Filter by
For Wire Gauge
Crimping Action
For Crimp Shape
Electrical Connection
Ratcheting
For Connector Insulation
Crimping Slot Type
For Wire/Cable Type
Specifications Met
Export Control Classification Number (ECCN)
Performance
DFARS Specialty Metals
Connection Method
Military Specification
Mil. Spec. Pin-and-Sleeve Contact Ratchet Crimpers
 |
The ratchet applies the correct pressure to ensure a complete four-point crimp every time to adhere to strict MIL-C-22520/1 standards. Use these crimpers to attach open- and closed-barrel pin-and-sleeve contacts in connectors. Turn the knob to select the crimp depth for your specific wire gauge size.
For Wire Gauge (Connector Insulation) | For Wire Construction | For Pin-and-Sleeve Barrel Type | Lg. | Material | Grip Material | Features | Mil. Spec. | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Pin-and-Sleeve Connection | ||||||||||||
| 26-12 (Noninsulated) | Solid, Stranded | Open, Closed | 9 3/4" | Aluminum | Rubber | Adjustable Crimping Guide | MIL-C-22520/1 | SAE AS22520/1 | 6168T3 | 000000000 | ||
Pin-and-Sleeve Contact Ratchet Crimpers
 |
The ratchet applies the correct pressure to ensure a complete crimp every time when attaching pin-and-sleeve contacts in connectors. Use a screwdriver to change dies.
Crimpers | Replacement Die Sets | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Gauge (Connector Insulation) | For Wire Construction | For Current, amp | For Pin-and-Sleeve Barrel Type | Lg. | Material | Grip Material | Each | Each | ||||
For Pin-and-Sleeve Connection | ||||||||||||
| 20-10 (Insulated) 20-10 (Noninsulated) | Solid, Stranded | — | Open | 9" | Steel | ABS | 69555K65 | 000000 | 69555K74 | 000000 | ||
For Pin-and-Sleeve and AMP Connection | ||||||||||||
| 30-18 (Insulated) 30-18 (Noninsulated) | Solid, Stranded | — | Open | 8 1/2" | Steel | Polypropylene | 1809N61 | 00000 | ——— | 0 | ||
For Power Pole Connection | ||||||||||||
| 20-12 (Insulated) 20-12 (Noninsulated) | Solid, Stranded | 15, 30 | — | 9 1/4" | Steel | ABS | 69555K105 | 000000 | 69555K106 | 00000 | ||
Wire Ferrule Ratchet Crimpers
 |  |
Fixed Crimping Slot | Self-Adjusting Crimping Slot |
The ratchet in these crimpers applies the right amount of pressure to ensure a complete crimp in wire ferrules every time.
Fixed Crimping Slot—Crimpers with a fixed crimping slot have separate slots for each wire gauge.
Self-Adjusting Crimping Slot—Crimpers with a self-adjusting crimping slot automatically adjust to the proper crimp size for each wire gauge.
For Wire Gauge (Connector Insulation) | For Wire Construction | For Terminal | Lg. | Material | Grip Material | For Crimp Shape | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Fixed Crimping Slot | ||||||||||
For Terminal Connection | ||||||||||
| 24-10 (Insulated) 24-10 (Noninsulated) | Stranded | Wire Ferrule | 10" | Steel | Plastic | Trapezoid | 5722K18 | 0000000 | ||
| 22-12 (Insulated) 22-12 (Noninsulated) | Stranded | Wire Ferrule | 9" | Steel | ABS | Square | 5722K12 | 00000 | ||
Self-Adjusting Crimping Slot | ||||||||||
For Terminal Connection | ||||||||||
| 26-8 (Insulated) 26-8 (Noninsulated) | Stranded | Wire Ferrule | 7" | Steel | Rubber | Square | 5722K19 | 000000 | ||
Wire Ferrule Crimpers
 |  |
For Trapazoid Crimp | For Half Round Crimp |
For Wire Gauge (Connector Insulation) | For Wire Construction | For Terminal | Lg. | Material | Grip Material | For Crimp Shape | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Fixed Crimping Slot | ||||||||||
For Terminal Connection | ||||||||||
| 24-14 (Insulated) 24-14 (Noninsulated) | Stranded | Wire Ferrule | 5 3/4" | Steel | Plastic | Trapezoid | 5378N11 | 000000 | ||
| 24-6 (Insulated) 24-6 (Noninsulated) | Stranded | Wire Ferrule | 7 1/4" | Steel | Plastic | Half Round | 5378N12 | 00000 | ||
Terminal and Splice Ratchet Crimpers
|
The ratchet applies the correct pressure to ensure a complete crimp every time. Use a screwdriver to change dies.
