Distribute power from one electronic device to several others with these connectors. By housing multiple outlets in a single unit, they save space and time spent on installation.

Switch your device on and off without needing a separate switch. These connectors work with industry standard cords often found on power supplies, appliances, and other electronic devices.

Send power to your device using the inlet, then route power to another device through the outlet—all with standard IEC power cords.

Change AC voltage to DC voltage and bring power to electronic devices while protecting them from harmful electromagnetic interference (EMI).

Use these connectors in general purpose residential and commercial applications.

These receptacles are for light-duty use.

Create a streamlined appearance—the flat face lies flush with your wall plate.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Install these receptacles indoors. They keep personnel safe from electric shock by adding ground fault protection.

Charge mobile devices without an adapter.

Prevent damage to electronic equipment caused by spikes in voltage.

Reduce the likelihood of an electrical fire. Receptacles interrupt power when an electric arc is detected.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. When mated with a receptacle, these plugs have an extra-tight fit to withstand high vibration. Also known as hospital grade plugs.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Prevent damage to electronic equipment caused by spikes in current. Mount these receptacles to DIN rail.