For Caster Mount Height For Caster Mount Height |
---|
Retracted Height Retracted Height |
---|
|
|
|
Extended Height Extended Height |
---|
|
|
|
Height Height |
---|
|
|
|
Mounting Location Mounting Location |
---|
|
Brake Retraction Pedal Location Brake RetractionPedal Location |
---|
|
Length Length |
---|
For Maximum Vehicle Weight For Maximum Vehicle Weight |
---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Finish Finish |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Floor Locks




Stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks bolt or weld to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.
Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.
Pivoting base compensates for uneven floors.
For technical drawings and 3-D models, click on a part number.




Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Caster Mount Ht. | Extended | Retracted | Clearance | Style | Lg. | Wd. | Lg. (A) | Lg. (B) | Wd. (A) | Wd. (B) | Mounting Fasteners Included | For Screw Size | Color | Each | |
Painted Iron | |||||||||||||||
5 5/8"-5 7/8" | 5 5/8" | 4 9/16" | 1 5/16" | 1 | 4 13/16" | 4 1/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | Gray | 00000000 | 0000000 |
7 1/4"-7 1/2" | 7 1/2" | 6" | 1 3/4" | 1 | 6 1/2" | 4 3/4" | 5 1/4" | 4 15/16" | 3 3/8" | 2 7/16" | No | 1/2" | Gray | 00000000 | 000000 |
10 1/4"-10 5/8" | 10 1/4" | 9 1/8" | 1 3/8" | 1 | 6 1/2" | 4 3/4" | 5 1/4" | 4 15/16" | 3 3/8" | 2 7/16" | No | 1/2" | Gray | 00000000 | 000000 |
![]() | ![]() | ![]() |
![]() Mounting Plate Style 1 | ![]() Mounting Plate Style 2 |
Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Caster Mount Ht. | Extended | Retracted | Clearance | Style | Lg. | Wd. | Ln. | Wd. | Lg. (A) | Lg. (B) | Wd. (A) | Wd. (B) | Mounting Fasteners Included | For Screw Size | Each | |
Zinc-Plated Steel | ||||||||||||||||
5 5/8" | 5 7/8" | 4 7/8" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 000000 |
6 1/2" | 6 3/4" | 5 3/4" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
7 1/4" | 7 1/2" | 6 1/2" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
7 3/8" | 7 5/8" | 6 3/8" | 1 1/4" | 2 | 5 1/2" | 5" | 4 1/2" | 4 1/8" | __ | __ | __ | __ | No | 3/8" | 0000000 | 000000 |
7 1/2" | 7 3/4" | 6 1/2" | 1 1/4" | 1 | 6 1/4" | 4 1/2" | __ | __ | 5 1/4" | 4 15/16" | 3 3/8" | 2 7/16" | No | 1/2" | 0000000 | 000000 |
7 1/2" | 7 3/4" | 6 3/4" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
9 1/2" | 9 3/4" | 8 1/2" | 1 1/4" | 2 | 5 1/2" | 5" | 4 1/2" | 4 1/8" | __ | __ | __ | __ | No | 3/8" | 0000000 | 000000 |
9 1/2" | 9 3/4" | 8 3/4" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
10 1/8" | 10 3/8" | 9 1/8" | 1 1/4" | 1 | 6 1/4" | 4 1/2" | __ | __ | 5 1/4" | 4 15/16" | 3 3/8" | 2 7/16" | No | 1/2" | 0000000 | 000000 |
10 1/8" | 10 3/8" | 9 3/8" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
10 1/2" | 10 3/4" | 9 1/2" | 1 1/4" | 1 | 7 1/4" | 5" | __ | __ | 6 1/8" | 5 1/4" | 4 1/8" | 3 3/8" | No | 1/2" | 0000000 | 000000 |
304 Stainless Steel | ||||||||||||||||
5 5/8" | 5 5/8" | 4 1/2" | 1 1/8" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 000000 |
6 1/2" | 6 1/2" | 5 3/8" | 1 1/8" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 000000 |
7 1/2" | 7 1/2" | 6 1/2" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 000000 |




Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Caster Mount Ht. | Extended | Retracted | Clearance | Style | Lg. | Wd. | Lg. (A) | Lg. (B) | Wd. (A) | Wd. (B) | Mounting Fasteners Included | For Screw Size | Each | |
Zinc-Plated Steel | ||||||||||||||
5 5/16"-5 1/2" | 5 5/8" | 4 7/8" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 000000 |
5 7/16"-5 5/8" | 5 3/4" | 5" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
6 3/16"-6 3/8" | 6 1/2" | 5 3/4" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
6 7/16"-6 5/8" | 6 3/4" | 6" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
6 15/16"-7 1/8" | 7 1/4" | 6 1/2" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
7 7/16"-7 5/8" | 7 3/4" | 7" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
9 7/16"-9 5/8" | 9 3/4" | 9" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |




Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Caster Mount Ht. | Extended | Retracted | Clearance | Style | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | For Screw Size | Color | Each | |
Painted Steel | |||||||||||||
5"-7" | 7 1/4" | 3 3/8" | 3 7/8" | 2 | 4" | 4" | 2 5/8" | 2 3/8" | No | 3/8" | Black | 0000000 | 0000000 |
Side-Mount Floor Locks





These locks bolt or weld to the side of equipment that can't accommodate a floor lock underneath. They're compatible with a wide range of caster mount heights. Use them to stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks have a spring-loaded base with a nonskid floor pad to keep equipment stationary.
Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.
For technical drawings and 3-D models, click on a part number.
Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Caster Mount Ht. | Extended | Retracted | Clearance | Lg. | Wd. | Lg. | Wd. (A) | Wd. (B) | Mounting Fasteners Included | For Screw Size | Each | |
Left Side Mounting | ||||||||||||
Top Retraction Pedal | ||||||||||||
Chrome-PlatedSteel | ||||||||||||
11" | 11 1/8" | 8 7/8" | 2" | 4 1/2" | 6 1/2" | 2 29/32" | 4 13/32" | 3 19/32" | No | 3/8" | 00000000 | 0000000 |
Right Side Mounting | ||||||||||||
Top Retraction Pedal | ||||||||||||
Chrome-PlatedSteel | ||||||||||||
11" | 11 1/8" | 8 7/8" | 2" | 4 1/2" | 6 1/2" | 2 29/32" | 4 13/32" | 3 19/32" | No | 3/8" | 000000000 | 000000 |
Adjustable-Height Floor Locks





Set these floor locks to the height you need to compensate for uneven and sloped floors. Use them to stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks bolt to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.
Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.
For technical drawings and 3-D models, click on a part number.
Mounting Plate | Mounting Hole Ctr.-to-Ctr. | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Caster Mount Ht. | Ht. Range | Clearance | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | For Screw Size | Each | |
Side Retraction Pedal | ||||||||||
Aluminum | ||||||||||
6 1/2"-7 1/2" | 5 1/2"-8" | 2 1/2" | 4 3/4" | 3 3/4" | 3 5/8", 3" | 3", 2 5/8" | No | 3/8" | 0000000 | 0000000 |
8"-10 1/2" | 7"-11" | 4" | 4 3/4" | 3 3/4" | 3 5/8", 3" | 3", 2 5/8" | No | 3/8" | 0000000 | 000000 |
Wheel Chocks
Keep wheels stationary while loading, unloading, and servicing vehicles. Chocks for wheel diameters 30" and larger are typically used for commercial vehicles, including semi-trucks and tractors. Chocks for wheel diameters under 30" are for use on small cars, trucks, and vans.
Styles B, E, and Y have two chocks connected by a rope.
Style Q consists of laminated rubber pads compressed between two steel plates.
Style R has a flag that inserts and lock on either side to indicate that chock is in use.
Styles F and Z have reflective sides for nighttime visibility.































