-Up Time | Includes | Each | |
WXS2012 | |||||||||||
120V AC | |||||||||||
| 2 | Soldering | 150W | 200° to 850° | 300W | Chisel | 1/8" | Continuous | 7 sec. | One Tip One Soldering Iron One Sponge One Scouring Scrubber One Soldering Iron Stand Tip Holder | 0000000 | 000000000 |
WXS2020 | |||||||||||
120V AC | |||||||||||
| 2 | Soldering Desoldering | 150W 120W | 200° to 850° | 300W | Chisel __ | 1/8" 3/32" (3/64"), 7/64" (1/16") | Continuous | 7 sec. | One Tip Two Nozzles One Soldering Iron One Desoldering Iron Two Sponges Two Scouring Scrubbers One Soldering Iron Stand One Desoldering Iron Stand One WXair Module Tip Holder | 0000000 | 00000000 |
Weller Soldering Irons
Chisel Tip
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Tip Shape | Point Wd. | Tip Connection Type | For Tip Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Includes | Each | |
| WR2, WR3M, WT1, WT1H, WT2M | WP65 | 65W | 150° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Plastic | 24V AC | One Tip | 00000000 | 0000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WP80 | 80W | 150° to 850° | Chisel | 3/32" | Plug | LT | Continuous | 10 sec. | Rubber | 24V AC | One Tip | 00000000 | 000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WSP80 | 80W | 200° to 840° | Chisel | 1/16" | Plug | LT | Continuous | 45 sec. | Rubber | 24V AC | One Tip | 0000000 | 000000 |
| WR2, WR3M, WT1H, WT2M | WP120 | 120W | 150° to 845° | Chisel | 1/16" | Plug | XT | Continuous | 14 sec. | Rubber | 24V AC | One Tip | 0000000 | 000000 |
| WR2, WT1H, WT2M | WP200 | 200W | 360° to 850° | Chisel | 13/64" | Plug | XHT | Continuous | 45 sec. | Plastic | 24V AC | One Tip | 0000000 | 000000 |
| WR3M, WT1, WT1H, WT2M | WTP90 | 90W | 200° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Rubber | 24V AC | One Tip | 00000000 | 000000 |
| WR3M, WT2M | WMRP MS | 40W | 200° to 850° | Chisel | 3/64" | Plug | RTM-MS | Continuous | 3 sec. | Rubber | 12V AC | One Tip | 0000000 | 000000 |
| WX | WXMP MS | 40W | 200° to 850° | __ | __ | Plug | RTM-MS | Continuous | 10 sec. | Rubber | 12V AC | __ | 00000000 | 000000 |
| WX | WXP120 | 120W | 200° to 850° | Chisel | 3/32" | Plug | XT | Continuous | 20 sec. | Rubber | 24V AC | One Tip | 00000000 | 000000 |
| WX | WXP65 | 65W | 200° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Rubber | 24V AC | One Tip | 00000000 | 000000 |
| WX | WXPP MS | 40W | 200° to 850° | __ | __ | Plug | RTP-MS | Continuous | 3 sec. | Rubber | 12V AC | __ | 0000000 | 000000 |
| WX | WXUP MS | 150W | 360° to 850° | __ | __ | Plug | RTU-MS | Continuous | 7 sec. | Rubber | 24V AC | __ | 0000000 | 000000 |
| WXsmart | WXUPS MS | 150W | 200° to 850° | __ | __ | Plug | RTUS-MS | Continuous | 7 sec. | Rubber | 24V AC | __ | 0000000 | 000000 |
Weller Desoldering Irons
WXDP 120
Point | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Wd. | ID | Nozzle Connection Type | For Nozzle Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Includes | Each | |
| WR2, WR3M | DXV 80 | 80W | 150° to 850° | 1/8" | 5/64" | Plug | DX | Continuous | 65 sec. | Rubber | 24V AC | One Nozzle | 0000000 | 0000000 |
| WXsmart | WXDP 120 | 120W | 200° to 840° | 3/32" | 1/16" | Plug | XDS | Continuous | 35 sec. | Rubber | 24V AC | One Nozzle | 0000000 | 000000 |
Weller Hot Air Irons
Point | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Airflow, cfm | Wd. | ID | For Nozzle Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Includes | Each | |
| WR3M | HAP200 | 200W | 200° to 990° | 0.5 | 3/64" | 1/64" | R | Continuous | 45 sec. | Plastic | 24V AC | One Nozzle | 0000000 | 0000000 |
| WXA2, WXsmart | WXHAP200 | 200W | 200° to 990° | 0.7 | 3/64" | 1/32" | R | Continuous | 45 sec. | Plastic | 24V AC | One Nozzle | 0000000 | 000000 |
Weller Desoldering Tweezers
| For Station Manufacturer Series | Wattage | Temp. Range, °F | Tip Connection Type | Manufacturer Model Number | For Tip Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Voltage | Each | |
| WX | 80W | 200° to 850° | Plug | WXMT MS | RTW-MS | Continuous | 10 sec. | 12V AC | 00000000 | 0000000 |
| WXsmart | 150W | 200° to 850° | Plug | WXUTS | RTWUS | Continuous | 10 sec. | 24V AC | 0000000 | 000000 |
Replacement Stands
For Iron | For Tweezer | ||||||
|---|---|---|---|---|---|---|---|
| Manufacturer Model Number | For Iron Wattage | Manufacturer Model Number | Wattage | Manufacturer Model Number | Includes | Each | |