Crimpers | Replacement Die Sets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Gauge (Connector Insulation) | For Wire Construction | For Terminal | Lg. | Material | Grip Material | Each | Each | ||||
For Terminal Connection | |||||||||||
| 22-10 (Insulated) | Solid, Stranded | Quick-Disconnect Terminal | 9" | Steel | Rubber | 69555K66 | 000000 | 69555K75 | 000000 | ||
For Terminal and Crimp-On Butt-Splice Connection | |||||||||||
| 22-10 (Insulated) | Solid, Stranded | Ring Terminal, Spade Terminal | 9" | Steel | Rubber | 69555K62 | 00000 | 69555K77 | 00000 | ||
| 22-10 (Heat Shrink) | Solid, Stranded | Ring Terminal, Spade Terminal | 9" | Steel | Vinyl Plastic | 69555K15 | 00000 | ——— | 0 | ||
| 20-8 (Noninsulated) | Solid, Stranded | Ring Terminal, Spade Terminal | 9" | Steel | Rubber | 69555K63 | 00000 | 69555K76 | 00000 | ||
For 90° Flag Terminal Connection | |||||||||||
| 22-14 (Insulated) | Solid, Stranded | Quick-Disconnect Terminal | 8 1/2" | Steel | Rubber | 69555K13 | 00000 | 69555K14 | 00000 | ||
Pin-and-Sleeve Contact Crimpers
 |
Crimp pin-and-sleeve contacts in connectors.
For Wire Gauge (Connector Insulation) | For Wire Construction | For Pin-and-Sleeve Barrel Type | Lg. | Material | Grip Material | Each | |||
|---|---|---|---|---|---|---|---|---|---|
For Pin-and-Sleeve Connection | |||||||||
| 24-14 (Insulated) | Stranded | Open | 8" | Steel | Vinyl Plastic | 7179K22 | 000000 | ||
For Pin-and-Sleeve and D-Sub Connection | |||||||||
| 30-16 (Noninsulated) | Stranded | Open | 8" | Steel | Vinyl Plastic | 7179K21 | 00000 | ||
For Pin-and-Sleeve, D-Sub, and DT Deutsch Style Connection | |||||||||
| 20-12 (Noninsulated) | Stranded | Open, Closed | 11" | Steel | Plastic | 6084T3 | 00000 | ||
Tight-Space Wire Ferrule Ratchet Crimpers
 |  |
For Trapezoid Crimp | For Square Crimp |
The ratchet on these tools applies the right amount of pressure to make sure the crimp is complete every time. Since you insert the wire ferrule from the front, they're useful in tight spaces. They automatically adjust to the proper crimp size for different wire ferrules.
For Wire Gauge (Connector Insulation) | For Wire Construction | For Terminal | Lg. | Crimp Lg. | Material | Grip Material | For Crimp Shape | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Self-Adjusting Crimping Slot | |||||||||||
For Terminal Connection | |||||||||||
| 26-8 (Insulated) 26-8 (Noninsulated) | Stranded | Wire Ferrule | 7" | 0.71" | Steel | Plastic | Trapezoid | 5722K13 | 0000000 | ||
| 28-8 (Insulated) 28-8 (Noninsulated) | Stranded | Wire Ferrule | 7 1/2" | 0.42" | Steel | PVC | Square | 5722K16 | 000000 | ||
Electrical Wire Stripper/Crimpers
With Bolt Cutter and Wire Cutter
 |
Steel—Steel tools stay sharp with continuous use.
Stainless Steel—Stainless steel tools are good for less frequent use. Their stripping blades dull more quickly than steel tools, but they resist corrosion and won't rust as quickly when stored.
Stripper | Crimper | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Solid Wire Ga. | For Stranded Wire Ga. | For Wire Gauge (Connector Insulation) | For Connection Type | For Bolt Thread Size | Lg. | Grip Material | Each | |||
Steel | ||||||||||
| 20-8 | 22-10 | 22-10 (Insulated) 22-10 (Noninsulated) | Terminal | 4-40, 6-32, 8-32, 10-24, 10-32 | 8 1/4" | PVC | 7007K95 | 000000 | ||
| 18-10 | 18-10 | 16-12 (Insulated) 16-12 (Noninsulated) | Terminal | M2.6, M3, M3.5, M4, M5 | 9 1/2" | Plastic | 7007K13 | 00000 | ||
Stainless Steel | ||||||||||
| 22-8 | 24-10 | 26-10 (Insulated) 22-10 (Noninsulated) | Terminal | 4-40, 6-32, 8-32, 10-24, 10-32 | 9" | Rubber | 7007K11 | 00000 | ||
With Plier Nose, Bolt Cutter, and Wire Cutter
 |
Tools with a plier nose are useful for pulling and looping wire.