For Max. Wheel Dia. | Lg. | Wd. | Ht. | Material | Color | For Max. Vehicle Wt., lbs. | Features | Specifications Met | Each | ||
A | 24" | 8" | 9" | 5 3/4" | Rubber | Orange | Not Rated | 1" ID Eyebolt | __ | 0000000 | 000000 |
A | 28" | 7 1/2" | 10" | 6" | Rubber | Black | Not Rated | 3/4" ID Eyebolt | __ | 0000000 | 00000 |
B | 16" | 5" | 10" | 4 3/8" | Rubber | Black | Not Rated | 3-ft. Long Polypropylene Rope | __ | 00000000 | 00000 |
C | 28" | 6 1/2" | 4" | 3 1/4" | Rubber | Black | Not Rated | Hollow Middle | __ | 0000000 | 00000 |
C | 28" | 6 1/2" | 6" | 3 1/4" | Rubber | Black | Not Rated | Hollow Middle | __ | 0000000 | 00000 |
C | 28" | 6 1/2" | 12" | 3 1/4" | Rubber | Black | Not Rated | Hollow Middle | __ | 0000000 | 00000 |
D | 28" | 6" | 9 1/2" | 3 7/8" | Plastic | Yellow | Not Rated | 27" Long Nylon Rope | __ | 000000 | 00000 |
E | 28" | 6" | 9 1/2" | 3 7/8" | Plastic | Yellow | Not Rated | 33" Long Nylon Rope | __ | 000000 | 00000 |
F | 28" | 4" | 10" | 4" | Rubber | Black | Not Rated | Reflective Sides | __ | 0000000 | 00000 |
F | 28" | 6" | 12" | 6" | Rubber | Black | Not Rated | Reflective Sides | __ | 0000000 | 00000 |
F | 28" | 6" | 30" | 6" | Rubber | Black | Not Rated | Reflective Sides | __ | 0000000 | 000000 |
G | 36" | 8 3/4" | 6" | 6" | Powder-Coated Aluminum | Yellow | 80,000 | __ | __ | 0000000 | 00000 |
H | 28" | 8 3/4" | 9" | 6" | Rubber | Black | Not Rated | 3/4" ID Eyebolt | __ | 000000 | 00000 |
J | 28" | 8" | 10" | 5 1/2" | Rubber | Black | Not Rated | Carrying Handle | __ | 0000000 | 00000 |
K | 24" | 7 7/8" | 9 1/4" | 6" | Rubber | Black | Not Rated | U-Bolt Handle | __ | 0000000 | 00000 |
L | 30" | 10" | 7 1/4" | 8" | Rubber | Black | 60,000 | 3/4" Dia. Hole | __ | 0000000 | 00000 |
M | 30" | 9 15/16" | 9 13/16" | 8 1/4" | Powder-Coated Steel | Yellow | Not Rated | 10-ft. Long Chain | __ | 0000000 | 00000 |
N | 30" | 11 1/4" | 7 3/4" | 8" | Polyurethane | Orange | Not Rated | 3/4" Dia. Hole | __ | 0000000 | 00000 |
P | 30" | 9 1/2" | 7 1/2" | 8 5/8" | Powder-Coated Steel | Yellow | Not Rated | __ | __ | 0000000 | 00000 |
Q | 30" | 8" | 8" | 8" | Rubber | Black | 60,000 | Anchor Plate with 5/8" Dia. Hole | __ | 0000000 | 00000 |
R | 33" | 10 3/4" | 7" | 8" | Powder-Coated Aluminum | Yellow | 80,000 | __ | __ | 0000000 | 000000 |
S | 28" | 11 3/4" | 7" | 8" | Aluminum | __ | Not Rated | Hollow Middle | __ | 0000000 | 00000 |
T | 32" | 10 3/4" | 8" | 9" | Powder-Coated Steel | Yellow | Not Rated | 1/2" Dia. Hole | __ | 000000 | 00000 |
U | 46" | 21" | 11 1/4" | 12 1/4" | Polyurethane | Yellow | 150,000 | __ | NFPA 1901, NFPA 1906 | 00000000 | 000000 |
V | 65" | 15" | 15" | 11" | Polyurethane | Yellow | 245,000 | 1 3/8" Dia. Hole, Antislip Surface | __ | 00000000 | 000000 |
W | 65" | 17" | 14" | 14" | Polyurethane | Orange | 245,000 | 1" Dia. Hole | __ | 0000000 | 000000 |
X | 105" | 17 3/4" | 15 1/4" | 10" | Polyurethane | Yellow | 550,000 | 1 1/8" Dia. Hole, Antislip Surface | __ | 0000000 | 000000 |
Y | 28" | 8 1/2" | 6" | 5 3/4" | Polyurethane | Orange | 30,000 | 35" Long Nylon Rope | __ | 00000000 | 00000 |
Y | 36" | 10 1/2" | 7" | 7 3/4" | Polyurethane | Orange | 60,000 | 40" Long Nylon Rope | __ | 00000000 | 00000 |
Z | 65" | 16" | 8" | 6" | Polyurethane | Orange | 100,000 | Reflective Sides, Glow-in-the-Dark Strip | __ | 00000000 | 000000 |
Z | 120" | 24" | 8" | 6" | Polyurethane | Orange | 100,000 | Reflective Sides, Glow-in-the-Dark Strip | __ | 00000000 | 000000 |
Pallet Truck Wheel Chocks