| __ | __ | WXMT MS | 40W | WSR 210 | One Sponge One Scouring Scrubber | 0000000 | 0000000 |
| __ | __ | WXMT MS | 40W | WDH 60 | One Scouring Scrubber | 00000000 | 000000 |
| DXV80 | 200W | __ | __ | WDH 40 | One Scouring Scrubber | 0000000 | 000000 |
| HAP200 | 200W | __ | __ | WDH 30 | One Scouring Scrubber | 0000000 | 000000 |
| WMRP MS | 40W | __ | __ | WSR 205 | One Sponge One Scouring Scrubber | 0000000 | 000000 |
| WP65, WP80, WP120 | 65W, 80W, 120W | __ | __ | WDH 10T | One Scouring Scrubber | 0000000 | 000000 |
| WP65, WSP80, WXP65, WXP120 | 65W, 80W, 120W | __ | __ | WDH 10 | One Scouring Scrubber | 00000000 | 000000 |
| WP65, WSP80, WXP65, WXP120 | 65W, 80W, 120W | __ | __ | WSR 201 | One Sponge One Scouring Scrubber | 00000000 | 000000 |
| WP200 | 200W | __ | __ | WSR 202 | One Sponge One Scouring Scrubber | 0000000 | 000000 |
| WTP90 | 90W | __ | __ | WSR 200 | One Sponge One Scouring Scrubber | 00000000 | 000000 |
| WXDP120 | 200W | __ | __ | WDH 70 | One Scouring Scrubber | 0000000 | 000000 |
| WXMP MS | 40W | __ | __ | WDH 51 | One Scouring Scrubber | 00000000 | 00000 |
| WXPP MS | 40W | __ | __ | WSR 208 | One Sponge One Scouring Scrubber | 0000000 | 000000 |
Weller LT Series Tips
Conical
Round
30° Round
Bevel
Gullwing
Knife
45° Knife
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP80, WSP80 | 1L | Conical | 850° | 1 1/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 1SA | Round | 850° | 19/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 1SLX | 30° Round | 850° | 55/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 22CP | Bevel | 850° | 25/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | 33CP | Bevel | 850° | 25/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 4 | Bevel | 850° | 19/32" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | BB | Bevel | 850° | 21/32" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | CC 60 | Bevel | 850° | 21/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | DD 45 | Bevel | 850° | 25/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | F | Bevel | 850° | 33/64" | 15/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | GW1 | Gullwing | 850° | 45/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | GW2 | Gullwing | 850° | 45/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | KN | Knife | 850° | 21/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | KNSL | 45° Knife | 850° | 21/32" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | LT1S | Round | 850° | 5/8" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTA | Chisel | 850° | 3/8" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTAS | Round | 850° | 3/8" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTB | Chisel | 850° | 1/2" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTC | Chisel | 850° | 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTCS | Round | 850° | 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTD | Chisel | 850° | 1/2" | 3/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTK | Chisel | 850° | 13/16" | 3/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTL | Chisel | 850° | 13/16" | 5/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTS | Conical | 850° | 13/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
Weller RTM-MS Series Tips
Gullwing
Chisel
25° Conical
30° Conical
Conical
30° Chisel
Knife
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WMRP MS, WXMP MS | 10GWMS | Gullwing | 850° | 53/64" | 5/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 000000 |
| WMRP MS, WXMP MS | 11MS | Chisel | 850° | 3/4" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 12MS | 25° Conical | 850° | 1 3/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 13MS | 30° Conical | 850° | 1 3/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 14MS | Conical | 850° | 4 21/64" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 15MS | Conical | 850° | 4 25/64" | 1/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 1NWMS | Conical | 850° | 25/32" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 1SCMS | Chisel | 850° | 25/32" | 1/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 3MS | Chisel | 850° | 25/32" | 3/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 3XMS | 30° Chisel | 850° | 1 7/64" | 3/64" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 9MS | Chisel | 850° | 61/64" | 1/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | KNMS | Knife | 850° | 4 13/32" | 17/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | RT8MS | Chisel | 850° | 3/4" | 3/32" | Plug | Soldering | WR3M, WT2M, WX | 00000000 | 00000 |