Steel—Steel tools stay sharp with continuous use.
Stainless Steel—Stainless steel tools are good for less frequent use. Their stripping blades dull more quickly than steel tools, but they resist corrosion and won't rust as quickly when stored.
Stripper | Crimper | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Solid Wire Ga. | For Stranded Wire Ga. | For Wire Gauge (Connector Insulation) | For Connection Type | For Bolt Thread Size | Lg. | Grip Material | Each | |||
Steel | ||||||||||
| 26-10 | 28-12 | 22-10 (Insulated) 22-10 (Noninsulated) | Terminal | 6-32, 8-32 | 7 3/4" | Vinyl Plastic | 7007K14 | 000000 | ||
| 22-10 | 22-10 | 22-10 (Insulated) 22-10 (Noninsulated) | Terminal | 5-40, 6-32, 8-32, 10-24, 10-32 | 8 1/4" | PVC | 69275K84 | 00000 | ||
Stainless Steel | ||||||||||
| 20-10 | 22-12 | 22-10 (Insulated) 22-10 (Noninsulated) | Terminal | 5-40, 6-32, 8-32, 10-24, 10-32 | 8 1/2" | Rubber | 7007K12 | 00000 | ||
With Plier Nose, Bolt Cutter, Wire Cutter, and Voltage Detector
 |
Tools with a plier nose are useful for pulling and looping wire.
Tools with a voltage detector safely test for AC voltage without contacting live wires. Light and sound indicators alert you when over 50 volts AC is detected. The detector is attached to the tool’s handle; remove it from the handle to use it on its own.
Stainless Steel—Stainless steel tools are good for less frequent use. Their stripping blades dull more quickly than steel tools, but they resist corrosion and won't rust as quickly when stored.
Stripper | Crimper | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Solid Wire Ga. | For Stranded Wire Ga. | For Wire Gauge (Connector Insulation) | For Connection Type | For Bolt Thread Size | Lg. | Grip Material | Batteries Included | Each | |||
Stainless Steel | |||||||||||
| 20-8 | 20-8 | 20-8 (Insulated) 20-8 (Noninsulated) | Terminal | 4-40, 5-40, 6-32, 8-32, 10-24, 10-32 | 8" | Polypropylene | Yes | 69275K87 | 000000 | ||
Tight-Space Wire Ferrule Crimpers
 |
Insert wire ferrules from the front to crimp in tight spots.
For Wire Gauge (Connector Insulation) | For Wire Construction | For Terminal | Lg. | Crimp Lg. | Material | Grip Material | For Crimp Shape | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Fixed Crimping Slot | |||||||||||
For Terminal Connection | |||||||||||
| 20-10 (Insulated) 20-10 (Noninsulated) | Stranded | Wire Ferrule | 7 1/4" | 0.55" | Steel | Plastic | Trapezoid | 4958N11 | 000000 | ||
Electrically-Insulating Terminal and Splice Crimpers
 |
The insulated handles on these crimpers protect against shock from accidental contact with live electrical circuits. They’re tested to 1,000 volts to meet IEC 60900 and ASTM F1505. They look like normal pliers, but they have a built-in crimping die.
For Wire Gauge (Connector Insulation) | For Wire Construction | Lg. | Material | Grip Material | Features | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
For Terminal and Crimp-On Butt-Splice Connection | ||||||||||
| 22-10 (Insulated) 22-10 (Noninsulated) | Solid, Stranded | 10 1/2" | Steel | Rubber | Wire Cutter | IEC 60900, ASTM F1505 | 7289K2 | 000000 | ||
Electrically-Insulating Wire Ferrule Crimpers
 |
Because these crimpers have insulated handles, they protect against shock from accidental contact with live circuits when crimping wire ferrules. They’re tested to 1,000 volts to meet IEC 60900.