Keep pallet trucks upright and in place with these wheel chocks. They’re often used to stop pallet trucks from rolling while being transported, which prevents damage to the vehicle and the pallet truck. Since tipping pallet trucks on their side can cause hydraulic fluid to leak, these wheel chocks hold them upright.
Roll your wheels up the tapered side and into the recess, which keeps them from moving. Use the handle on the other side to carry the chocks, or to hang them for storage. Made of rubber, they’re durable and won’t slip.
For Max. Wheel Dia. | Lg. | Wd. | Ht. | Material | Color | Base Texture | Surface Texture | For Max. Vehicle Wt. | Features | Each | |
5 7/8" | 14" | 11 3/4" | 2" | Rubber | Black | Smooth | Smooth | Not Rated | Handle | 0000000 | 000000 |
Railcar Wheel Stops


Clamp these wheel stops to a rail to stop moving railcars at track ends and approaches to buildings and doors. No drilling is required for installation.
For Rail Size, lbs. per 3 ft. | For Wheel Dia. | For Max. Impact Speed, mph | Ht. Above Rail | Material | Pair | |
85-141 | 33"-42" | 3 | 13 1/2" | Iron | 0000000 | 000000000 |
Railcar Wheel Chocks






Chock the wheels on stationary railcars to keep them from moving during loading, unloading, and servicing. Chocks install quickly, without tools.
A flag indicates that chocks are in use.
Single chocks prevent forward motion.
Double chocks prevent forward and backward motion. They are connected by a chain; a rubber strap attaches to the chain and draws the chocks together.
For Rail | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Style | Size, lbs. per 3 ft. | For Wheel Dia. | Lg. | Ht. | Material | Color | Specifications Met | Features | Each | |
Single Chock | ||||||||||
Exposed | 75-141 | 28"-42" | 7 1/2" | 2 3/4" | Painted Steel | Safety Yellow | OSHA Compliant 29 CFR 1910.111, OSHA Compliant 29 CFR 1910.30, OSHA Compliant 29 CFR 1910.110 | Angled Handle | 0000000 | 0000000 |
Paved | 75-141 | 28"-42" | 7 1/2" | 2 3/4" | Painted Steel | Safety Yellow | OSHA Compliant 29 CFR 1910.111, OSHA Compliant 29 CFR 1910.30, OSHA Compliant 29 CFR 1910.110 | Angled Handle | 0000000 | 000000 |
Double Chock | ||||||||||
Exposed | 75-141 | 28"-42" | 5" | 2" | Painted Steel | Safety Yellow | OSHA Compliant 29 CFR 1910.111, OSHA Compliant 29 CFR 1910.30, OSHA Compliant 29 CFR 1910.110 | Angled Handle | 0000000 | 000000 |
Paved | 75-141 | 28"-42" | 5" | 2" | Painted Steel | Safety Yellow | OSHA Compliant 29 CFR 1910.111, OSHA Compliant 29 CFR 1910.30, OSHA Compliant 29 CFR 1910.110 | Angled Handle | 0000000 | 000000 |
For Rail | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Style | Size, lbs. per 3 ft. | For Wheel Dia. | Lg. | Ht. | Material | Color | Specifications Met | Distance Between Chock and Flag | Each | |
Single Chock | ||||||||||
Exposed | 75-141 | 28"-42" | 7 1/2" | 2 3/4" | Painted Steel | Safety Yellow | OSHA Compliant 29 CFR 1910.111, OSHA Compliant 29 CFR 1910.30, OSHA Compliant 29 CFR 1910.110 | 17" | 000000 | 0000000 |
Paved | 75-141 | 28"-42" | 7 1/2" | 2 3/4" | Painted Steel | Safety Yellow | OSHA Compliant 29 CFR 1910.111, OSHA Compliant 29 CFR 1910.30, OSHA Compliant 29 CFR 1910.110 | 17" | 000000 | 000000 |
Double Chock | ||||||||||
Exposed | 75-141 | 28"-42" | 5" | 2" | Painted Steel | Safety Yellow | OSHA Compliant 29 CFR 1910.111, OSHA Compliant 29 CFR 1910.30, OSHA Compliant 29 CFR 1910.110 | 17" | 000000 | 000000 |
Paved | 75-141 | 28"-42" | 5" | 2" | Painted Steel | Safety Yellow | OSHA Compliant 29 CFR 1910.111, OSHA Compliant 29 CFR 1910.30, OSHA Compliant 29 CFR 1910.110 | 17" | 000000 | 000000 |
Hinged Lockouts for Valve Hand Wheels