Weller RTP-MS Series Tips
Conical
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WXPP MS | RTP 001 C MS | Conical | 850° | 45/64" | 0.003" | Plug | Soldering | WX | 0000000 | 000000 |
| WXPP MS | RTP 004 C MS | Conical | 850° | 41/64" | 1/64" | Plug | Soldering | WX | 0000000 | 00000 |
| WXPP MS | RTP 013 S MS | Chisel | 850° | 41/64" | 1/16" | Plug | Soldering | WX | 0000000 | 00000 |
Weller RTU-MS Series Tips
Conical
30° Conical
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WXUP MS | RTU 004 C MS | Conical | 850° | 1 7/64" | 1/64" | Plug | Soldering | WX | 0000000 | 000000 |
| WXUP MS | RTU 004 C MS | 30° Conical | 850° | 1 35/64" | 1/64" | Plug | Soldering | WX | 0000000 | 00000 |
| WXUP MS | RTU 008 C X MS | 30° Conical | 850° | 1 35/64" | 5/16" | Plug | Soldering | WX | 0000000 | 00000 |
| WXUP MS | RTU 015 S MS | Chisel | 850° | 1 7/64" | 1/16" | Plug | Soldering | WX | 0000000 | 00000 |
| WXUP MS | RTU 022 S MS | Chisel | 850° | 1 7/64" | 3/32" | Plug | Soldering | WX | 0000000 | 00000 |
| WXUP MS | RTU 032 S MS | Chisel | 850° | 1 7/64" | 1/8" | Plug | Soldering | WX | 0000000 | 00000 |
Weller RTUS-MS Series Tips
Conical
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WXUPS MS | RTUS 004 C MS | Conical | 850° | 1 5/64" | 3/64" | Plug | Soldering | WXsmart | 0000000 | 000000 |
| WXUPS MS | RTUS 008 C MS | Conical | 850° | 1 9/64" | 3/64" | Plug | Soldering | WXsmart | 0000000 | 00000 |
| WXUPS MS | RTUS 016 C MS | Conical | 850° | 1 5/64" | 1/64" | Plug | Soldering | WXsmart | 0000000 | 00000 |
| WXUPS MS | RTUS 076 S MS | Chisel | 850° | 1 3/32" | 1/64" | Plug | Soldering | WXsmart | 0000000 | 00000 |
| WXUPS MS | RTUS 093 S MS | Chisel | 850° | 1 3/32" | 1/64" | Plug | Soldering | WXsmart | 0000000 | 00000 |
Weller XHT Series Tips
Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP200 | XHT C | Chisel | 850° | 1 7/8" | 1/8" | Plug | Soldering | WR2, WT1H, WT2M | 0000000 | 000000 |
| WP200 | XHT D | Chisel | 850° | 1 7/8" | 13/64" | Plug | Soldering | WR2, WT1H, WT2M | 0000000 | 00000 |
| WP200 | XHT E | Chisel | 850° | 1 7/8" | 19/64" | Plug | Soldering | WR2, WT1H, WT2M | 0000000 | 00000 |
| WP200 | XHT F | Chisel | 850° | 1 7/8" | 3/8" | Plug | Soldering | WR2, WT1H, WT2M | 0000000 | 00000 |
Weller XNT Series Tips
Round
Chisel
30° Chisel
Conical
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP65, WTP90, WXP65 | 1LX | Round | 850° | 1 43/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 000000 |
| WP65, WTP90, WXP65 | 1SCNW | Chisel | 850° | 1 1/16" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | 1X | Round | 850° | 1 7/64" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | AX | Chisel | 850° | 1 7/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | BX | Chisel | 850° | 1 7/16" | 3/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | HX | 30° Chisel | 850° | 1 7/16" | 1/32" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | L | Chisel | 850° | 1 15/32" | 1/8" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | S | Conical | 850° | 1 15/32" | 1/64" | Plug | Soldering | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
Weller XT Series Tips
Bevel
Round
Chisel
30° Chisel
45° Chisel
Gullwing
Knife
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WP120, WXP120 | AA 60 | Bevel | 850° | 1 29/64" | 1/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 000000 |
| WP120, WXP120 | BB 45 | Bevel | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BS | Round | 850° | 1 29/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BSC | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BSL | Chisel | 850° | 1 27/64" | 3/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BX | 30° Chisel | 850° | 1 13/32" | 5/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CC 45 | Bevel | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CS | Round | 850° | 1 29/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CSL | Chisel | 850° | 1 27/64" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | D 45 | 45° Chisel | 850° | 1 29/64" | 1/4" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | DL | Chisel | 850° | 1 37/64" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | DS | Round | 850° | 1 3/8" | 3/16" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | F 30 | Bevel | 850° | 1 29/64" | 3/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | GW1 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | GW2 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | H | Chisel | 850° | 1 29/64" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | HX | Chisel | 850° | 1 1/2" | 1/32" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | KN | Knife | 850° | 1 49/64" | 5/64" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | MX | Chisel | 850° | 1 1/2" | 1/8" | Plug | Soldering | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
Weller RTWUS Series Tweezer Tips
Chisel Tweezer
Screwdriver Tweezer
| Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | For Tweezer Manufacturer Model Number | Each | |
| RTWUS 015 B | Chisel Tweezer | 850° | 2" | 1/16" | Plug | Desoldering | WXsmart | WXUTS | 0000000 | 0000000 |
| RTWUS 060 K | Screwdriver Tweezer | 850° | 2" | 15/64" | Plug | Desoldering | WXsmart | WXUTS | 0000000 | 000000 |
| RTWUS 200 K | Screwdriver Tweezer | 850° | 2" | 51/64" | Plug | Desoldering | WXsmart | WXUTS | 0000000 | 000000 |
Weller RTW-MS Series Tweezer Tips
45° Conical Tweezer
45° Chisel Tweezer
| Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Type | For Station Manufacturer Series | For Tweezer Manufacturer Model Number | Each | |
| 1MS | 45° Conical Tweezer | 850° | 55/64" | 1/64" | Plug | Desoldering | WX | WXMT MS | 00000000 | 000000 |
| 2MS | 45° Chisel Tweezer | 850° | 55/64" | 1/32" | Plug | Desoldering | WX | WXMT MS | 00000000 | 00000 |
Weller DX Series Nozzles
Weller R Series Nozzles
Weller R
Point | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Iron Manufacturer Model Number | Manufacturer Model Number | Max. Temp., °F | Lg. | Wd. | ID | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| HAP200, WXHAP200 | R04 | 1000° | 41/64" | 3/64" | 1/32" | Plug | Hot Air | WR3M, WXA2, WXsmart | 0000000 | 000000 |
| HAP200, WXHAP200 | R06 | 1000° | 41/64" | 3/64" | 1/64" | Plug | Hot Air | WR3M, WXA2, WXsmart | 0000000 | 0000 |
Weller XDS Series Nozzles
Weller XDS
Point | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Iron Manufacturer Model Number | Manufacturer Model Number | Max. Temp., °F | Lg. | Wd. | ID | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WXDP120 | XDS 1 | 1000° | 13/32" | 1/8" | 1/16" | Plug | Desoldering | WXsmart | 0000000 | 000000 |
Soldering Irons for Soldering and Desoldering Stations
Replace your station's soldering iron or swap it out for a different wattage. The lower the wattage, the more control you have for parts that require precise soldering, such as delicate electronics. The higher the wattage, the thicker the wire it will solder, making these irons best for heavy components. All irons have a temperature control button, so you can adjust the tip temperature to suit your application.
Weller Irons
Screwdriver Tip
Chisel Tip
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Tip Shape | Point Wd. | Tip Connection Type | For Tip Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Cord Lg., ft. | Includes | Each | |
| WE | WEP70 | 70W | 200° to 850° | Screwdriver | 1/16" | Plug | ET | Continuous | 28 sec. | Foam | 24V AC | 4 | One Tip | 0000000 | 000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WP65 | 65W | 150° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Plastic | 24V AC | 4 | One Tip | 00000000 | 000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WP80 | 80W | 150° to 850° | Chisel | 3/32" | Plug | LT | Continuous | 10 sec. | Rubber | 24V AC | 4 | One Tip | 00000000 | 000000 |
| WR2, WR3M, WT1, WT1H, WT2M | WSP80 | 80W | 200° to 840° | Chisel | 1/16" | Plug | LT | Continuous | 45 sec. | Rubber | 24V AC | 4 | One Tip | 0000000 | 000000 |
| WR2, WR3M, WT1H, WT2M | WP120 | 120W | 150° to 845° | Chisel | 1/16" | Plug | XT | Continuous | 14 sec. | Rubber | 24V AC | 4 | One Tip | 0000000 | 000000 |
| WR2, WT1H, WT2M | WP200 | 200W | 360° to 850° | Chisel | 13/64" | Plug | XHT | Continuous | 45 sec. | Plastic | 24V AC | 4 | One Tip | 0000000 | 000000 |
| WR3M, WT1, WT1H, WT2M | WTP90 | 90W | 200° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Rubber | 24V AC | 4 | One Tip | 00000000 | 000000 |
| WR3M, WT2M | WMRP MS | 40W | 200° to 850° | Chisel | 3/64" | Plug | RTM-MS | Continuous | 3 sec. | Rubber | 12V AC | 4 | One Tip | 0000000 | 000000 |
