Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications.

Join wires and cables in some of the dirtiest and wettest locations—from paper mills to marine environments—without special tools.

Filled with gel, these wire taps seal out moisture.

Taps connect to wires with male quick-disconnect terminals.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire. Convenient for applications that require frequent connections, these terminals slide together and pull apart with ease.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated. When heat is applied, the insulation shrinks, forming a seal to keep out water and contaminants. The enclosed solder also melts when heated, creating the most secure and electrically conductive connection we offer.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

A plastic cover on the barrel provides electrical insulation.

A plastic cover provides electrical insulation.

When heat is applied, the insulation shrinks and creates a seal that keeps out water, salt, and contaminants.

Divide one male quick disconnect connection into two.

Terminals fit into 0.042" dia. holes so you can make connections to a circuit board.