A hinged design makes mounting these lockouts easy. All prevent valve handles from turning. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.
For technical drawings and 3-D models, click on a part number.
For Hand Wheel Dia. | For Max. No. of Padlocks | For Max. Padlock Shackle Dia. | Temp. Range, ° F | Language | Message | Specifications Met | Choose a Color | Each | |
Plastic | |||||||||
---|---|---|---|---|---|---|---|---|---|
1"-2 1/2" | 1 | 3/8" | -25° to 200° | English, Spanish, French | Danger—Locked Out—Do Not Remove, Peligro—Bloqueado—No Remueva, Danger—Verrouillage—Ne Pas Enlever | OSHA Compliant 29 CFR 1910.147 | 00000000 | 000000 | |
2 1/2"-5" | 1 | 3/8" | -25° to 200° | English, Spanish, French | Danger—Locked Out—Do Not Remove, Peligro—Bloqueado—No Remueva, Danger—Verrouillage—Ne Pas Enlever | OSHA Compliant 29 CFR 1910.147 | 00000000 | 00000 | |
5"-6 1/2" | 1 | 3/8" | -25° to 200° | English, Spanish, French | Danger—Locked Out—Do Not Remove, Peligro—Bloqueado—No Remueva, Danger—Verrouillage—Ne Pas Enlever | OSHA Compliant 29 CFR 1910.147 | 00000000 | 00000 | |
6 1/2"-10" | 1 | 3/8" | -25° to 200° | English, Spanish, French | Danger—Locked Out—Do Not Remove, Peligro—Bloqueado—No Remueva, Danger—Verrouillage—Ne Pas Enlever | OSHA Compliant 29 CFR 1910.147 | 00000000 | 00000 | |
10"-13" | 1 | 3/8" | -25° to 200° | English, Spanish, French | Danger—Locked Out—Do Not Remove, Peligro—Bloqueado—No Remueva, Danger—Verrouillage—Ne Pas Enlever | __ | 00000000 | 00000 |
Nestable Lockouts for Valve Hand Wheels

Each lockout rotates into itself, making installation in tight spaces easier than other lockouts. All prevent valve handles from turning and include write-on labels. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.
For technical drawings and 3-D models, click on a part number.
For Hand Wheel Dia. | For Max. No. of Padlocks | For Max. Padlock Shackle Dia. | Temp. Range, ° F | Color | Language | Message | Specifications Met | Each | |
Plastic | |||||||||
---|---|---|---|---|---|---|---|---|---|
1"-3" | 2 | 9/32" | -50° to 350° | Red | English, Spanish, French | Danger—Do Not Operate, Peligro—No Usar, Danger—Ne Pas Utiliser | OSHA Compliant 29 CFR 1910.147 | 0000000 | 000000 |
2"-5" | 3 | 9/32" | -50° to 350° | Red | English, Spanish, French | Danger—Do Not Operate, Peligro—No Usar, Danger—Ne Pas Utiliser | OSHA Compliant 29 CFR 1910.147 | 0000000 | 00000 |
4"-6 1/2" | 4 | 9/32" | -50° to 350° | Red | English, Spanish, French | Danger—Do Not Operate, Peligro—No Usar, Danger—Ne Pas Utiliser | OSHA Compliant 29 CFR 1910.147 | 0000000 | 00000 |
6"-10" | 4 | 9/32" | -50° to 350° | Red | English, Spanish, French | Danger—Do Not Operate, Peligro—No Usar, Danger—Ne Pas Utiliser | OSHA Compliant 29 CFR 1910.147 | 0000000 | 00000 |
8"-13" | 4 | 9/32" | -50° to 350° | Red | English, Spanish, French | Danger—Do Not Operate, Peligro—No Usar, Danger—Ne Pas Utiliser | OSHA Compliant 29 CFR 1910.147 | 0000000 | 00000 |
Two-Piece Lockouts for Valve Hand Wheels

Use these lockouts to prevent valve handles from turning. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.
For technical drawings and 3-D models, click on a part number.
Parking Curbs


Curbs | Replacement Hardware | ||||||||
---|---|---|---|---|---|---|---|---|---|
Material | Lg., ft. | Wd. | Ht. | Mounting Hardware | Choose a Color | Each | Pkg. | ||
Screw-In Mount | |||||||||
Plastic | 6 | 6" | 4" | Fasteners for Asphalt and Concrete Included | 00000000 | 000000 | 00000000 | 000000 | |
Rubber | 4 | 6" | 4 1/2" | Fasteners for Asphalt Included | Black/Reflective Yellow | 00000000 | 00000 | 00000000 | 00000 |
Rubber | 6 | 6" | 4 1/4" | Fasteners for Asphalt Included | Black/Reflective Yellow | 00000000 | 00000 | 00000000 | 00000 |
Optional Hardware for installing Rubber Curbs on concrete | 00000000 | Pkg. | 000000 |