| WX | WXMP MS | 40W | 200° to 850° | __ | __ | Plug | RTM-MS | Continuous | 10 sec. | Rubber | 12V AC | 4 | __ | 00000000 | 000000 |
| WX | WXP120 | 120W | 200° to 850° | Chisel | 3/32" | Plug | XT | Continuous | 20 sec. | Rubber | 24V AC | 4 | One Tip | 00000000 | 000000 |
| WX | WXP65 | 65W | 200° to 850° | Chisel | 1/16" | Plug | XNT | Continuous | 10 sec. | Rubber | 24V AC | 4 | One Tip | 00000000 | 000000 |
| WX | WXPP MS | 40W | 200° to 850° | __ | __ | Plug | RTP-MS | Continuous | 3 sec. | Rubber | 12V AC | 4 | __ | 0000000 | 000000 |
| WX | WXUP MS | 150W | 360° to 850° | __ | __ | Plug | RTU-MS | Continuous | 7 sec. | Rubber | 24V AC | 4 | __ | 0000000 | 000000 |
| WXsmart | WXUPS MS | 150W | 200° to 850° | __ | __ | Plug | RTUS-MS | Continuous | 7 sec. | Rubber | 24V AC | 4 | __ | 0000000 | 000000 |
Weller Tips for Irons
Chisel
Round
Conical
Single Flat
30° Round
Bevel
Gullwing
Knife
45° Knife
25° Conical
30° Conical
30° Chisel
45° Chisel
| For Iron Manufacturer Model Number | Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | For Station Manufacturer Series | Each | |
ET Series | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| WEP70 | ETA | Chisel | 850° | 1 3/8" | 1/16" | Plug | WE | 0000000 | 00000 |
| WEP70 | ETAA | Round | 850° | 1 3/8" | 1/16" | Plug | WE | 00000000 | 0000 |
| WEP70 | ETB | Chisel | 850° | 1 3/8" | 3/32" | Plug | WE | 0000000 | 0000 |
| WEP70 | ETC | Chisel | 850° | 1 3/8" | 1/8" | Plug | WE | 0000000 | 0000 |
| WEP70 | ETD | Chisel | 850° | 1 3/8" | 3/16" | Plug | WE | 00000000 | 0000 |
| WEP70 | ETH | Conical | 850° | 1 3/8" | 1/32" | Plug | WE | 0000000 | 0000 |
| WEP70 | ETJ | Conical | 850° | 1 3/4" | 1/32" | Plug | WE | 00000000 | 0000 |
| WEP70 | ETL | Chisel | 850° | 1 3/4" | 5/64" | Plug | WE | 0000000 | 0000 |
| WEP70 | ETM | Chisel | 850° | 1 3/4" | 1/8" | Plug | WE | 00000000 | 0000 |
| WEP70 | ETO | Conical | 850° | 1 3/4" | 1/32" | Plug | WE | 0000000 | 0000 |
| WEP70 | ETP | Round | 850° | 1 3/8" | 1/32" | Plug | WE | 0000000 | 0000 |
| WEP70 | ETR | Chisel | 850° | 1 3/8" | 1/16" | Plug | WE | 0000000 | 0000 |
| WEP70 | ETS | Conical | 850° | 1 3/4" | 1/64" | Plug | WE | 0000000 | 0000 |
| WEP70 | ETT | Conical | 850° | 1 3/8" | 1/64" | Plug | WE | 0000000 | 0000 |
| WEP70 | ETU | Single Flat | 850° | 1 1/2" | 1/64" | Plug | WE | 00000000 | 0000 |
| WEP70 | ETV | Single Flat | 850° | 1 1/2" | 1/32" | Plug | WE | 00000000 | 0000 |
LT Series | |||||||||
| WP80, WSP80 | 1L | Conical | 850° | 1 1/32" | 1/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | 1SA | Round | 850° | 19/32" | 1/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 1SLX | 30° Round | 850° | 55/64" | 1/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 22CP | Bevel | 850° | 25/32" | 5/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | 33CP | Bevel | 850° | 25/32" | 1/8" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | 4 | Bevel | 850° | 19/32" | 3/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | BB | Bevel | 850° | 21/32" | 3/32" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | CC 60 | Bevel | 850° | 21/32" | 1/8" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | DD 45 | Bevel | 850° | 25/32" | 5/32" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | F | Bevel | 850° | 33/64" | 15/32" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | GW1 | Gullwing | 850° | 45/64" | 3/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | GW2 | Gullwing | 850° | 45/64" | 1/8" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | KN | Knife | 850° | 21/32" | 5/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | KNSL | 45° Knife | 850° | 21/32" | 5/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 00000 |
| WP80, WSP80 | LT1S | Round | 850° | 5/8" | 1/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTA | Chisel | 850° | 3/8" | 1/16" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTAS | Round | 850° | 3/8" | 1/16" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTB | Chisel | 850° | 1/2" | 3/32" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTC | Chisel | 850° | 1/2" | 1/8" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTCS | Round | 850° | 1/2" | 1/8" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 0000000 | 0000 |