For Wire Gauge (Connector Insulation) | For Wire Construction | For Terminal | Lg. | Material | Grip Material | For Crimp Shape | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Fixed Crimping Slot | |||||||||||
For Terminal Connection | |||||||||||
| 24-14 (Insulated) 24-14 (Noninsulated) | Stranded | Wire Ferrule | 5 3/4" | Steel | Plastic | Trapezoid | IEC 60900 | 5394N11 | 000000 | ||
Cordless Terminal and Splice Crimpers
 |  |
Unlike ratchet crimpers that require repetitive motion, these battery-operated crimpers quickly create crimps with a press of the trigger. Release the trigger and their jaws automatically open for the next crimp. Use them to take on your high-volume crimping tasks. You can also press the trigger part-way down to adjust your connector to the ideal position before making the complete crimp. An LED light illuminates workspaces, so you can accurately position connectors with the required dies (sold separately). Keep multiple dies on hand for the flexibility to crimp a wide range of butt-splice connectors and ring and spade terminals.
Crimpers | Replacement Batteries | Replacement Chargers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Gauge (Connector Insulation) | For Wire Construction | For Terminal | Lg. | Material | Handle Material | Batteries Included | Battery Charger Included | Each | Each | Each | |||||
For Terminal and Crimp-On Butt-Splice Connection | |||||||||||||||
Lithium Ion (Li-Ion) Battery | |||||||||||||||
| 26-10 (Insulated) 26- 8 (Noninsulated) | Solid, Stranded | Ring Terminal, Spade Terminal | 10" | Steel | Rubber | Yes | Yes | 4962N11 | 0000000 | 4962N16 | 0000000 | 4962N17 | 0000000 | ||
Squeeze-and-Strip Electrical Wire Stripper/Crimpers
With Self-Adjusting Blades and Wire Cutter
 |
Stripper | Crimper | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Solid Wire Ga. | For Stranded Wire Ga. | For Wire Gauge (Connector Insulation) | For Connection Type | Max. Strip Lg. | Lg. | Grip Material | Each | |||
Steel | ||||||||||
| 24-10 | 24-10 | 16-10 (Insulated) 16-10 (Noninsulated) | Terminal | 3/4" | 9" | PVC | 8372K11 | 000000 | ||
Electrically-Insulating Electrical Wire Stripper/Crimpers
With Plier Nose, Bolt Cutter, and Wire Cutter
 |
Stripper | Crimper | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Solid Wire Ga. | For Stranded Wire Ga. | For Wire Gauge (Connector Insulation) | For Connection Type | For Bolt Thread Size | Lg. | Grip Material | Specs. Met | Each | |||
Steel | |||||||||||
| 22-10 | 22-10 | 16-10 (Insulated) 22-18 (Noninsulated) | Terminal | 4-40, 5-40, 6-32, 8-32, 10-24, 10-32 | 9" | Rubber | IEC 60900, ASTM F1505 | 6908K87 | 000000 | ||
Terminal and Splice Crimpers
 |
They may look like normal pliers, but these tools have a built-in crimping die.
For Wire Gauge (Connector Insulation) | For Wire Construction | Lg. | Material | Grip Material | Features | Each | |||
|---|---|---|---|---|---|---|---|---|---|
For Terminal and Crimp-On Butt-Splice Connection | |||||||||
| 22-10 (Insulated) 22-10 (Noninsulated) | Solid, Stranded | 9 1/2" | Steel | PVC | Wire Cutter | 7289K1 | 000000 | ||
High-Force Terminal and Splice Ratchet Crimpers
 |
With one ton of compression force and an ergonomic design, this crimper reduces fatigue when crimping. The ratchet applies the correct pressure to ensure a complete crimp every time. Use a Torx driver to change dies.
Crimpers | Replacement Die Sets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Gauge (Connector Insulation) | For Wire Construction | For Terminal | Compression Force, tonf | Lg. | Material | Each | Each | ||||
For Terminal and Crimp-On Butt-Splice Connection | |||||||||||
| 22-10 (Insulated) | Solid, Stranded | Ring Terminal, Spade Terminal | 1 | 10" | Steel | 69555K64 | 0000000 | 69555K78 | 000000 | ||
| 22-10 (Insulated; Heat Shrink) | Solid, Stranded | Ring Terminal | 1 | 10" | Steel | 69555K501 | 000000 | 69555K502 | 00000 | ||
| 22-10 (Noninsulated) | Solid, Stranded | Quick-Disconnect Terminal | 1 | 10" | Steel | 69555K503 | 000000 | 69555K504 | 000000 | ||