| WP80, WSP80 | LTD | Chisel | 850° | 1/2" | 3/16" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTK | Chisel | 850° | 13/16" | 3/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTL | Chisel | 850° | 13/16" | 5/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
| WP80, WSP80 | LTS | Conical | 850° | 13/16" | 1/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M | 00000000 | 0000 |
RTM-MS Series | |||||||||
| WMRP MS, WXMP MS | 10GWMS | Gullwing | 850° | 53/64" | 5/64" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 11MS | Chisel | 850° | 3/4" | 1/64" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 12MS | 25° Conical | 850° | 1 3/64" | 1/64" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 13MS | 30° Conical | 850° | 1 3/64" | 1/64" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 14MS | Conical | 850° | 4 21/64" | 1/64" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 15MS | Conical | 850° | 4 25/64" | 1/32" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 1NWMS | Conical | 850° | 25/32" | 1/64" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 1SCMS | Chisel | 850° | 25/32" | 1/64" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 3MS | Chisel | 850° | 25/32" | 3/64" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 3XMS | 30° Chisel | 850° | 1 7/64" | 3/64" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | 9MS | Chisel | 850° | 61/64" | 1/32" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | KNMS | Knife | 850° | 4 13/32" | 17/32" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
| WMRP MS, WXMP MS | RT8MS | Chisel | 850° | 3/4" | 3/32" | Plug | WR3M, WT2M, WX | 00000000 | 00000 |
RTP-MS Series | |||||||||
| WXPP MS | RTP 001 C MS | Conical | 850° | 45/64" | 0.003" | Plug | WX | 0000000 | 00000 |
| WXPP MS | RTP 004 C MS | Conical | 850° | 41/64" | 1/64" | Plug | WX | 0000000 | 00000 |
| WXPP MS | RTP 013 S MS | Chisel | 850° | 41/64" | 1/16" | Plug | WX | 0000000 | 00000 |
RTU-MS Series | |||||||||
| WXUP MS | RTU 004 C MS | 30° Conical | 850° | 1 35/64" | 1/64" | Plug | WX | 0000000 | 00000 |
| WXUP MS | RTU 004 C MS | Conical | 850° | 1 7/64" | 1/64" | Plug | WX | 0000000 | 00000 |
| WXUP MS | RTU 008 C X MS | 30° Conical | 850° | 1 35/64" | 5/16" | Plug | WX | 0000000 | 00000 |
| WXUP MS | RTU 015 S MS | Chisel | 850° | 1 7/64" | 1/16" | Plug | WX | 0000000 | 00000 |
| WXUP MS | RTU 022 S MS | Chisel | 850° | 1 7/64" | 3/32" | Plug | WX | 0000000 | 00000 |
| WXUP MS | RTU 032 S MS | Chisel | 850° | 1 7/64" | 1/8" | Plug | WX | 0000000 | 00000 |
RTUS-MS Series | |||||||||
| WXUPS MS | RTUS 004 C MS | Conical | 850° | 1 5/64" | 3/64" | Plug | WXsmart | 0000000 | 00000 |
| WXUPS MS | RTUS 008 C MS | Conical | 850° | 1 9/64" | 3/64" | Plug | WXsmart | 0000000 | 00000 |
| WXUPS MS | RTUS 016 C MS | Conical | 850° | 1 5/64" | 1/64" | Plug | WXsmart | 0000000 | 00000 |
| WXUPS MS | RTUS 076 S MS | Chisel | 850° | 1 3/32" | 1/64" | Plug | WXsmart | 0000000 | 00000 |
| WXUPS MS | RTUS 093 S MS | Chisel | 850° | 1 3/32" | 1/64" | Plug | WXsmart | 0000000 | 00000 |
XHT Series | |||||||||
| WP200 | XHT C | Chisel | 850° | 1 7/8" | 1/8" | Plug | WR2, WT1H, WT2M | 0000000 | 00000 |
| WP200 | XHT D | Chisel | 850° | 1 7/8" | 13/64" | Plug | WR2, WT1H, WT2M | 0000000 | 00000 |
| WP200 | XHT E | Chisel | 850° | 1 7/8" | 19/64" | Plug | WR2, WT1H, WT2M | 0000000 | 00000 |
| WP200 | XHT F | Chisel | 850° | 1 7/8" | 3/8" | Plug | WR2, WT1H, WT2M | 0000000 | 00000 |
XNT Series | |||||||||
| WP65, WTP90, WXP65 | 1LX | Round | 850° | 1 43/64" | 1/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | 1SCNW | Chisel | 850° | 1 1/16" | 1/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | 1X | Round | 850° | 1 7/64" | 1/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | AX | Chisel | 850° | 1 7/64" | 1/16" | Plug | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | BX | Chisel | 850° | 1 7/16" | 3/32" | Plug | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | HX | 30° Chisel | 850° | 1 7/16" | 1/32" | Plug | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | L | Chisel | 850° | 1 15/32" | 1/8" | Plug | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
| WP65, WTP90, WXP65 | S | Conical | 850° | 1 15/32" | 1/64" | Plug | WR2, WR3M, WT1, WT1H, WT2M, WX | 00000000 | 00000 |
XT Series | |||||||||
| WP120, WXP120 | AA 60 | Bevel | 850° | 1 29/64" | 1/16" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BB 45 | Bevel | 850° | 1 29/64" | 3/32" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BS | Round | 850° | 1 29/64" | 3/32" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BSC | Chisel | 850° | 1 27/64" | 3/32" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BSL | Chisel | 850° | 1 27/64" | 3/32" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | BX | 30° Chisel | 850° | 1 13/32" | 5/32" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CC 45 | Bevel | 850° | 1 29/64" | 1/8" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CS | Round | 850° | 1 29/64" | 1/8" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | CSL | Chisel | 850° | 1 27/64" | 1/8" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | D 45 | 45° Chisel | 850° | 1 29/64" | 1/4" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | DL | Chisel | 850° | 1 37/64" | 3/16" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | DS | Round | 850° | 1 3/8" | 3/16" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | F 30 | Bevel | 850° | 1 29/64" | 3/64" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | GW1 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | GW2 | Gullwing | 850° | 1 29/64" | 1/32" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | H | Chisel | 850° | 1 29/64" | 1/32" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | HX | Chisel | 850° | 1 1/2" | 1/32" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | KN | Knife | 850° | 1 49/64" | 5/64" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
| WP120, WXP120 | MX | Chisel | 850° | 1 1/2" | 1/8" | Plug | WR2, WR3M, WT1H, WT2M, WX | 00000000 | 00000 |
Hot Air Irons for Soldering and Desoldering Stations
Solder a connection without touching it by melting the solder with hot air. These irons are great for connecting components on a circuit board that are sensitive to direct heat.
Weller Irons
Point | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model Number | Wattage | Temp. Range, °F | Airflow, cfm | Wd. | ID | Nozzle Connection Type | For Station Manufacturer Series | For Nozzle Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Cord Lg., ft. | Includes | Each | |
| HAP200 | 200W | 200° to 990° | 0.5 | 3/64" | 1/64" | Plug | WR3M | R | Continuous | 45 sec. | Plastic | 24V AC | 4 | One Nozzle | 0000000 | 0000000 |
| WXHAP200 | 200W | 200° to 990° | 0.7 | 3/64" | 1/32" | Plug | WXA2, WXsmart | R | Continuous | 45 sec. | Plastic | 24V AC | 4 | One Nozzle | 0000000 | 000000 |
Weller R Series Nozzles
Weller R
Point | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Iron Manufacturer Model Number | Manufacturer Model Number | Max. Temp., °F | Lg. | Wd. | ID | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| HAP200, WXHAP200 | R04 | 1000° | 41/64" | 3/64" | 1/32" | Plug | Hot Air | WR3M, WXA2, WXsmart | 0000000 | 000000 |
| HAP200, WXHAP200 | R06 | 1000° | 41/64" | 3/64" | 1/64" | Plug | Hot Air | WR3M, WXA2, WXsmart | 0000000 | 0000 |
Desoldering Irons for Soldering and Desoldering Stations
Remove solder from your workpiece. These irons plug into compatible soldering and desoldering stations and the nozzle heats up the solder.
Weller Irons
WXDP 120
Point | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Station Manufacturer Series | Manufacturer Model Number | Wattage | Temp. Range, °F | Wd. | ID | Nozzle Connection Type | For Nozzle Manufacturer Series | Duty Cycle | Approx. Heat-Up Time | Grip Material | Voltage | Cord Lg., ft. | Includes | Each | |
| WR2, WR3M | DXV 80 | 80W | 150° to 850° | 1/8" | 5/64" | Plug | DX | Continuous | 65 sec. | Rubber | 24V AC | 4 | One Nozzle | 0000000 | 0000000 |
| WXsmart | WXDP 120 | 120W | 200° to 840° | 3/32" | 1/16" | Plug | XDS | Continuous | 35 sec. | Rubber | 24V AC | 4 | One Nozzle | 0000000 | 000000 |
Weller DX Series Nozzles
Weller XDS Series Nozzles
Weller XDS
Point | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Iron Manufacturer Model Number | Manufacturer Model Number | Max. Temp., °F | Lg. | Wd. | ID | Connection Type | For Station Type | For Station Manufacturer Series | Each | |
| WXDP120 | XDS 1 | 1000° | 13/32" | 1/8" | 1/16" | Plug | Desoldering | WXsmart | 0000000 | 000000 |
Solder Wire Feeders
Automatically feed solder wire to the tip of your iron. Use the buttons on these feeders to adjust the feed rate. They have an indicating light that turns off when they’re feeding wire.
You’ll need a power supply (sold separately) to run these feeders. Choose one based on how many soldering tools you plan on using. Each tool will need one channel. WR power supplies automatically recognize your tools, so you can switch between a wire feeder, soldering iron, desoldering iron, or hot air iron without changing temperature settings. Use the USB connection to adjust standby temperature and the automatic shutoff timing. This also allows you to log soldering temperatures and update station firmware.
Feeders
Feeder
Chisel Tip
Tip | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wattage | Feed Rate, mm/s | For Wire Dia., mm | Max. Capacity, lbs. | Shape | Point Wd. | Connection Type | Temperature Range, °F | Display Increments | Duty Cycle | Approximate Heat-Up Time | Cord Lg., ft. | Includes | Features | Each | |
Weller WTSF80 | |||||||||||||||
| 80W | 1-27 | 0.5-1 | 2 | Chisel | 1/16" | Plug | 200° to 800° | 1° | Continuous | 10 sec. | 3 | One Tip | Indicating Light, Integrated Soldering Iron, ESD (Electrostatic Discharge) Safe | 0000000 | 000000000 |
Power Supplies
1 Channel
2 Channels
3 Channels
| Number of Channels | Wattage | Voltage | Manufacturer Model Number | Electrical Connection Type | Cord Lg., ft. | Features | Each | |
Weller | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 | 95W | 120V AC | WT1 | Plug | 3 | ESD (Electrostatic Discharge) Safe | 0000000 | 0000000 |
| 2 | 250W | 230V AC | WR2 | Plug | 3 | ESD (Electrostatic Discharge) Safe | 0000000 | 00000000 |
| 3 | 360W | 230V AC | WR3M | Plug | 3 | ESD (Electrostatic Discharge) Safe | 0000000 | 00000000 |
Tips
Conical
Round
30° Round
Bevel
Gullwing
Knife
45° Knife
Chisel
| Manufacturer Model Number | Tip Shape | Max. Temp., °F | Lg. | Point Wd. | Connection Type | Each | |
Weller LT Series | |||||||
|---|---|---|---|---|---|---|---|
| 1L | Conical | 850° | 1 1/32" | 1/64" | Plug | 00000000 | 00000 |
| 1SA | Round | 850° | 19/32" | 1/64" | Plug | 00000000 | 00000 |
| 1SLX | 30° Round | 850° | 55/64" | 1/64" | Plug | 00000000 | 00000 |
| 22CP | Bevel | 850° | 25/32" | 5/64" | Plug | 00000000 | 0000 |
| 33CP | Bevel | 850° | 25/32" | 1/8" | Plug | 00000000 | 00000 |
| 4 | Bevel | 850° | 19/32" | 3/64" | Plug | 00000000 | 00000 |
| BB | Bevel | 850° | 21/32" | 3/32" | Plug | 00000000 | 00000 |
| CC 60 | Bevel | 850° | 21/32" | 1/8" | Plug | 00000000 | 00000 |
| DD 45 | Bevel | 850° | 25/32" | 5/32" | Plug | 00000000 | 00000 |
| F | Bevel | 850° | 33/64" | 15/32" | Plug | 00000000 | 0000 |
| GW1 | Gullwing | 850° | 45/64" | 3/64" | Plug | 00000000 | 0000 |
| GW2 | Gullwing | 850° | 45/64" | 1/8" | Plug | 00000000 | 00000 |
| KN | Knife | 850° | 21/32" | 5/64" | Plug | 00000000 | 00000 |
| KNSL | 45° Knife | 850° | 21/32" | 5/64" | Plug | 00000000 | 00000 |
| LT1S | Round | 850° | 5/8" | 1/64" | Plug | 0000000 | 0000 |
| LTA | Chisel | 850° | 3/8" | 1/16" | Plug | 0000000 | 0000 |
| LTAS | Round | 850° | 3/8" | 1/16" | Plug | 0000000 | 0000 |
| LTB | Chisel | 850° | 1/2" | 3/32" | Plug | 0000000 | 0000 |
| LTC | Chisel | 850° | 1/2" | 1/8" | Plug | 0000000 | 0000 |
| LTCS | Round | 850° | 1/2" | 1/8" | Plug | 0000000 | 0000 |
| LTD | Chisel | 850° | 1/2" | 3/16" | Plug | 00000000 | 0000 |
| LTK | Chisel | 850° | 13/16" | 3/64" | Plug | 00000000 | 0000 |
| LTL | Chisel | 850° | 13/16" | 5/64" | Plug | 00000000 | 0000 |
| LTS | Conical | 850° | 13/16" | 1/64" | Plug | 00000000 | 0000 |